Re: [PATCH v2 2/2] drm/msm/dpu: Issue MDSS reset during initialization

[Dmitry Baryshkov]

On Wed, 2 Mar 2022 at 04:27, Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> wrote:
>
> It's typical for the bootloader to bring up the display for showing a
> boot splash or efi framebuffer. But in some cases the kernel driver ends
> up only partially configuring (in particular) the DPU, which might
> result in e.g. that two different data paths attempts to push data to
> the interface - with resulting graphical artifacts.
>
> Naturally the end goal would be to inherit the bootloader's
> configuration and provide the user with a glitch free handover from the
> boot configuration to a running DPU.
>
> But as implementing seamless transition from the bootloader
> configuration to the running OS will be a considerable effort, start by
> simply resetting the entire MDSS to its power-on state, to avoid the
> partial configuration.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> ---
>
> Changes since v1:
> - Rather than trying to deconfigure individual pieces of the DPU, reset the
>   entire block.
>
>  drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c | 18 ++++++++++++++++++
>  drivers/gpu/drm/msm/msm_drv.c            |  4 ++++
>  drivers/gpu/drm/msm/msm_kms.h            |  1 +
>  3 files changed, 23 insertions(+)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
> index b10ca505f9ac..419eaaefe606 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
> @@ -7,6 +7,7 @@
>  #include <linux/irqchip.h>
>  #include <linux/irqdesc.h>
>  #include <linux/irqchip/chained_irq.h>
> +#include <linux/reset.h>
>  #include "dpu_kms.h"
>
>  #define to_dpu_mdss(x) container_of(x, struct dpu_mdss, base)
> @@ -31,6 +32,7 @@ struct dpu_mdss {
>         void __iomem *mmio;
>         struct clk_bulk_data *clocks;
>         size_t num_clocks;
> +       struct reset_control *reset;
>         struct dpu_irq_controller irq_controller;
>  };
>
> @@ -197,10 +199,18 @@ static void dpu_mdss_destroy(struct msm_mdss *mdss)
>         dpu_mdss->mmio = NULL;
>  }
>
> +static int dpu_mdss_reset(struct msm_mdss *mdss)
> +{
> +       struct dpu_mdss *dpu_mdss = to_dpu_mdss(mdss);
> +
> +       return reset_control_reset(dpu_mdss->reset);
> +}
> +
>  static const struct msm_mdss_funcs mdss_funcs = {
>         .enable = dpu_mdss_enable,
>         .disable = dpu_mdss_disable,
>         .destroy = dpu_mdss_destroy,
> +       .reset = dpu_mdss_reset,
>  };
>
>  int dpu_mdss_init(struct platform_device *pdev)
> @@ -227,6 +237,13 @@ int dpu_mdss_init(struct platform_device *pdev)
>         }
>         dpu_mdss->num_clocks = ret;
>
> +       dpu_mdss->reset = devm_reset_control_get_optional_exclusive(&pdev->dev, NULL);
> +       if (IS_ERR(dpu_mdss->reset)) {
> +               ret = PTR_ERR(dpu_mdss->reset);
> +               DPU_ERROR("failed to acquire mdss reset, ret=%d", ret);
> +               goto reset_parse_err;
> +       }
> +
>         dpu_mdss->base.dev = &pdev->dev;
>         dpu_mdss->base.funcs = &mdss_funcs;
>
> @@ -252,6 +269,7 @@ int dpu_mdss_init(struct platform_device *pdev)
>  irq_error:
>         _dpu_mdss_irq_domain_fini(dpu_mdss);
>  irq_domain_error:
> +reset_parse_err:
>  clk_parse_err:
>         if (dpu_mdss->mmio)
>                 devm_iounmap(&pdev->dev, dpu_mdss->mmio);
> diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c
> index 129fa841ac22..7595f83da3f1 100644
> --- a/drivers/gpu/drm/msm/msm_drv.c
> +++ b/drivers/gpu/drm/msm/msm_drv.c
> @@ -388,6 +388,10 @@ static int msm_drm_init(struct device *dev, const struct drm_driver *drv)
>         if (ret)
>                 return ret;
>
> +       /* Issue a reset of the entire MDSS */
> +       if (priv->mdss && priv->mdss->funcs->reset)
> +               priv->mdss->funcs->reset(priv->mdss);
> +

I think this is incorrect. In this way reset happens after all
subdevice are probed. They might have programmed some state of the
corresponding block. The clocks are already registered, so the clock
framework will be out of sync.
I think the reset should happen before calling of_platform_populate(),
so the device state is consistent with the driver.

Also see the https://git.linaro.org/people/dmitry.baryshkov/kernel.git/log/?h=dpu-mdss-rework,
which reworks the mdss driver and mdss probing.

>         /* Bind all our sub-components: */
>         ret = component_bind_all(dev, ddev);
>         if (ret)
> diff --git a/drivers/gpu/drm/msm/msm_kms.h b/drivers/gpu/drm/msm/msm_kms.h
> index 2a4f0526cb98..716a34fca1cd 100644
> --- a/drivers/gpu/drm/msm/msm_kms.h
> +++ b/drivers/gpu/drm/msm/msm_kms.h
> @@ -205,6 +205,7 @@ struct msm_mdss_funcs {
>         int (*enable)(struct msm_mdss *mdss);
>         int (*disable)(struct msm_mdss *mdss);
>         void (*destroy)(struct msm_mdss *mdss);
> +       int (*reset)(struct msm_mdss *mdss);
>  };
>
>  struct msm_mdss {
> --
> 2.33.1
>


-- 
With best wishes
Dmitry