[RFC 6/7] arm64: dts: imx8mp-evk: Add PCIe support

From: Richard Zhu
Date: Mon Mar 07 2022 - 01:24:01 EST


Add PCIe support on i.MX8MP EVK board.

Signed-off-by: Richard Zhu <hongxing.zhu@xxxxxxx>
---
arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 55 ++++++++++++++++++++
1 file changed, 55 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index 2eb943210678..ed77455a3f73 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -5,6 +5,7 @@

/dts-v1/;

+#include <dt-bindings/phy/phy-imx8-pcie.h>
#include "imx8mp.dtsi"

/ {
@@ -33,6 +34,12 @@ memory@40000000 {
<0x1 0x00000000 0 0xc0000000>;
};

+ pcie0_refclk: pcie0-refclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ };
+
reg_can1_stby: regulator-can1-stby {
compatible = "regulator-fixed";
regulator-name = "can1-stby";
@@ -55,6 +62,17 @@ reg_can2_stby: regulator-can2-stby {
enable-active-high;
};

+ reg_pcie0: regulator-pcie {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie0_reg>;
+ regulator-name = "MPCIE_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
reg_usdhc2_vmmc: regulator-usdhc2 {
compatible = "regulator-fixed";
pinctrl-names = "default";
@@ -297,6 +315,30 @@ pca6416: gpio@20 {
};
};

+&pcie_phy {
+ fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+ clocks = <&pcie0_refclk>;
+ clock-names = "ref";
+ status = "okay";
+};
+
+&pcie{
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie0>;
+ reset-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>;
+ clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
+ <&clk IMX8MP_CLK_PCIE_ROOT>,
+ <&clk IMX8MP_CLK_HSIO_AXI>;
+ clock-names = "pcie", "pcie_aux", "pcie_bus";
+ assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
+ <&clk IMX8MP_CLK_PCIE_AUX>;
+ assigned-clock-rates = <500000000>, <10000000>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>,
+ <&clk IMX8MP_SYS_PLL2_50M>;
+ vpcie-supply = <&reg_pcie0>;
+ status = "okay";
+};
+
&snvs_pwrkey {
status = "okay";
};
@@ -442,6 +484,19 @@ MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c3
>;
};

+ pinctrl_pcie0: pcie0grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B 0x61 /* open drain, pull up */
+ MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07 0x41
+ >;
+ };
+
+ pinctrl_pcie0_reg: pcie0reggrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06 0x41
+ >;
+ };
+
pinctrl_pmic: pmicgrp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x000001c0
--
2.25.1