[PATCH v1] PCI: PM: Power up all devices during runtime resume

From: Rafael J. Wysocki
Date: Wed Apr 06 2022 - 16:42:56 EST


From: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>

Currently, endpoint devices may not be powered up entirely during
runtime resume that follows a D3hot -> D0 transition of the parent
bridge.

Namely, even if the power state of an endpoint device, as indicated
by its PCI_PM_CTRL register, is D0 after powering up its parent
bridge, it may be still necessary to bring its ACPI companion into
D0 and that should be done before accessing it. However, the current
code assumes that reading the PCI_PM_CTRL register is sufficient to
establish the endpoint device's power state, which may lead to
problems.

Address that by forcing a power-up of all PCI devices, including the
platform firmware part of it, during runtime resume.

Link: https://lore.kernel.org/linux-pm/11967527.O9o76ZdvQC@kreacher
Fixes: 5775b843a619 ("PCI: Restore config space on runtime resume despite being unbound")
Reported-by: Abhishek Sahu <abhsahu@xxxxxxxxxx>
Tested-by: Abhishek Sahu <abhsahu@xxxxxxxxxx>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
---
drivers/pci/pci-driver.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

Index: linux-pm/drivers/pci/pci-driver.c
===================================================================
--- linux-pm.orig/drivers/pci/pci-driver.c
+++ linux-pm/drivers/pci/pci-driver.c
@@ -1312,7 +1312,7 @@ static int pci_pm_runtime_resume(struct
* to a driver because although we left it in D0, it may have gone to
* D3cold when the bridge above it runtime suspended.
*/
- pci_restore_standard_config(pci_dev);
+ pci_pm_default_resume_early(pci_dev);

if (!pci_dev->driver)
return 0;