Re: [PATCH 1/2] ath10k: search for default BDF name provided in DT

From: Kalle Valo
Date: Tue Apr 12 2022 - 07:58:29 EST


Abhishek Kumar <kuabhs@xxxxxxxxxxxx> writes:

> Hi All,
>
> Apologies for the late reply, too many things at the same time.

Trust me, I know the feeling :)

> Just a quick note, Qcomm provided a new BDF file with support for
> 'bus=snoc,qmi-board-id=ff' as well, so even without this patch, the
> non-programmed devices(with board-id=0xff) would work. However, for
> optimization of the BDF search strategy, the above mentioned strategy
> would still not work: - The stripping of full Board name would not
> work if board-id itself is not programmed i.e. =0xff e.g. for
> 'bus=snoc,qmi-board-id=ff,qmi-chip-id=320,variant=GO_LAZOR' => no
> match 'bus=snoc,qmi-board-id=ff,qmi-chip-id=320' => no match
> 'bus=snoc,qmi-board-id=ff' => no match 'bus=snoc' => no match because
> all the BDFs contains board-id=67

Sorry, not fully following your here. Are you saying that the problem is
that WCN3990/hw1.0/board-2.bin is missing board file for 'bus=snoc'?
That's easy to add, each board file within board-2.bin has multiple
names so we can easily select one board file for which we add
'bus=snoc'.

> So with this DT patch specifically for case 'bus=snoc,qmi-board-id=ff'
> => no match, we fallback to default case ( the one provided in DT)
> i.e. 'bus=snoc,qmi-board-id=67' => match . I do not see how exactly
> the driver can know that it should check for a board-id of 67.

Sorry, not following you here either. Why would the driver need to use
board-id 67?

> However, to still remove dependency on the DT, we can make the
> board-id as no-op if it is not programmed i.e. if the board-id=ff then
> we would pick any BDF that match 'bus=snoc,qmi-board-id=<XX>' where XX
> can be any arbitrary number. Thoughts ?

To me using just 'bus=snoc' is more logical than picking up an arbitrary
number. But I might be missing something here.

--
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches