[PATCH net-next] net: dsa: tag_dsa: Fix tx from VLAN uppers on non-filtering bridges

[Tobias Waldekranz]

In this situation (VLAN filtering disabled on br0):

    br0.10
     /
   br0
   / \
swp0 swp1

When a frame is transmitted from the VLAN upper, the bridge will send
it down to one of the switch ports with forward offloading
enabled. This will cause tag_dsa to generate a FORWARD tag. Before
this change, that tag would have it's VID set to 10, even though VID
10 is not loaded in the VTU.

Before the blamed commit, the frame would trigger a VTU miss and be
forwarded according to the PVT configuration. Now that all fabric
ports are in 802.1Q secure mode, the frame is dropped instead.

Therefore, restrict the condition under which we rewrite an 802.1Q tag
to a DSA tag. On standalone port's, reuse is always safe since we will
always generate FROM_CPU tags in that case. For bridged ports though,
we must ensure that VLAN filtering is enabled, which in turn
guarantees that the VID in question is loaded into the VTU.

Fixes: d352b20f4174 ("net: dsa: mv88e6xxx: Improve multichip isolation of standalone ports")
Signed-off-by: Tobias Waldekranz <tobias@xxxxxxxxxxxxxx>
---
 net/dsa/tag_dsa.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/net/dsa/tag_dsa.c b/net/dsa/tag_dsa.c
index c8b4bbd46191..e4b6e3f2a3db 100644
--- a/net/dsa/tag_dsa.c
+++ b/net/dsa/tag_dsa.c
@@ -127,6 +127,7 @@ static struct sk_buff *dsa_xmit_ll(struct sk_buff *skb, struct net_device *dev,
 				   u8 extra)
 {
 	struct dsa_port *dp = dsa_slave_to_port(dev);
+	struct net_device *br_dev;
 	u8 tag_dev, tag_port;
 	enum dsa_cmd cmd;
 	u8 *dsa_header;
@@ -149,7 +150,16 @@ static struct sk_buff *dsa_xmit_ll(struct sk_buff *skb, struct net_device *dev,
 		tag_port = dp->index;
 	}
 
-	if (skb->protocol == htons(ETH_P_8021Q)) {
+	br_dev = dsa_port_bridge_dev_get(dp);
+
+	/* If frame is already 802.1Q tagged, we can convert it to a DSA
+	 * tag (avoiding a memmove), but only if the port is standalone
+	 * (in which case we always send FROM_CPU) or if the port's
+	 * bridge has VLAN filtering enabled (in which case the CPU port
+	 * will be a member of the VLAN).
+	 */
+	if (skb->protocol == htons(ETH_P_8021Q) &&
+	    (!br_dev || br_vlan_enabled(br_dev))) {
 		if (extra) {
 			skb_push(skb, extra);
 			dsa_alloc_etype_header(skb, extra);
@@ -166,10 +176,9 @@ static struct sk_buff *dsa_xmit_ll(struct sk_buff *skb, struct net_device *dev,
 			dsa_header[2] &= ~0x10;
 		}
 	} else {
-		struct net_device *br = dsa_port_bridge_dev_get(dp);
 		u16 vid;
 
-		vid = br ? MV88E6XXX_VID_BRIDGED : MV88E6XXX_VID_STANDALONE;
+		vid = br_dev ? MV88E6XXX_VID_BRIDGED : MV88E6XXX_VID_STANDALONE;
 
 		skb_push(skb, DSA_HLEN + extra);
 		dsa_alloc_etype_header(skb, DSA_HLEN + extra);
-- 
2.25.1