Re: [PATCH v2] net: phy: marvell: Honor phy LED set by system firmware on a Dell hardware

From: Heiner Kallweit
Date: Thu Jan 20 2022 - 02:58:25 EST


On 20.01.2022 06:19, Kai-Heng Feng wrote:
> BIOS on Dell Edge Gateway 3200 already makes its own phy LED setting, so
> instead of setting another value, keep it untouched and restore the saved
> value on system resume.
>
> Introduce config_led() callback in phy_driver() to make the implemtation
> generic.
>
> Signed-off-by: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
> ---
> v2:
> - Split with a new helper to find default LED config.
> - Make the patch more generic.
>
> drivers/net/phy/marvell.c | 43 +++++++++++++++++++++++++++++-------
> drivers/net/phy/phy_device.c | 21 ++++++++++++++++++
> include/linux/phy.h | 9 ++++++++
> 3 files changed, 65 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
> index 739859c0dfb18..54ee54a6895c9 100644
> --- a/drivers/net/phy/marvell.c
> +++ b/drivers/net/phy/marvell.c
> @@ -746,10 +746,14 @@ static int m88e1510_config_aneg(struct phy_device *phydev)
> return err;
> }
>
> -static void marvell_config_led(struct phy_device *phydev)
> +static int marvell_find_led_config(struct phy_device *phydev)
> {
> - u16 def_config;
> - int err;
> + int def_config;
> +
> + if (phydev->dev_flags & PHY_USE_FIRMWARE_LED) {
> + def_config = phy_read_paged(phydev, MII_MARVELL_LED_PAGE, MII_PHY_LED_CTRL);
> + return def_config < 0 ? -1 : def_config;
> + }
>
> switch (MARVELL_PHY_FAMILY_ID(phydev->phy_id)) {
> /* Default PHY LED config: LED[0] .. Link, LED[1] .. Activity */
> @@ -769,20 +773,30 @@ static void marvell_config_led(struct phy_device *phydev)
> def_config = MII_88E1510_PHY_LED_DEF;
> break;
> default:
> - return;
> + return -1;
> }
>
> + return def_config;
> +}
> +
> +static void marvell_config_led(struct phy_device *phydev, bool resume)
> +{
> + int err;
> +
> + if (!resume)
> + phydev->led_config = marvell_find_led_config(phydev);
> +
> + if (phydev->led_config == -1)
> + return;
> +
> err = phy_write_paged(phydev, MII_MARVELL_LED_PAGE, MII_PHY_LED_CTRL,
> - def_config);
> + phydev->led_config);
> if (err < 0)
> phydev_warn(phydev, "Fail to config marvell phy LED.\n");
> }
>
> static int marvell_config_init(struct phy_device *phydev)
> {
> - /* Set default LED */
> - marvell_config_led(phydev);
> -
> /* Set registers from marvell,reg-init DT property */
> return marvell_of_reg_init(phydev);
> }
> @@ -2845,6 +2859,7 @@ static struct phy_driver marvell_drivers[] = {
> /* PHY_GBIT_FEATURES */
> .probe = marvell_probe,
> .config_init = marvell_config_init,
> + .config_led = marvell_config_led,
> .config_aneg = m88e1101_config_aneg,
> .config_intr = marvell_config_intr,
> .handle_interrupt = marvell_handle_interrupt,
> @@ -2944,6 +2959,7 @@ static struct phy_driver marvell_drivers[] = {
> /* PHY_GBIT_FEATURES */
> .probe = marvell_probe,
> .config_init = marvell_1011gbe_config_init,
> + .config_led = marvell_config_led,
> .config_aneg = m88e1121_config_aneg,
> .read_status = marvell_read_status,
> .config_intr = marvell_config_intr,
> @@ -2965,6 +2981,7 @@ static struct phy_driver marvell_drivers[] = {
> /* PHY_GBIT_FEATURES */
> .probe = marvell_probe,
> .config_init = m88e1318_config_init,
> + .config_led = marvell_config_led,
> .config_aneg = m88e1318_config_aneg,
> .read_status = marvell_read_status,
> .config_intr = marvell_config_intr,
> @@ -3044,6 +3061,7 @@ static struct phy_driver marvell_drivers[] = {
> /* PHY_GBIT_FEATURES */
