Re: [PATCH v7 2/2] hwmon: Add driver for Texas Instruments TMP464 and TMP468

[Agathe Porte]

Le 3/3/2022 à 4:00 PM, Guenter Roeck a écrit :
> On 3/3/22 00:57, Agathe Porte wrote:
> > Hi Guenter,
> >
> > Le 02/03/2022 à 18:59, Guenter Roeck a écrit :
> > > Any review / test feedback on this patch ? I would like to apply it
> > > before the commit window opens, but the time is getting short.
> >
> > I thought that you did receive the TMP464 samples and had the 
> > opportunity to test on it. I will test v7 on our hardware equipped 
> > with TMP464, verify that DT support works fine, and will reply to 
> > this email with my findings.
>
> Yes, I did, and thanks a lot for it! I even wrote a qemu emulation
> for the chip to be able to test the devicetree code.

Great!

> Still, I need to have someone else confirm that I didn't mess up.

I tested v7 on our hardware and the behavior seems to be the same as our 
previous, in-house driver, if that gives you a point of comparison. We 
only use temp*_input sysfs though.

No compilation warnings.

I can disable and enable sensors fine at runtime:

> # cat temp*_input
> 43063
> 35813
> 34938
> 39313
> 29125
> # echo 0 | tee temp*_enable
> 0
> # cat temp*_input
> cat: temp1_input: No data available
> cat: temp2_input: No data available
> cat: temp3_input: No data available
> cat: temp4_input: No data available
> cat: temp5_input: No data available
> # echo 1 | tee temp*_enable
> 1
> # cat temp*_input
> 43063
> 35750
> 34875
> 39313
> 29188

For what it's worth:

Tested-by: Agathe Porte <agathe.porte@xxxxxxxxx>

Bests.