[PATCH 3/3] dt-bindings: display: msm: Add binding for msm8998 dpu

From: Jami Kettunen
Date: Thu Jan 13 2022 - 10:04:56 EST


From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxxx>

Add yaml binding for msm8998 dpu1 support.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxxx>
Signed-off-by: Jami Kettunen <jami.kettunen@xxxxxxxxxxxxxx>
---
.../bindings/display/msm/dpu-msm8998.yaml | 219 ++++++++++++++++++
1 file changed, 219 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml

diff --git a/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml b/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml
new file mode 100644
index 000000000000..167bc48748d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml
@@ -0,0 +1,219 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dpu-msm8998.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU dt properties for MSM8998 target
+
+maintainers:
+ - AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxxx>
+
+description: |
+ Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+ sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+ bindings of MDSS and DPU are mentioned for MSM8998 target.
+
+properties:
+ compatible:
+ items:
+ - const: qcom,msm8998-mdss
+
+ reg:
+ maxItems: 1
+
+ reg-names:
+ const: mdss
+
+ power-domains:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Display AHB clock
+ - description: Display AXI clock
+ - description: Display core clock
+
+ clock-names:
+ items:
+ - const: iface
+ - const: bus
+ - const: core
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ "#address-cells": true
+
+ "#size-cells": true
+
+ "#interrupt-cells":
+ const: 1
+
+ iommus:
+ items:
+ - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0
+
+ ranges: true
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ description: Node containing the properties of DPU.
+
+ properties:
+ compatible:
+ items:
+ - const: qcom,msm8998-dpu
+
+ reg:
+ items:
+ - description: Address offset and size for mdp register set
+ - description: Address offset and size for regdma register set
+ - description: Address offset and size for vbif register set
+ - description: Address offset and size for non-realtime vbif register set
+
+ reg-names:
+ items:
+ - const: mdp
+ - const: regdma
+ - const: vbif
+ - const: vbif_nrt
+
+ clocks:
+ items:
+ - description: Display ahb clock
+ - description: Display axi clock
+ - description: Display mem-noc clock
+ - description: Display core clock
+ - description: Display vsync clock
+
+ clock-names:
+ items:
+ - const: iface
+ - const: bus
+ - const: mnoc
+ - const: core
+ - const: vsync
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ operating-points-v2: true
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description: |
+ Contains the list of output ports from DPU device. These ports
+ connect to interfaces that are external to the DPU hardware,
+ such as DSI, DP etc. Each output port contains an endpoint that
+ describes how it is connected to an external interface.
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: DPU_INTF1 (DSI1)
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: DPU_INTF2 (DSI2)
+
+ required:
+ - port@0
+ - port@1
+
+ required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - interrupts
+ - power-domains
+ - operating-points-v2
+ - ports
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - power-domains
+ - clocks
+ - interrupts
+ - interrupt-controller
+ - iommus
+ - ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,mmcc-msm8998.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-subsystem@c900000 {
+ compatible = "qcom,msm8998-mdss";
+ reg = <0x0c900000 0x1000>;
+ reg-names = "mdss";
+
+ clocks = <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_AXI_CLK>,
+ <&mmcc MDSS_MDP_CLK>;
+ clock-names = "iface", "bus", "core";
+
+ #address-cells = <1>;
+ #interrupt-cells = <1>;
+ #size-cells = <1>;
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ iommus = <&mmss_smmu 0>;
+
+ power-domains = <&mmcc MDSS_GDSC>;
+ ranges;
+
+ display-controller@c901000 {
+ compatible = "qcom,msm8998-dpu";
+ reg = <0x0c901000 0x8f000>,
+ <0x0c9a8e00 0xf0>,
+ <0x0c9b0000 0x2008>,
+ <0x0c9b8000 0x1040>;
+ reg-names = "mdp", "regdma", "vbif", "vbif_nrt";
+
+ clocks = <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_AXI_CLK>,
+ <&mmcc MNOC_AHB_CLK>,
+ <&mmcc MDSS_MDP_CLK>,
+ <&mmcc MDSS_VSYNC_CLK>;
+ clock-names = "iface", "bus", "mnoc", "core", "vsync";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmpd MSM8998_VDDMX>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dpu_intf2_out: endpoint {
+ remote-endpoint = <&dsi1_in>;
+ };
+ };
+ };
+ };
+ };
+...
--
2.34.1