> .probe = marvell_probe,
> .config_init = m88e1116r_config_init,
> + .config_led = marvell_config_led,
> .config_intr = marvell_config_intr,
> .handle_interrupt = marvell_handle_interrupt,
> .resume = genphy_resume,
> @@ -3065,6 +3083,7 @@ static struct phy_driver marvell_drivers[] = {
> .flags = PHY_POLL_CABLE_TEST,
> .probe = m88e1510_probe,
> .config_init = m88e1510_config_init,
> + .config_led = marvell_config_led,
> .config_aneg = m88e1510_config_aneg,
> .read_status = marvell_read_status,
> .config_intr = marvell_config_intr,
> @@ -3094,6 +3113,7 @@ static struct phy_driver marvell_drivers[] = {
> .flags = PHY_POLL_CABLE_TEST,
> .probe = marvell_probe,
> .config_init = marvell_1011gbe_config_init,
> + .config_led = marvell_config_led,
> .config_aneg = m88e1510_config_aneg,
> .read_status = marvell_read_status,
> .config_intr = marvell_config_intr,
> @@ -3120,6 +3140,7 @@ static struct phy_driver marvell_drivers[] = {
> /* PHY_GBIT_FEATURES */
> .flags = PHY_POLL_CABLE_TEST,
> .config_init = marvell_1011gbe_config_init,
> + .config_led = marvell_config_led,
> .config_aneg = m88e1510_config_aneg,
> .read_status = marvell_read_status,
> .config_intr = marvell_config_intr,
> @@ -3144,6 +3165,7 @@ static struct phy_driver marvell_drivers[] = {
> /* PHY_BASIC_FEATURES */
> .probe = marvell_probe,
> .config_init = m88e3016_config_init,
> + .config_led = marvell_config_led,
> .aneg_done = marvell_aneg_done,
> .read_status = marvell_read_status,
> .config_intr = marvell_config_intr,
> @@ -3165,6 +3187,7 @@ static struct phy_driver marvell_drivers[] = {
> .flags = PHY_POLL_CABLE_TEST,
> .probe = marvell_probe,
> .config_init = marvell_1011gbe_config_init,
> + .config_led = marvell_config_led,
> .config_aneg = m88e6390_config_aneg,
> .read_status = marvell_read_status,
> .config_intr = marvell_config_intr,
> @@ -3191,6 +3214,7 @@ static struct phy_driver marvell_drivers[] = {
> .flags = PHY_POLL_CABLE_TEST,
> .probe = marvell_probe,
> .config_init = marvell_1011gbe_config_init,
> + .config_led = marvell_config_led,
> .config_aneg = m88e6390_config_aneg,
> .read_status = marvell_read_status,
> .config_intr = marvell_config_intr,
> @@ -3217,6 +3241,7 @@ static struct phy_driver marvell_drivers[] = {
> .flags = PHY_POLL_CABLE_TEST,
> .probe = marvell_probe,
> .config_init = marvell_1011gbe_config_init,
> + .config_led = marvell_config_led,
> .config_aneg = m88e1510_config_aneg,
> .read_status = marvell_read_status,
> .config_intr = marvell_config_intr,
> @@ -3242,6 +3267,7 @@ static struct phy_driver marvell_drivers[] = {
> .probe = marvell_probe,
> /* PHY_GBIT_FEATURES */
> .config_init = marvell_1011gbe_config_init,
> + .config_led = marvell_config_led,
> .config_aneg = m88e1510_config_aneg,
> .read_status = marvell_read_status,
> .config_intr = marvell_config_intr,
> @@ -3264,6 +3290,7 @@ static struct phy_driver marvell_drivers[] = {
> .probe = marvell_probe,
> .features = PHY_GBIT_FIBRE_FEATURES,
> .config_init = marvell_1011gbe_config_init,
> + .config_led = marvell_config_led,
> .config_aneg = m88e1510_config_aneg,
> .read_status = marvell_read_status,
> .config_intr = marvell_config_intr,
> diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
> index 74d8e1dc125f8..c9e97206aa9e8 100644
> --- a/drivers/net/phy/phy_device.c
> +++ b/drivers/net/phy/phy_device.c
> @@ -12,6 +12,7 @@
> #include <linux/acpi.h>
> #include <linux/bitmap.h>
> #include <linux/delay.h>
> +#include <linux/dmi.h>
> #include <linux/errno.h>
