Re: [PATCH v3] sh: avoid using IRQ0 on SH3/4

[Sergey Shtylyov]

On 4/29/22 8:16 PM, Rich Felker wrote:

[...]
>>> Using IRQ0 by the platform devices is going to be disallowed soon (see [1])
>>> and even now, when IRQ0 is about to be returned by platfrom_get_irq(), you
>>> see a big warning.  The code supporting SH3/4 SoCs maps the IRQ #s starting
>>> at 0 -- modify that code to start the IRQ #s from 16 instead.
>>>
>>> The patch should mostly affect the AP-SH4A-3A/AP-SH4AD-0A boards as they
>>> indeed use IRQ0 for the SMSC911x compatible Ethernet chip...
>>
>> Maybe try getting it landed through Andrew Morton's tree?
> 
> Hi. I'm alive and looking at it. If it needs to go in for this cycle I
> will send a pull request for just this and anything else critical. Was

   Well, now using IRQ0 just causes a WARNing in platform_get_irq() -- I don't
think fixing it is critical enough. Starting from 5.19-rc1 the SMSC91xx driver
should stop working on the mentioned boards.
   But let me look at the SMSC driver itself, I haven't done this yet...

> trying to get to it last night but had some unpleasant surprises come
> up that took me away from the computer.

   :-(

> Rich

MBR, Sergey