[RESEND PATCH] arm: dts: at91: Fix boolean properties with values

From: Rob Herring
Date: Wed Apr 06 2022 - 16:52:11 EST


Boolean properties in DT are present or not present and don't take a value.
A property such as 'foo = <0>;' evaluated to true. IOW, the value doesn't
matter.

It may have been intended that 0 values are false, but there is no change
in behavior with this patch.

Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
---
Can someone apply this for 5.18 please.

arch/arm/boot/dts/at91-kizbox3-hs.dts | 2 +-
arch/arm/boot/dts/at91-kizbox3_common.dtsi | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/at91-kizbox3-hs.dts b/arch/arm/boot/dts/at91-kizbox3-hs.dts
index 2799b2a1f4d2..f7d90cf1bb77 100644
--- a/arch/arm/boot/dts/at91-kizbox3-hs.dts
+++ b/arch/arm/boot/dts/at91-kizbox3-hs.dts
@@ -225,7 +225,7 @@ pinctrl_pio_zbe_rst: gpio_zbe_rst {
pinctrl_pio_io_reset: gpio_io_reset {
pinmux = <PIN_PB30__GPIO>;
bias-disable;
- drive-open-drain = <1>;
+ drive-open-drain;
output-low;
};
pinctrl_pio_input: gpio_input {
diff --git a/arch/arm/boot/dts/at91-kizbox3_common.dtsi b/arch/arm/boot/dts/at91-kizbox3_common.dtsi
index abe27adfa4d6..465664628419 100644
--- a/arch/arm/boot/dts/at91-kizbox3_common.dtsi
+++ b/arch/arm/boot/dts/at91-kizbox3_common.dtsi
@@ -211,7 +211,7 @@ pinctrl_flx4_default: flx4_i2c6_default {
pinmux = <PIN_PD12__FLEXCOM4_IO0>, //DATA
<PIN_PD13__FLEXCOM4_IO1>; //CLK
bias-disable;
- drive-open-drain = <1>;
+ drive-open-drain;
};

pinctrl_pwm0 {
--
2.32.0