Re: [PATCH 2/2] ASoC: dt-bindings: add bindings for TI TAS5805M.

From: Daniel Beer
Date: Tue Jan 11 2022 - 13:47:07 EST


On Tue, Jan 11, 2022 at 05:26:14PM +0000, Mark Brown wrote:
> On Tue, Jan 11, 2022 at 01:00:09PM +1300, Daniel Beer wrote:
>
> > + ti,dsp-config: |
> > + description: |
> > + A byte sequence giving DSP configuration. Each pair of bytes, in
> > + sequence, gives a register address and a value to write. If you
> > + are taking this data from TI's PPC3 tool, this should contain only
> > + the register writes following the 5ms delay.
>
> This doesn't look appropriate for DT, it looks more like it should be
> loaded as firmware since systems might want to support multiple
> configurations at runtime based on use casea. It would also be good to
> have code to validate that any supplied coefficeints/firmware don't
> overwrite registers managed by the driver, just in case.

Hi Mark,

That was my initial thought, but the problem is that different instances
may have different configurations.

We don't really have a way of validating the configuration here, since
it's typically generated by TI's PPC3 tool.

If you think it's still inappropriate to supply the configuration in the
device-tree, do you have any suggestions?

Cheers,
Daniel

--
Daniel Beer
Firmware Engineer at Igor Institute
daniel.beer@xxxxxxxxxxxxxxxxx or +64-27-420-8101
Offices in Seattle, San Francisco, and Vancouver BC or (206) 494-3312