[PATCH 1/3] dt-bindings: input: Add bindings for Awinic AW8695 haptics

From: Luca Weiss
Date: Fri Apr 08 2022 - 07:53:42 EST


Add a document describing the bindings for the AW8695 LRA Haptic Driver.

Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
---
.../bindings/input/awinic,aw8695-haptics.yaml | 133 ++++++++++++++++++
1 file changed, 133 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/awinic,aw8695-haptics.yaml

diff --git a/Documentation/devicetree/bindings/input/awinic,aw8695-haptics.yaml b/Documentation/devicetree/bindings/input/awinic,aw8695-haptics.yaml
new file mode 100644
index 000000000000..9f573daaba0e
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/awinic,aw8695-haptics.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/awinic,aw8695-haptics.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Awinic AW8695 LRA Haptic Driver
+
+maintainers:
+ - Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
+
+properties:
+ compatible:
+ const: awinic,aw8695
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+ description: GPIO connected to INTN pin (edge falling)
+
+ reset-gpios:
+ maxItems: 1
+ description: GPIO connected to RSTN pin (active high)
+
+ awinic,f0-preset:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Default value for the f0 of LRA
+
+ awinic,f0-coefficient:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Coefficient between actual f0 and the value in the registers
+
+ awinic,f0-calibration-percent:
+ maxItems: 1
+ description: Limit of f0 deviation from awinic,f0-preset
+
+ awinic,drive-level:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Level of drive waveform in normal driving
+
+ awinic,f0-detection-play-time:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Drive waveform play times in the first period in the f0 detection
+
+ awinic,f0-detection-wait-time:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Waveform wait times in the f0 detection
+
+ awinic,f0-detection-repeat:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Repeat times in the f0 detection
+
+ awinic,f0-detection-trace:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Drive waveform play times in the second period and later in the f0 detection
+
+ awinic,boost-debug:
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ minItems: 3
+ maxItems: 3
+ description: Values for BSTDBG1-3 registers
+
+ awinic,tset:
+ $ref: /schemas/types.yaml#/definitions/uint8
+ description: Value for TSET register
+
+ awinic,r-spare:
+ $ref: /schemas/types.yaml#/definitions/uint8
+ description: Value for R_SPARE register
+
+ awinic,bemf-upper-threshold:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Back EMF (electromotive force) upper threshold
+
+ awinic,bemf-lower-threshold:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Back EMF (electromotive force) lower threshold
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - reset-gpios
+ - awinic,f0-preset
+ - awinic,f0-coefficient
+ - awinic,f0-calibration-percent
+ - awinic,drive-level
+ - awinic,f0-detection-play-time
+ - awinic,f0-detection-wait-time
+ - awinic,f0-detection-repeat
+ - awinic,f0-detection-trace
+ - awinic,boost-debug
+ - awinic,tset
+ - awinic,r-spare
+ - awinic,bemf-upper-threshold
+ - awinic,bemf-lower-threshold
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ haptics@5a {
+ compatible = "awinic,aw8695";
+ reg = <0x5a>;
+ interrupts-extended = <&tlmm 85 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&tlmm 90 GPIO_ACTIVE_HIGH>;
+
+ awinic,f0-preset = <2350>;
+ awinic,f0-coefficient = <260>;
+ awinic,f0-calibration-percent = <7>;
+ awinic,drive-level = <125>;
+
+ awinic,f0-detection-play-time = <5>;
+ awinic,f0-detection-wait-time = <3>;
+ awinic,f0-detection-repeat = <2>;
+ awinic,f0-detection-trace = <15>;
+
+ awinic,boost-debug = /bits/ 8 <0x30 0xeb 0xd4>;
+ awinic,tset = /bits/ 8 <0x12>;
+ awinic,r-spare = /bits/ 8 <0x68>;
+
+ awinic,bemf-upper-threshold = <4104>;
+ awinic,bemf-lower-threshold = <1016>;
+ };
+ };
--
2.35.1