Re: [PATCH v6 2/9] mfd: smpro-mfd: Adds Ampere's Altra SMpro MFD driver

From: Quan Nguyen
Date: Mon Mar 07 2022 - 03:32:21 EST


Dear Lee Jone,

My apologize as I did not see any of your replys for this series. Maybe due to my bad junk setting,

So this email is to address your comment in https://lkml.org/lkml/2022/2/8/254
Please see my inline below.

Thanks for the review,
- Quan

On 24/12/2021 11:13, Quan Nguyen wrote:
Adds Multi-function devices driver for SMpro co-processor found on the
Mt.Jade hardware reference platform with Ampere's Altra processor family.

Signed-off-by: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
---
Changes in v6:
+ Update license part to reflect that this driver is clone from
simple-mfd-i2c driver [Quan]

Changes in v5:
+ Dropped the use of simple-mfd-i2c driver [Quan]
+ Introduced drivers/mfd/smpro-mfd.c driver to instantiate
sub-devices. This is to avoid DT nodes without resource issue [Quan]
+ Revised commit message [Quan]

Changes in v4:
+ Add "depends on I2C" to fix build issue found by kernel test
robot [Guenter]

Changes in v3:
+ None

Changes in v2:
+ Used 'struct of_device_id's .data attribute [Lee Jones]

drivers/mfd/Kconfig | 12 +++++++
drivers/mfd/Makefile | 1 +
drivers/mfd/smpro-mfd.c | 76 +++++++++++++++++++++++++++++++++++++++++
3 files changed, 89 insertions(+)
create mode 100644 drivers/mfd/smpro-mfd.c

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index a21cbdf89477..a886da5018b1 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -77,6 +77,18 @@ config MFD_AS3711
help
Support for the AS3711 PMIC from AMS
+config MFD_SMPRO
+ tristate "Ampere Computing MFD SMpro core driver"
+ depends on I2C
+ select MFD_CORE
+ select REGMAP_I2C
+ help
+ Say yes here to enable SMpro driver support for Ampere's Altra
+ processor family.
+
+ Ampere's Altra SMpro exposes an I2C regmap interface that can
+ be accessed by child devices.
+
config MFD_AS3722
tristate "ams AS3722 Power Management IC"
select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 4d53e951a92d..fbcd09dce5ce 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -267,6 +267,7 @@ obj-$(CONFIG_MFD_QCOM_PM8008) += qcom-pm8008.o
obj-$(CONFIG_SGI_MFD_IOC3) += ioc3.o
obj-$(CONFIG_MFD_SIMPLE_MFD_I2C) += simple-mfd-i2c.o
+obj-$(CONFIG_MFD_SMPRO) += smpro-mfd.o
obj-$(CONFIG_MFD_INTEL_M10_BMC) += intel-m10-bmc.o
obj-$(CONFIG_MFD_ATC260X) += atc260x-core.o
diff --git a/drivers/mfd/smpro-mfd.c b/drivers/mfd/smpro-mfd.c
new file mode 100644
index 000000000000..132d4e2dde12
--- /dev/null
+++ b/drivers/mfd/smpro-mfd.c
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Ampere Altra Family SMPro MFD - I2C
+ *
+ * Copyright (c) 2021, Ampere Computing LLC
+ * Author: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxxx>
+ *
+ * Based on simple-mfd-i2c.c:
[Lee Jones] Why aren't you just using this?

Mainly, on this series, is because we need to add empty DT nodes for child drivers to be instantiated which was NAK because DT nodes should be for describe HW specific other than to instantiate drivers.

And, as other reason, in my new version, I found that we will need separate MFD driver so that multiple type of bus access could be handled (by using regmap_bus->read/write()).

+ * Copyright (c) by Michael Walle <michael@xxxxxxxx>
+ */
+
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/mfd/core.h>
+#include <linux/regmap.h>
+
+/* Identification Registers */
+#define MANUFACTURER_ID_REG 0x02
+#define AMPERE_MANUFACTURER_ID 0xCD3A
+
+static const struct regmap_config simple_word_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 16,
+};
+
+static const struct mfd_cell smpro_devs[] = {
+ MFD_CELL_NAME("smpro-hwmon"),
+};
[Lee Jones] What are the other devices?

The other devices are smpro-errmon (to query HW error reported by Altra Family processor) and smpro-misc (to handle other miscellaneous info).

+
+static int smpro_mfd_probe(struct i2c_client *i2c)
+{
+ const struct regmap_config *config;
+ struct regmap *regmap;
+ unsigned int val;
+ int ret;
+
+ config = device_get_match_data(&i2c->dev);
+ if (!config)
+ config = &simple_word_regmap_config;
+
+ regmap = devm_regmap_init_i2c(i2c, config);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ /* Check for valid ID */
+ ret = regmap_read(regmap, MANUFACTURER_ID_REG, &val);
+ if (ret)
+ return ret;
+
+ if (val != AMPERE_MANUFACTURER_ID)
+ return -ENODEV;
+
+ return devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO,
+ smpro_devs, ARRAY_SIZE(smpro_devs), NULL, 0, NULL);
+}
+
+static const struct of_device_id smpro_mfd_of_match[] = {
+ { .compatible = "ampere,smpro", .data = &simple_word_regmap_config },
+ {}
+};
+MODULE_DEVICE_TABLE(of, smpro_mfd_of_match);
+
+static struct i2c_driver smpro_mfd_driver = {
+ .probe_new = smpro_mfd_probe,
+ .driver = {
+ .name = "smpro-mfd-i2c",
+ .of_match_table = smpro_mfd_of_match,
+ },
+};
+module_i2c_driver(smpro_mfd_driver);
+
+MODULE_AUTHOR("Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("SMPRO MFD - I2C driver");
+MODULE_LICENSE("GPL v2");