Re: [PATCH v5 06/10] Docs: KVM: Add doc for the bitmap firmware registers

From: Raghavendra Rao Ananta
Date: Wed Apr 13 2022 - 13:02:19 EST


On Tue, Apr 12, 2022 at 11:40 PM Gavin Shan <gshan@xxxxxxxxxx> wrote:
>
> Hi Raghavendra,
>
> On 4/7/22 9:16 AM, Raghavendra Rao Ananta wrote:
> > Add the documentation for the bitmap firmware registers in
> > hypercalls.rst and api.rst. This includes the details for
> > KVM_REG_ARM_STD_BMAP, KVM_REG_ARM_STD_HYP_BMAP, and
> > KVM_REG_ARM_VENDOR_HYP_BMAP registers.
> >
> > Since the document is growing to carry other hypercall related
> > information, make necessary adjustments to present the document
> > in a generic sense, rather than being PSCI focused.
> >
> > Signed-off-by: Raghavendra Rao Ananta <rananta@xxxxxxxxxx>
> > ---
> > Documentation/virt/kvm/api.rst | 17 ++++
> > Documentation/virt/kvm/arm/hypercalls.rst | 95 ++++++++++++++++++-----
> > 2 files changed, 94 insertions(+), 18 deletions(-)
> >
> > diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst
> > index d13fa6600467..e0107b157965 100644
> > --- a/Documentation/virt/kvm/api.rst
> > +++ b/Documentation/virt/kvm/api.rst
> > @@ -2542,6 +2542,23 @@ arm64 firmware pseudo-registers have the following bit pattern::
> >
> > 0x6030 0000 0014 <regno:16>
> >
> > +arm64 bitmap feature firmware pseudo-registers have the following bit pattern::
> > +
> > + 0x6030 0000 0016 <regno:16>
> > +
> > +The bitmap feature firmware registers exposes the hypercall services that are
> > +available for userspace to configure. The set bits corresponds to the services
> > +that are available for the guests to access. By default, KVM sets all the
> > +supported bits during VM initialization. The userspace can discover the
> > +available services via KVM_GET_ONE_REG, and write-back the bitmap corresponding
> > +to the features that it wishes guests to see via KVM_SET_ONE_REG.
> > +
> > +Note: These registers are immutable once any of the vCPUs of the VM has run at
> > +least once. A KVM_SET_ONE_REG in such a scenario will return a -EBUSY to userspace.
> > +If there's no change in the value that's being written, 0 (success) is returned.
> > +
> > +(See Documentation/virt/kvm/arm/hypercalls.rst for more details.)
> > +
> > arm64 SVE registers have the following bit patterns::
> >
> > 0x6080 0000 0015 00 <n:5> <slice:5> Zn bits[2048*slice + 2047 : 2048*slice]
> > diff --git a/Documentation/virt/kvm/arm/hypercalls.rst b/Documentation/virt/kvm/arm/hypercalls.rst
> > index d52c2e83b5b8..ccda9fc2d253 100644
> > --- a/Documentation/virt/kvm/arm/hypercalls.rst
> > +++ b/Documentation/virt/kvm/arm/hypercalls.rst
> > @@ -1,32 +1,32 @@
> > .. SPDX-License-Identifier: GPL-2.0
> >
> > -=========================================
> > -Power State Coordination Interface (PSCI)
> > -=========================================
> > +=======================
> > +ARM Hypercall Interface
> > +=======================
> >
> > -KVM implements the PSCI (Power State Coordination Interface)
> > -specification in order to provide services such as CPU on/off, reset
> > -and power-off to the guest.
> > +KVM handles the hypercall services as requested by the guests. New hypercall
> > +services are regularly made available by the ARM specification or by KVM (as
> > +vendor services) if they make sense from a virtualization point of view.
> >
> > -The PSCI specification is regularly updated to provide new features,
> > -and KVM implements these updates if they make sense from a virtualization
> > -point of view.
> > -
> > -This means that a guest booted on two different versions of KVM can
> > -observe two different "firmware" revisions. This could cause issues if
> > -a given guest is tied to a particular PSCI revision (unlikely), or if
> > -a migration causes a different PSCI version to be exposed out of the
> > -blue to an unsuspecting guest.
> > +This means that a guest booted on two different versions of KVM can observe
> > +two different "firmware" revisions. This could cause issues if a given guest
> > +is tied to a particular version of a hypercall service, or if a migration
> > +causes a different version to be exposed out of the blue to an unsuspecting
> > +guest.
> >
> > In order to remedy this situation, KVM exposes a set of "firmware
> > pseudo-registers" that can be manipulated using the GET/SET_ONE_REG
> > interface. These registers can be saved/restored by userspace, and set
> > -to a convenient value if required.
> > +to a convenient value as required.
> >
> > -The following register is defined:
> > +The following registers are defined:
> >
> > * KVM_REG_ARM_PSCI_VERSION:
> >
> > + KVM implements the PSCI (Power State Coordination Interface)
> > + specification in order to provide services such as CPU on/off, reset
> > + and power-off to the guest.
> > +
> > - Only valid if the vcpu has the KVM_ARM_VCPU_PSCI_0_2 feature set
> > (and thus has already been initialized)
> > - Returns the current PSCI version on GET_ONE_REG (defaulting to the
> > @@ -74,4 +74,63 @@ The following register is defined:
> > KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_REQUIRED:
> > The workaround is always active on this vCPU or it is not needed.
> >
> > -.. [1] https://developer.arm.com/-/media/developer/pdf/ARM_DEN_0070A_Firmware_interfaces_for_mitigating_CVE-2017-5715.pdf
> > +
> > +Bitmap Feature Firmware Registers
> > +---------------------------------
> > +
> > +Contrary to the above registers, the following registers exposes the hypercall
> > +services in the form of a feature-bitmap to the userspace. This bitmap is
> > +translated to the services that are available to the guest. There is a register
> > +defined per service call owner and can be accessed via GET/SET_ONE_REG interface.
> > +
> > +By default, these registers are set with the upper limit of the features that
> > +are supported. This way userspace can discover all the electable hypercall services
> > +via GET_ONE_REG. The user-space can write-back the desired bitmap back via
> > +SET_ONE_REG. The features for the registers that are untouched, probably because
> > +userspace isn't aware of them, will be exposed as is to the guest.
> > +
> > +Note that KVM would't allow the userspace to configure the registers anymore once
> > +any of the vCPUs has run at least once. Instead, it will return a -EBUSY. However,
> > +if there's no change in the incoming value, it simply returns a success.
> > +
>
> It would be better to replace "a success" with "zero", to be consistent
> with "-EBUSY". The suggestion may be invalid if the code needs changes
> based on Marc's suggestions.
>
Yes, I agree. Mentioning 'zero' makes more sense. However, I would be
scraping off this logic and return -EBUSY for all the writes after the
VM has started.

