Re: [PATCH V6 3/5] tty: serial: meson: Describes the calculation of the UART baud rate clock using a clock frame

[Jiri Slaby]

On 18. 01. 22, 4:09, Yu Tu wrote:
> Using the common Clock code to describe the UART baud rate clock
> makes it easier for the UART driver to be compatible with the
> baud rate requirements of the UART IP on different meson chips.
...
> --- a/drivers/tty/serial/meson_uart.c
> +++ b/drivers/tty/serial/meson_uart.c
...
> @@ -629,57 +640,105 @@ static struct uart_driver meson_uart_driver = {
>   	.cons		= MESON_SERIAL_CONSOLE,
>   };
>   
> -static inline struct clk *meson_uart_probe_clock(struct device *dev,
> -						 const char *id)
> -{
> -	struct clk *clk = NULL;
> -	int ret;
> -
> -	clk = devm_clk_get(dev, id);
> -	if (IS_ERR(clk))
> -		return clk;
> -
> -	ret = clk_prepare_enable(clk);
> -	if (ret) {
> -		dev_err(dev, "couldn't enable clk\n");
> -		return ERR_PTR(ret);
> -	}
> -
> -	devm_add_action_or_reset(dev,
> -			(void(*)(void *))clk_disable_unprepare,
> -			clk);
> -
> -	return clk;
> -}
> +static struct clk_div_table xtal_div_table[] = {

This can be const, right?

> +	{0, 3},
> +	{1, 1},
> +	{2, 2},
> +	{3, 2},

Not sure if you didn't remove too much whitespace. I think it should be 
like: "{ 0, 3 },". But I actually don't care, it's a minor thing.

I cannot comment on the rest (clk and OF part) as my knowledge is pretty 
limited there. Leaving up to others.

thanks,
--
js
suse labs