Re: [PATCH v2] net: phy: marvell: Honor phy LED set by system firmware on a Dell hardware

From: Kai-Heng Feng
Date: Thu Jan 20 2022 - 23:01:52 EST


On Thu, Jan 20, 2022 at 10:26 PM Andrew Lunn <andrew@xxxxxxx> wrote:
>
> On Thu, Jan 20, 2022 at 01:19:29PM +0800, Kai-Heng Feng wrote:
> > BIOS on Dell Edge Gateway 3200 already makes its own phy LED setting, so
> > instead of setting another value, keep it untouched and restore the saved
> > value on system resume.
> >
> > Introduce config_led() callback in phy_driver() to make the implemtation
> > generic.
>
> I'm also wondering if we need to take a step back here and get the
> ACPI guys involved. I don't know much about ACPI, but shouldn't it
> provide a control method to configure the PHYs LEDs?
>
> We already have the basics for defining a PHY in ACPI. See:
>
> https://www.kernel.org/doc/html/latest/firmware-guide/acpi/dsd/phy.html

These properties seem to come from device-tree.

>
> so you could extend this to include a method to configure the LEDs for
> a specific PHY.

How to add new properties? Is it required to add new properties to
both DT and ACPI?
Looks like many drivers use _DSD freely, but those properties are not
defined in ACPI spec...

Kai-Heng

>
> Andrew