[PATCH V9 1/6] dt-bindings: mfd: pm8008: Add reset-gpios

From: Satya Priya
Date: Tue Apr 05 2022 - 18:40:14 EST


Add reset-gpios property for pm8008.

Signed-off-by: Satya Priya <quic_c_skakit@xxxxxxxxxxx>
---
Changes in V7:
- Removed the intermediate regulators node and added ldos
directly under mfd node.

Changes in V8:
- Change the compatible as per driver, remove interrupts from required
properties, add reset-gpios and move regulators to separate binding.

Changes in V9:
- Undo the changes from V8 and only add reset-gpios. Leave interrupts
as required properties and do not change compatible.

Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
index ec3138c..3312784 100644
--- a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
@@ -44,6 +44,9 @@ properties:
"#size-cells":
const: 0

+ reset-gpios:
+ maxItems: 1
+
patternProperties:
"^gpio@[0-9a-f]+$":
type: object
@@ -92,6 +95,7 @@ required:
- "#address-cells"
- "#size-cells"
- "#interrupt-cells"
+ - reset-gpios

additionalProperties: false

@@ -99,6 +103,7 @@ examples:
- |
#include <dt-bindings/mfd/qcom-pm8008.h>
#include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/gpio/gpio.h>
qupv3_se13_i2c {
#address-cells = <1>;
#size-cells = <0>;
@@ -113,6 +118,8 @@ examples:
interrupt-parent = <&tlmm>;
interrupts = <32 IRQ_TYPE_EDGE_RISING>;

+ reset-gpios = <&pm8350c_gpios 4 GPIO_ACTIVE_HIGH>;
+
pm8008_gpios: gpio@c000 {
compatible = "qcom,pm8008-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
--
2.7.4