[PATCH RESEND] PCI: qcom: fix pipe clock imbalance

[Johan Hovold]

Commit ed8cc3b1fc84 ("PCI: qcom: Add support for SDM845 PCIe
controller") introduced a clock imbalance by enabling the pipe clock
both in init() and in post_init() but only disabling in post_deinit().

Note that the pipe clock was also never disabled in the init() error
paths and that enabling the clock before powering up the PHY looks
questionable.

Fixes: ed8cc3b1fc84 ("PCI: qcom: Add support for SDM845 PCIe controller")
Cc: stable@xxxxxxxxxxxxxxx      # 5.6
Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
---

Resending with lists on CC.

Johan


 drivers/pci/controller/dwc/pcie-qcom.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index b79d98e5e228..20a0e6533a1c 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -1238,12 +1238,6 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
 		goto err_disable_clocks;
 	}
 
-	ret = clk_prepare_enable(res->pipe_clk);
-	if (ret) {
-		dev_err(dev, "cannot prepare/enable pipe clock\n");
-		goto err_disable_clocks;
-	}
-
 	/* Wait for reset to complete, required on SM8450 */
 	usleep_range(1000, 1500);
 
-- 
2.35.1