Re: [PATCH 1/3] arm64: dts: rockchip: enable otg/drd operation of usb_host0_xhci in rk356x

[Nicolas Frattaroli]

On Montag, 25. April 2022 15:35:00 CEST Michael Riesch wrote:
> This USB 3.0 controller is capable of OTG/DRD operation. Enable it in the
> device tree.
> 
> Signed-off-by: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/rockchip/rk356x.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> index 55e6dcb948cc..f611aaf2d238 100644
> --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> @@ -266,7 +266,7 @@ usb_host0_xhci: usb@fcc00000 {
>  			 <&cru ACLK_USB3OTG0>;
>  		clock-names = "ref_clk", "suspend_clk",
>  			      "bus_clk";
> -		dr_mode = "host";
> +		dr_mode = "otg";
>  		phy_type = "utmi_wide";
>  		power-domains = <&power RK3568_PD_PIPE>;
>  		resets = <&cru SRST_USB3OTG0>;
> 

Hi Michael,

according to official specs[1], only the RK3568 is capable of using the
USB 3.0 controller in OTG mode. For the RK3566, OTG is USB 2.0, if I
understand this correctly.

So I think this should be an override in rk3568.dtsi.

Regards,
Nicolas Frattaroli

[1]: Compare page 17 of the RK3568 datasheet to page 16 of the RK3566
     datasheet