[PATCH V4 1/2] EDAC/synopsys: Disable the error interrupt on Synopsys EDAC v3.x hardware

[Sherry Sun]

v3.x Synopsys EDAC DDR doesn't have the QOS Interrupt register, change
to use the ECC Clear Register to disable the error interrupts.

Fixes: f7824ded4149 ("EDAC/synopsys: Add support for version 3 of the Synopsys EDAC DDR")
Signed-off-by: Sherry Sun <sherry.sun@xxxxxxx>
Reviewed-by: Shubhrajyoti Datta <Shubhrajyoti.datta@xxxxxxxxxx>
Acked-by: Michal Simek <michal.simek@xxxxxxxxxx>
---
Changes in V4:
1. Add Fixes tag.
---
 drivers/edac/synopsys_edac.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/edac/synopsys_edac.c b/drivers/edac/synopsys_edac.c
index 40b1abeca856..88a481043d4c 100644
--- a/drivers/edac/synopsys_edac.c
+++ b/drivers/edac/synopsys_edac.c
@@ -865,8 +865,11 @@ static void enable_intr(struct synps_edac_priv *priv)
 static void disable_intr(struct synps_edac_priv *priv)
 {
 	/* Disable UE/CE Interrupts */
-	writel(DDR_QOSUE_MASK | DDR_QOSCE_MASK,
-			priv->baseaddr + DDR_QOS_IRQ_DB_OFST);
+	if (priv->p_data->quirks & DDR_ECC_INTR_SELF_CLEAR)
+		writel(0x0, priv->baseaddr + ECC_CLR_OFST);
+	else
+		writel(DDR_QOSUE_MASK | DDR_QOSCE_MASK,
+		       priv->baseaddr + DDR_QOS_IRQ_DB_OFST);
 }
 
 static int setup_irq(struct mem_ctl_info *mci,
-- 
2.17.1