[PATCH v2 7/7] arm64: dts: qcom: sa8155: Enable pcie nodes

From: Bhupesh Sharma
Date: Tue Mar 01 2022 - 02:26:29 EST


SA8155p ADP board supports the PCIe0 controller
in the RC mode (only). So add the support for
the same.

Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Cc: Vinod Koul <vkoul@xxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 42 ++++++++++++++++++++++++
1 file changed, 42 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
index 8756c2b25c7e..3f6b3ee404f5 100644
--- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
@@ -387,9 +387,51 @@ &usb_2_qmpphy {
vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
};

+&pcie0 {
+ status = "okay";
+};
+
+&pcie0_phy {
+ status = "okay";
+ vdda-phy-supply = <&vreg_l18c_0p88>;
+ vdda-pll-supply = <&vreg_l8c_1p2>;
+};
+
+&pcie1_phy {
+ vdda-phy-supply = <&vreg_l18c_0p88>;
+ vdda-pll-supply = <&vreg_l8c_1p2>;
+};
+
&tlmm {
gpio-reserved-ranges = <0 4>;

+ bt_en_default: bt_en_default {
+ mux {
+ pins = "gpio172";
+ function = "gpio";
+ };
+
+ config {
+ pins = "gpio172";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ wlan_en_default: wlan_en_default {
+ mux {
+ pins = "gpio169";
+ function = "gpio";
+ };
+
+ config {
+ pins = "gpio169";
+ drive-strength = <16>;
+ output-high;
+ bias-pull-up;
+ };
+ };
+
usb2phy_ac_en1_default: usb2phy_ac_en1_default {
mux {
pins = "gpio113";
--
2.35.1