[PATCH 5/7] arm64: dts: qcom: sm8450: Add qup nodes for qup2

From: Vinod Koul
Date: Thu Apr 14 2022 - 06:17:39 EST

Next message: Vincent Guittot: "Re: Scheduling tasks on idle cpu"
Previous message: Vinod Koul: "[PATCH 7/7] arm64: dts: qcom: sm8450-qrd: Enable spi and i2c nodes"
In reply to: Vinod Koul: "[PATCH 7/7] arm64: dts: qcom: sm8450-qrd: Enable spi and i2c nodes"
Next in thread: Vinod Koul: "[PATCH 3/7] arm64: dts: qcom: sm8450: Add qup nodes for qup0"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

qup2 has 7 SEs, so add the SEs (i2c and spi) along with pinconf for
these SEs

Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8450.dtsi | 396 +++++++++++++++++++++++++++
1 file changed, 396 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 3097a6e3ab4e..067568c13448 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -729,6 +729,299 @@ gpi_dma2: dma-controller@800000 {
status = "disabled";
};

+ qupv3_id_2: geniqup@8c0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0x0 0x008c0000 0x0 0x2000>;
+ clock-names = "m-ahb", "s-ahb";
+ clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+ iommus = <&apps_smmu 0x483 0x0>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ i2c15: i2c@880000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x00880000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c15_data_clk>;
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 0 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ spi15: spi@880000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x00880000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
+ spi-max-frequency = <50000000>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
+ interconnect-names = "qup-core", "qup-config";
+ dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 0 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c16: i2c@884000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x00884000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c16_data_clk>;
+ interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 1 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ spi16: spi@884000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x00884000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+ interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi16_data_clk>, <&qup_spi16_cs>;
+ spi-max-frequency = <50000000>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
+ interconnect-names = "qup-core", "qup-config";
+ dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 1 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c17: i2c@888000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x00888000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c17_data_clk>;
+ interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 2 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ spi17: spi@888000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x00888000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+ interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi17_data_clk>, <&qup_spi17_cs>;
+ spi-max-frequency = <50000000>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
+ interconnect-names = "qup-core", "qup-config";
+ dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 2 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c18: i2c@88c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x0088c000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c18_data_clk>;
+ interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 3 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ spi18: spi@88c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x0088c000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+ interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi18_data_clk>, <&qup_spi18_cs>;
+ spi-max-frequency = <50000000>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
+ interconnect-names = "qup-core", "qup-config";
+ dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 3 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c19: i2c@890000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x00890000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c19_data_clk>;
+ interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 4 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ spi19: spi@890000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00890000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+ interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi19_data_clk>, <&qup_spi19_cs>;
+ spi-max-frequency = <50000000>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
+ interconnect-names = "qup-core", "qup-config";
+ dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 4 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c20: i2c@894000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x00894000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c20_data_clk>;
+ interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 5 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ spi20: spi@894000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00894000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+ interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi20_data_clk>, <&qup_spi20_cs>;
+ spi-max-frequency = <50000000>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
+ interconnect-names = "qup-core", "qup-config";
+ dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 5 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c21: i2c@898000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x00898000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c21_data_clk>;
+ interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma2 0 6 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 6 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ spi21: spi@898000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00898000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+ interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi21_data_clk>, <&qup_spi21_cs>;
+ spi-max-frequency = <50000000>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
+ interconnect-names = "qup-core", "qup-config";
+ dmas = <&gpi_dma2 0 6 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 6 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
gpi_dma0: dma-controller@900000 {
compatible = "qcom,sm8450-gpi-dma";
#dma-cells = <3>;
@@ -1754,6 +2047,41 @@ qup_i2c14_data_clk: qup-i2c14-data-clk {
bias-pull-up;
};

+ qup_i2c15_data_clk: qup-i2c15-data-clk {
+ pins = "gpio56", "gpio57";
+ function = "qup15";
+ };
+
+ qup_i2c16_data_clk: qup-i2c16-data-clk {
+ pins = "gpio60", "gpio61";
+ function = "qup16";
+ };
+
+ qup_i2c17_data_clk: qup-i2c17-data-clk {
+ pins = "gpio64", "gpio65";
+ function = "qup17";
+ };
+
+ qup_i2c18_data_clk: qup-i2c18-data-clk {
+ pins = "gpio68", "gpio69";
+ function = "qup18";
+ };
+
+ qup_i2c19_data_clk: qup-i2c19-data-clk {
+ pins = "gpio72", "gpio73";
+ function = "qup19";
+ };
+
+ qup_i2c20_data_clk: qup-i2c20-data-clk {
+ pins = "gpio76", "gpio77";
+ function = "qup20";
+ };
+
+ qup_i2c21_data_clk: qup-i2c21-data-clk {
+ pins = "gpio80", "gpio81";
+ function = "qup21";
+ };
+
qup_spi0_cs: qup-spi0-cs {
pins = "gpio3";
function = "qup0";
@@ -1906,6 +2234,74 @@ qup_spi15_data_clk: qup-spi15-data-clk {
function = "qup15";
};

+ qup_spi16_cs: qup-spi16-cs {
+ pins = "gpio63";
+ function = "qup16";
+ };
+
+ qup_spi16_data_clk: qup-spi16-data-clk {
+ pins = "gpio60", "gpio61", "gpio62";
+ function = "qup16";
+ };
+
+ qup_spi17_cs: qup-spi17-cs {
+ pins = "gpio67";
+ function = "qup17";
+ };
+
+ qup_spi17_data_clk: qup-spi17-data-clk {
+ pins = "gpio64", "gpio65", "gpio66";
+ function = "qup17";
+ };
+
+ qup_spi18_cs: qup-spi18-cs {
+ pins = "gpio71";
+ function = "qup18";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi18_data_clk: qup-spi18-data-clk {
+ pins = "gpio68", "gpio69", "gpio70";
+ function = "qup18";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi19_cs: qup-spi19-cs {
+ pins = "gpio75";
+ function = "qup19";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi19_data_clk: qup-spi19-data-clk {
+ pins = "gpio72", "gpio73", "gpio74";
+ function = "qup19";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi20_cs: qup-spi20-cs {
+ pins = "gpio79";
+ function = "qup20";
+ };
+
+ qup_spi20_data_clk: qup-spi20-data-clk {
+ pins = "gpio76", "gpio77", "gpio78";
+ function = "qup20";
+ };
+
+ qup_spi21_cs: qup-spi21-cs {
+ pins = "gpio83";
+ function = "qup21";
+ };
+
+ qup_spi21_data_clk: qup-spi21-data-clk {
+ pins = "gpio80", "gpio81", "gpio82";
+ function = "qup21";
+ };
+
qup_uart7_rx: qup-uart7-rx {
pins = "gpio26";
function = "qup7";
--
2.34.1

Next message: Vincent Guittot: "Re: Scheduling tasks on idle cpu"
Previous message: Vinod Koul: "[PATCH 7/7] arm64: dts: qcom: sm8450-qrd: Enable spi and i2c nodes"
In reply to: Vinod Koul: "[PATCH 7/7] arm64: dts: qcom: sm8450-qrd: Enable spi and i2c nodes"
Next in thread: Vinod Koul: "[PATCH 3/7] arm64: dts: qcom: sm8450: Add qup nodes for qup0"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]