Re: [PATCH v4 0/4] MIPS: Modify mem= and memmap= parameter

From: Mike Rapoport
Date: Wed Mar 02 2022 - 03:03:37 EST


On Wed, Mar 02, 2022 at 09:50:49AM +0800, Tiezhu Yang wrote:
>
>
> On 03/01/2022 10:31 PM, Mike Rapoport wrote:
> > On Tue, Mar 01, 2022 at 07:51:23PM +0800, Tiezhu Yang wrote:
> > >
> > >
> > > On 03/01/2022 05:55 PM, Mike Rapoport wrote:
> > > > Hi,
> > > >
> > > > On Tue, Mar 01, 2022 at 12:28:57PM +0800, Tiezhu Yang wrote:
> > > > > In the current code, the kernel command-line parameter mem= and memmap=
> > > > > can not work well on MIPS, this patchset refactors the related code to
> > > > > fix them.
> > > > >
> > > > > For kdump on MIPS, if the users want to limit the memory region for the
> > > > > capture kernel to avoid corrupting the memory image of the panic kernel,
> > > > > use the parameter memmap=limit@base is the proper way, I will submit a
> > > > > patch to use memmap=limit@base for kexec-tools after this patchset is
> > > > > applied.
> > > >
> > > > Sorry, apparently I misread the prevoius version.
> > > > What's wrong with the current implementation of mem=limit@base for the
> > > > kdump case?
> > >
> > > In the current code, without this patchset, kernel boot hangs when add
> > > mem=3G, mem=3G@64M or memmap=3G@64M to the command-line, it means that
> > > the parameter mem= and memmap= have bug on mips.
> >
> > I can see how mem=3G may be wrong when the memory does not start at 0, but
> > it seems to do the right thing of mem=3G@64M.
> >
> > Do you see system hangs with mem=3G@64M?
>
> Yes.
>
> >
> > Do you have the logs before the hang?
>
> Here are the logs:
>
> [ 0.000000] Linux version 5.17.0-rc3+ (loongson@linux) (gcc (GCC) 7.3.1
> 20180303 (Red Hat 7.3.1-6), GNU ld version 2.28-13.fc21.loongson.6) #1 SMP
> PREEMPT Wed Mar 2 09:07:39 CST 2022
> [ 0.000000] CpuClock = 1800000000
> [ 0.000000] The bridge chip is LS7A
> [ 0.000000] CP0_Config3: CP0 16.3 (0xdc8030a0)
> [ 0.000000] CP0_PageGrain: CP0 5.1 (0x28000000)
> [ 0.000000] NUMA: Discovered 4 cpus on 1 nodes
> [ 0.000000] Node0: mem_type:1, mem_start:0x200000, mem_size:0xee MB
> [ 0.000000] start_pfn:0x80, end_pfn:0x3c00, num_physpages:0x3b80
> [ 0.000000] Node0: mem_type:2, mem_start:0x90200000, mem_size:0x6fe MB
> [ 0.000000] start_pfn:0x24080, end_pfn:0x40000,
> num_physpages:0x1fb00
> [ 0.000000] Node0: mem_type:2, mem_start:0x120000000, mem_size:0x1600 MB
> [ 0.000000] start_pfn:0x48000, end_pfn:0xa0000,
> num_physpages:0x77b00
> [ 0.000000] Node0's addrspace_offset is 0x0
> [ 0.000000] Node0: start_pfn=0x80, end_pfn=0xa0000
> [ 0.000000] NUMA: set cpumask cpu 0 on node 0
> [ 0.000000] NUMA: set cpumask cpu 1 on node 0
> [ 0.000000] NUMA: set cpumask cpu 2 on node 0
> [ 0.000000] NUMA: set cpumask cpu 3 on node 0
> [ 0.000000] printk: bootconsole [early0] enabled
> [ 0.000000] CPU0 revision is: 0014c001 (ICT Loongson-3)
> [ 0.000000] FPU revision is: 00f70501
> [ 0.000000] MSA revision is: 00060140
> [ 0.000000] OF: fdt: No chosen node found, continuing without
> [ 0.000000] MIPS: machine is loongson,loongson64g-4core-ls7a
> [ 0.000000] User-defined physical RAM map overwrite
> [ 0.000000] Kernel sections are not in the memory maps
> [ 0.000000] Initrd not found or empty - disabling initrd

Can you please also send the log with "memblock=debug" added to the kernel
command line?

> > As for memmap= option, it does not specify the memory map but rather alters
> > the memory map passed by the firmware. Particularity in MIPS implementation
> > it allows to add a single range of available or reserved memory.
> >
> > AFAIU, for the kdump use-case mem=X@Y should suffice.
>
> We can modify some code to make mem=X@Y work well,
> but according to Documentation/admin-guide/kernel-parameters.txt,
> the common way is mem=X and memmap=X@Y, so mem=X@Y for mips seems
> odd, the intention of this patchset is to make mem= and memmap=
> work well and consistent with the other archs.

These options are anyway not consistent on different architectures.
arm, mips and x86 implement mem= one way and arm64, powerpc and riscv in
another so there is no common way to use mem=.

Your changes will break the existing systems that use mem= and memmap=
options because they change the semantics of their MIPS implementation.

For kexec/kdump use-cases modern architectures usually do not pass mem= but
rather prepare the memory map for the kexeced kernel to use. I believe this
would be the right solution.

> Thanks,
> Tiezhu
>
> >
> > > Thanks,
> > > Tiezhu
> > >
> > > >
> > > > > v4: Fix some build warnings reported by kernel test robot
> > > > >
> > > > > v3: Modify patch #3 to maintain compatibility for memmap=limit{$,#,!}base,
> > > > > commented by Mike Rapoport, thank you
> > > > >
> > > > > v2: Add some new patches to support memmap=limit@base
> > > > >
> > > > > Tiezhu Yang (4):
> > > > > MIPS: Refactor early_parse_mem() to fix mem= parameter
> > > > > memblock: Introduce memblock_mem_range_remove_map()
> > > > > MIPS: Refactor early_parse_memmap() to fix memmap= parameter
> > > > > MIPS: Remove not used variable usermem
> > > > >
> > > > > arch/mips/kernel/setup.c | 69 ++++++++++++++++++++++--------------------------
> > > > > include/linux/memblock.h | 1 +
> > > > > mm/memblock.c | 9 +++++--
> > > > > 3 files changed, 40 insertions(+), 39 deletions(-)
> > > > >
> > > > > --
> > > > > 2.1.0
> > > > >
> > > >
> > >
> >
>

--
Sincerely yours,
Mike.