[PATCH V4 4/6] arm64: dts: qcom: sc7280: Add EUD dt node and dwc3 connector

From: Souradeep Chowdhury
Date: Fri Jan 21 2022 - 08:55:52 EST


Add the Embedded USB Debugger(EUD) device tree node. The
node contains EUD base register region and EUD mode
manager register regions along with the interrupt entry.
Also add the typec connector node for EUD which is attached to
EUD node via port. EUD is also attached to DWC3 node via port.
Also add the role-switch property to dwc3 node.

Signed-off-by: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sc7280.dtsi | 39 ++++++++++++++++++++++++++++++++++++
1 file changed, 39 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 937c2e0..daac831 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -2583,6 +2583,14 @@
phys = <&usb_2_hsphy>;
phy-names = "usb2-phy";
maximum-speed = "high-speed";
+ usb-role-switch;
+ ports {
+ port@0 {
+ usb2_role_switch: endpoint {
+ remote-endpoint = <&eud_ep>;
+ };
+ };
+ };
};
};

@@ -2624,6 +2632,37 @@
interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
};

+ eud: eud@88e0000 {
+ compatible = "qcom,sc7280-eud","qcom,eud";
+ reg = <0 0x88e0000 0 0x2000>,
+ <0 0x88e2000 0 0x1000>;
+ interrupt-parent = <&pdc>;
+ interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+ ports {
+ port@0 {
+ eud_ep: endpoint {
+ remote-endpoint = <&usb2_role_switch>;
+ };
+ };
+ port@1 {
+ eud_con: endpoint {
+ remote-endpoint = <&con_eud>;
+ };
+ };
+ };
+ };
+
+ eud_typec: connector {
+ compatible = "usb-c-connector";
+ ports {
+ port@0 {
+ con_eud: endpoint {
+ remote-endpoint = <&eud_con>;
+ };
+ };
+ };
+ };
+
nsp_noc: interconnect@a0c0000 {
reg = <0 0x0a0c0000 0 0x10000>;
compatible = "qcom,sc7280-nsp-noc";
--
2.7.4