Re: [PATCH 1/5] dt-bindings: i2c: Add Qualcomm Geni based QUP i2c bindings

[Kuldeep Singh]

On Sat, Apr 02, 2022 at 02:29:59PM +0200, Krzysztof Kozlowski wrote:
> On 02/04/2022 07:12, Kuldeep Singh wrote:
> > GENI(generic interface) based Qualcomm Universal Peripheral controller
> > can support multiple serial interfaces like spi,uart and i2c.
> > 
> > Unlike other i2c controllers, QUP i2c bindings are present in parent
> > schema. Move it out from parent to an individual binding and let parent
> > refer to child schema later on.
> > 
> > Please note, current schema isn't complete as it misses out few
> > properties and thus, add these missing properties along the process.
> > 
> > Signed-off-by: Kuldeep Singh <singh.kuldeep87k@xxxxxxxxx>
> > ---
> >  .../bindings/i2c/qcom,i2c-geni-qcom.yaml      | 110 ++++++++++++++++++
> >  1 file changed, 110 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
> > new file mode 100644
> > index 000000000000..01a02e680ea3
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
> > @@ -0,0 +1,110 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: "http://devicetree.org/schemas/i2c/qcom,i2c-geni-qcom.yaml#";
> > +$schema: "http://devicetree.org/meta-schemas/core.yaml#";
> > +
> > +title: Qualcomm Geni based QUP I2C Controller
> > +
> > +maintainers:
> > +  - Andy Gross <agross@xxxxxxxxxx>
> > +  - Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> > +
> > +allOf:
> > +  - $ref: /schemas/i2c/i2c-controller.yaml#
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - qcom,geni-i2c
> 
> Just const, no enum. There are no other flavors of this (unless you
> think there are?).

There are no other users. Will change it to const.

> 
> > +
> > +  clocks:
> > +    maxItems: 1
> > +
> > +  clock-names:
> > +    const: se
> > +
> > +  clock-frequency:
> > +    description: Desired I2C bus clock frequency in Hz
> > +    default: 100000
> > +
> > +  interconnects:
> > +    maxItems: 3
> > +
> > +  interconnect-names:
> > +    items:
> > +      - const: qup-core
> > +      - const: qup-config
> > +      - const: qup-memory
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  power-domains:
> > +    maxItems: 1
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  required-opps:
> > +    maxItems: 1
> 
> I have doubts this is correct property. Usually it is part of the
> opp-table. I see sc7180 needs this, but I think it is a mistake. Do you
> know how it is supposed to work?

Not sure how exactly it works. I took reference from
Documentation/devicetree/bindings/clock/qcom,videocc.yaml on how to add
required-opps.

-Kuldeep