[PATCH AUTOSEL 5.10 18/25] rtc: mc146818-lib: Fix the AltCentury for AMD platforms

From: Sasha Levin
Date: Wed Apr 06 2022 - 21:24:33 EST


From: Mario Limonciello <mario.limonciello@xxxxxxx>

[ Upstream commit 3ae8fd41573af4fb3a490c9ed947fc936ba87190 ]

Setting the century forward has been failing on AMD platforms.
There was a previous attempt at fixing this for family 0x17 as part of
commit 7ad295d5196a ("rtc: Fix the AltCentury value on AMD/Hygon
platform") but this was later reverted due to some problems reported
that appeared to stem from an FW bug on a family 0x17 desktop system.

The same comments mentioned in the previous commit continue to apply
to the newer platforms as well.

```
MC146818 driver use function mc146818_set_time() to set register
RTC_FREQ_SELECT(RTC_REG_A)'s bit4-bit6 field which means divider stage
reset value on Intel platform to 0x7.

While AMD/Hygon RTC_REG_A(0Ah)'s bit4 is defined as DV0 [Reference]:
DV0 = 0 selects Bank 0, DV0 = 1 selects Bank 1. Bit5-bit6 is defined
as reserved.

DV0 is set to 1, it will select Bank 1, which will disable AltCentury
register(0x32) access. As UEFI pass acpi_gbl_FADT.century 0x32
(AltCentury), the CMOS write will be failed on code:
CMOS_WRITE(century, acpi_gbl_FADT.century).

Correct RTC_REG_A bank select bit(DV0) to 0 on AMD/Hygon CPUs, it will
enable AltCentury(0x32) register writing and finally setup century as
expected.
```

However in closer examination the change previously submitted was also
modifying bits 5 & 6 which are declared reserved in the AMD documentation.
So instead modify just the DV0 bank selection bit.

Being cognizant that there was a failure reported before, split the code
change out to a static function that can also be used for exclusions if
any regressions such as Mikhail's pop up again.

Cc: Jinke Fan <fanjinke@xxxxxxxx>
Cc: Mikhail Gavrilov <mikhail.v.gavrilov@xxxxxxxxx>
Link: https://lore.kernel.org/all/CABXGCsMLob0DC25JS8wwAYydnDoHBSoMh2_YLPfqm3TTvDE-Zw@xxxxxxxxxxxxxx/
Link: https://www.amd.com/system/files/TechDocs/51192_Bolton_FCH_RRG.pdf
Signed-off-by: Raul E Rangel <rrangel@xxxxxxxxxxxx>
Signed-off-by: Mario Limonciello <mario.limonciello@xxxxxxx>
Signed-off-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
Link: https://lore.kernel.org/r/20220111225750.1699-1-mario.limonciello@xxxxxxx
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/rtc/rtc-mc146818-lib.c | 16 +++++++++++++++-
include/linux/mc146818rtc.h | 2 ++
2 files changed, 17 insertions(+), 1 deletion(-)

diff --git a/drivers/rtc/rtc-mc146818-lib.c b/drivers/rtc/rtc-mc146818-lib.c
index 5add637c9ad2..b036ff33fbe6 100644
--- a/drivers/rtc/rtc-mc146818-lib.c
+++ b/drivers/rtc/rtc-mc146818-lib.c
@@ -99,6 +99,17 @@ unsigned int mc146818_get_time(struct rtc_time *time)
}
EXPORT_SYMBOL_GPL(mc146818_get_time);

+/* AMD systems don't allow access to AltCentury with DV1 */
+static bool apply_amd_register_a_behavior(void)
+{
+#ifdef CONFIG_X86
+ if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD ||
+ boot_cpu_data.x86_vendor == X86_VENDOR_HYGON)
+ return true;
+#endif
+ return false;
+}
+
/* Set the current date and time in the real time clock. */
int mc146818_set_time(struct rtc_time *time)
{
@@ -172,7 +183,10 @@ int mc146818_set_time(struct rtc_time *time)
save_control = CMOS_READ(RTC_CONTROL);
CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
- CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
+ if (apply_amd_register_a_behavior())
+ CMOS_WRITE((save_freq_select & ~RTC_AMD_BANK_SELECT), RTC_FREQ_SELECT);
+ else
+ CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);

#ifdef CONFIG_MACH_DECSTATION
CMOS_WRITE(real_yrs, RTC_DEC_YEAR);
diff --git a/include/linux/mc146818rtc.h b/include/linux/mc146818rtc.h
index 0661af17a758..1e0205811394 100644
--- a/include/linux/mc146818rtc.h
+++ b/include/linux/mc146818rtc.h
@@ -86,6 +86,8 @@ struct cmos_rtc_board_info {
/* 2 values for divider stage reset, others for "testing purposes only" */
# define RTC_DIV_RESET1 0x60
# define RTC_DIV_RESET2 0x70
+ /* In AMD BKDG bit 5 and 6 are reserved, bit 4 is for select dv0 bank */
+# define RTC_AMD_BANK_SELECT 0x10
/* Periodic intr. / Square wave rate select. 0=none, 1=32.8kHz,... 15=2Hz */
# define RTC_RATE_SELECT 0x0F

--
2.35.1