> > +The psuedo-firmware bitmap register are as follows:
> > +
> > +* KVM_REG_ARM_STD_BMAP:
> > + Controls the bitmap of the ARM Standard Secure Service Calls.
> > +
> > + The following bits are accepted:
> > +
> > + Bit-0: KVM_REG_ARM_STD_BIT_TRNG_V1_0:
> > + The bit represents the services offered under v1.0 of ARM True Random
> > + Number Generator (TRNG) specification, ARM DEN0098.
> > +
> > +* KVM_REG_ARM_STD_HYP_BMAP:
> > + Controls the bitmap of the ARM Standard Hypervisor Service Calls.
> > +
> > + The following bits are accepted:
> > +
> > + Bit-0: KVM_REG_ARM_STD_HYP_BIT_PV_TIME:
> > + The bit represents the Paravirtualized Time service as represented by
> > + ARM DEN0057A.
> > +
> > +* KVM_REG_ARM_VENDOR_HYP_BMAP:
> > + Controls the bitmap of the Vendor specific Hypervisor Service Calls.
> > +
> > + The following bits are accepted:
> > +
> > + Bit-0: KVM_REG_ARM_VENDOR_HYP_BIT_FUNC_FEAT
> > + The bit represents the ARM_SMCCC_VENDOR_HYP_KVM_FEATURES_FUNC_ID
> > + function-id
> > +
> > + Bit-1: KVM_REG_ARM_VENDOR_HYP_BIT_PTP:
> > + The bit represents the Precision Time Protocol KVM service.
> > +
> > +Errors:
> > +
> > + ======= =============================================================
> > + -ENOENT Unknown register accessed.
> > + -EBUSY Attempt a 'write' to the register after the VM has started.
> > + -EINVAL Invalid bitmap written to the register.
> > + ======= =============================================================
> > +
> > +.. [1] https://developer.arm.com/-/media/developer/pdf/ARM_DEN_0070A_Firmware_interfaces_for_mitigating_CVE-2017-5715.pdf
> > \ No newline at end of file
> >
>
> Thanks,
> Gavin
>
Regards,
Raghavendra