> #include <linux/etherdevice.h>
> #include <linux/ethtool.h>
> @@ -1157,6 +1158,7 @@ static int phy_poll_reset(struct phy_device *phydev)
> int phy_init_hw(struct phy_device *phydev)
> {
> int ret = 0;
> + bool resume = phydev->suspended;
>
> /* Deassert the reset signal */
> phy_device_reset(phydev, 0);
> @@ -1184,6 +1186,9 @@ int phy_init_hw(struct phy_device *phydev)
> return ret;
> }
>
> + if (phydev->drv->config_led)
> + phydev->drv->config_led(phydev, resume);
> +
> if (phydev->drv->config_intr) {
> ret = phydev->drv->config_intr(phydev);
> if (ret < 0)
> @@ -1342,6 +1347,17 @@ int phy_sfp_probe(struct phy_device *phydev,
> }
> EXPORT_SYMBOL(phy_sfp_probe);
>
> +static const struct dmi_system_id platform_flags[] = {
> + {
> + .matches = {
> + DMI_MATCH(DMI_SYS_VENDOR, "Dell EMC"),
> + DMI_MATCH(DMI_PRODUCT_NAME, "Edge Gateway 3200"),
> + },
> + .driver_data = (void *)PHY_USE_FIRMWARE_LED,
> + },
> + {}
> +};
> +
> /**
> * phy_attach_direct - attach a network device to a given PHY device pointer
> * @dev: network device to attach
> @@ -1363,6 +1379,7 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
> struct mii_bus *bus = phydev->mdio.bus;
> struct device *d = &phydev->mdio.dev;
> struct module *ndev_owner = NULL;
> + const struct dmi_system_id *dmi;
> bool using_genphy = false;
> int err;
>
> @@ -1443,6 +1460,10 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
> phydev_err(phydev, "error creating 'phy_standalone' sysfs entry\n");
> }
>
> + dmi = dmi_first_match(platform_flags);
> + if (dmi)
> + phydev->dev_flags |= (u32)dmi->driver_data;
> +
> phydev->dev_flags |= flags;
>
> phydev->interface = interface;
> diff --git a/include/linux/phy.h b/include/linux/phy.h
> index 6de8d7a90d78e..3a944a6564f43 100644
> --- a/include/linux/phy.h
> +++ b/include/linux/phy.h
> @@ -517,6 +517,8 @@ struct phy_c45_device_ids {
> struct macsec_context;
> struct macsec_ops;
>
> +#define PHY_USE_FIRMWARE_LED 0x1000000
> +
> /**
> * struct phy_device - An instance of a PHY
> *
> @@ -663,6 +665,7 @@ struct phy_device {
>
> struct phy_led_trigger *led_link_trigger;
> #endif
> + int led_config;
>
> /*
> * Interrupt number for this PHY
> @@ -776,6 +779,12 @@ struct phy_driver {
> */
> int (*config_init)(struct phy_device *phydev);
>
> + /**
> + * @config_led: Called to config the PHY LED,
> + * Use the resume flag to indicate init or resume
> + */
> + void (*config_led)(struct phy_device *phydev, bool resume);
> +
> /**
> * @probe: Called during discovery. Used to set
> * up device-specific structures, if any

All this looks quite hacky to me. Why do we touch the LED config at all
in the PHY driver? The current code deals with the LED Function Control
register only, for the LED Polarity Control and LED Timer Control we
rely on the boot loader anyway.
I see that previous LED-related changes like a93f7fe13454 ("net: phy:
marvell: add new default led configure for m88e151x") were committed
w/o involvement of the PHY maintainers.
Flags like MARVELL_PHY_LED0_LINK_LED1_ACTIVE I see as a workaround
because the feature as such isn't Marvell-specific. Most PHY's provide
means to configure whether LED pins are triggered by selected link speeds
and/or rx/tx activity.

Unfortunately the discussion with the LED subsystem maintainers about
how to deal best with MAC/PHY-controlled LEDs (and hw triggers in general)
didn't result in anything tangible yet. Latest attempt I'm aware of:
https://lore.kernel.org/linux-leds/20211112153557.26941-1-ansuelsmth@xxxxxxxxx/T/#t