Re: [PATCH v3 0/2] DSS: Add support for DisplayPort

From: Vignesh Raghavendra
Date: Fri Apr 15 2022 - 03:21:39 EST




On 06/04/22 10:28 pm, Rahul T R wrote:
> The following series of patches enables DisplayPort on
> j721e-evm
>
> Tomi Valkeinen (2):
> arm64: dts: ti: k3-j721e-main: add DP & DP PHY
> arm64: dts: ti: k3-j721e-common-proc-board: add DP to j7 evm
>
> v2:
> - use phandle with a parameter to refer clocks insted of
> sub nodes in serdes_wiz node
> - move phy link node to board DTS file
>
> v3:
> - Fix the regulator node name as per the DT spec
> - Use Macro for GPIO type
>
> boot logs:
> https://gist.githubusercontent.com/ravi-rahul/1bdbc3f77ab381e486c8394650c2e85d/raw/f04584c30181821c4ee83aee7781a9ba143cd3f3/j7_DP_upstream.log
>
> kernel patch verify report:
> https://gist.githubusercontent.com/ravi-rahul/a982fef3fae03ec0dbdd5cb475a4cb25/raw/c8230370746e9878daf9527c3aa9d82eed7aa33c/report-kernel-patch-verify.txt

Hmm, With dtbs_check I see (on v5.18-rc1 tag)

+/workdir/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dtb: dp-bridge@a000000: ports: 'port@0' is a required property
+/workdir/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dtb: dp-bridge@a000000: ports: 'port@4' is a required property
+/workdir/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dtb: dp-bridge@a000000: 'phys' is a required property
+/workdir/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dtb: dp-bridge@a000000: 'phy-names' is a required property

This goes away with 2/2 although adds:
+<stdout>: Warning (graph_child_address): /bus@100000/dss@4a00000/ports: graph node has single child node 'port@0', #address-cells/#size-cells are not necessary


Do we need to have empty ports node in j721e-main.dtsi for dp-bridge? And something similar wrt phys as well?

Regards
Vignesh

>
> .../dts/ti/k3-j721e-common-proc-board.dts | 78 ++++++++++++++++++-
> arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 65 ++++++++++++++++
> 2 files changed, 139 insertions(+), 4 deletions(-)
>