[PATCH 4/7] clocksource/drivers/timer-microchip-pit64b: use 5MHz for clockevent

From: Claudiu Beznea
Date: Tue Mar 01 2022 - 07:34:08 EST


Use 5MHz clock for clockevent timers. This increases timer's
resolution.

Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
---
drivers/clocksource/timer-microchip-pit64b.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/clocksource/timer-microchip-pit64b.c b/drivers/clocksource/timer-microchip-pit64b.c
index 790d2c9b42a7..abce83d2f00b 100644
--- a/drivers/clocksource/timer-microchip-pit64b.c
+++ b/drivers/clocksource/timer-microchip-pit64b.c
@@ -42,8 +42,7 @@
#define MCHP_PIT64B_LSBMASK GENMASK_ULL(31, 0)
#define MCHP_PIT64B_PRES_TO_MODE(p) (MCHP_PIT64B_MR_PRES & ((p) << 8))
#define MCHP_PIT64B_MODE_TO_PRES(m) ((MCHP_PIT64B_MR_PRES & (m)) >> 8)
-#define MCHP_PIT64B_DEF_CS_FREQ 5000000UL /* 5 MHz */
-#define MCHP_PIT64B_DEF_CE_FREQ 32768 /* 32 KHz */
+#define MCHP_PIT64B_DEF_FREQ 5000000UL /* 5 MHz */

#define MCHP_PIT64B_NAME "pit64b"

@@ -418,7 +417,6 @@ static int __init mchp_pit64b_init_clkevt(struct mchp_pit64b_timer *timer,
static int __init mchp_pit64b_dt_init_timer(struct device_node *node,
bool clkevt)
{
- u32 freq = clkevt ? MCHP_PIT64B_DEF_CE_FREQ : MCHP_PIT64B_DEF_CS_FREQ;
struct mchp_pit64b_timer timer;
unsigned long clk_rate;
u32 irq = 0;
@@ -446,7 +444,7 @@ static int __init mchp_pit64b_dt_init_timer(struct device_node *node,
}

/* Initialize mode (prescaler + SGCK bit). To be used at runtime. */
- ret = mchp_pit64b_init_mode(&timer, freq);
+ ret = mchp_pit64b_init_mode(&timer, MCHP_PIT64B_DEF_FREQ);
if (ret)
goto irq_unmap;

--
2.32.0