Re: [PATCH v4 3/3] mmc: mediatek: add support for SDIO eint IRQ

From: Andy Shevchenko
Date: Wed Jan 19 2022 - 14:49:22 EST


On Wed, Jan 19, 2022 at 06:32:12PM +0800, Axe Yang wrote:
> Add support for eint IRQ when MSDC is used as an SDIO host. This
> feature requires SDIO device support async IRQ function. With this
> feature, SDIO host can be awakened by SDIO card in suspend state,
> without additional pin.
>
> MSDC driver will time-share the SDIO DAT1 pin. During suspend, MSDC
> turn off clock and switch SDIO DAT1 pin to GPIO mode. And during
> resume, switch GPIO function back to DAT1 mode then turn on clock.
>
> Some device tree property should be added or modified in MSDC node
> to support SDIO eint IRQ. Pinctrls named state_dat1 and state_eint
> are mandatory. And cap-sdio-async-irq flag is necessary since this
> feature depends on asynchronous interrupt:
> &mmcX {
> ...
> pinctrl-names = "default", "state_uhs", "state_eint",
> "state_dat1";
> ...
> pinctrl-2 = <&mmc2_pins_eint>;
> pinctrl-3 = <&mmc2_pins_dat1>;
> ...
> cap-sdio-async-irq;
> ...
> };
>
> Signed-off-by: Axe Yang <axe.yang@xxxxxxxxxxxx>

The submitters SoB must be last among all SoB tags. Please, read Submitting
Patches document carefully.

> Signed-off-by: Yong Mao <yong.mao@xxxxxxxxxxxx>

Who is they, why their SoB appeared here?

...

> /*
> - * Copyright (c) 2014-2015 MediaTek Inc.
> + * Copyright (c) 2022 MediaTek Inc.

This doesn't feel right. Why did you remove old years?

> * Author: Chaotian.Jing <chaotian.jing@xxxxxxxxxxxx>
> */

...

> + desc = devm_gpiod_get(host->dev, "eint", GPIOD_IN);
> + if (IS_ERR(desc))
> + return PTR_ERR(desc);

> + ret = gpiod_to_irq(desc);
> + if (ret < 0)
> + return ret;
> +
> + irq = ret;

Since both of them are local variables and there is no specific use of the
returned value, I believe it's fine just to

irq = gpiod_to_irq(desc);
...

Hmm... I was wondering if you can use fwnode_irq_get_byname().
Ah, it's not (yet) in upstream.

...

> static int __maybe_unused msdc_runtime_suspend(struct device *dev)
> {
> + unsigned long flags;

Can you keep reversed xmas tree order?

> struct mmc_host *mmc = dev_get_drvdata(dev);
> struct msdc_host *host = mmc_priv(mmc);

(it means to add new variable here)

> return 0;
> }

...

> static int __maybe_unused msdc_runtime_resume(struct device *dev)
> {
> + unsigned long flags;

Ditto.

> struct mmc_host *mmc = dev_get_drvdata(dev);
> struct msdc_host *host = mmc_priv(mmc);
> int ret;

> return 0;
> }

--
With Best Regards,
Andy Shevchenko