Re: [PATCH v3 12/23] media: atmel: atmel-isc: implement media controller

From: Jacopo Mondi
Date: Tue Jan 11 2022 - 11:50:40 EST


On Tue, Jan 11, 2022 at 04:30:15PM +0000, Eugen.Hristev@xxxxxxxxxxxxx wrote:
> On 1/11/22 6:06 PM, Jacopo Mondi wrote:
> > Hi Eugen,
> >
> > On Mon, Dec 13, 2021 at 03:49:29PM +0200, Eugen Hristev wrote:
> >> Implement the support for media-controller.
> >> This means that the capabilities of the driver have changed and now
> >> it also advertises the IO_MC .
> >> The driver will register it's media device, and add the video entity to this
> >> media device. The subdevices are registered to the same media device.
> >> The ISC will have a base entity which is auto-detected as atmel_isc_base.
> >> It will also register a subdevice that allows cropping of the incoming frame
> >> to the maximum frame size supported by the ISC.
> >> The ISC will create a link between the subdevice that is asynchronously
> >> registered and the atmel_isc_scaler entity.
> >> Then, the atmel_isc_scaler and atmel_isc_base are connected through another
> >> link.
> >>
> >> Signed-off-by: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
> >> ---
> >> Changes in v2:
> >> - implement try formats
> >>
> >> drivers/media/platform/atmel/Makefile | 2 +-
> >> drivers/media/platform/atmel/atmel-isc-base.c | 27 +-
> >> drivers/media/platform/atmel/atmel-isc-mc.c | 287 ++++++++++++++++++
> >> drivers/media/platform/atmel/atmel-isc.h | 36 +++
> >> .../media/platform/atmel/atmel-sama5d2-isc.c | 14 +-
> >> .../media/platform/atmel/atmel-sama7g5-isc.c | 12 +-
> >> 6 files changed, 370 insertions(+), 8 deletions(-)
> >> create mode 100644 drivers/media/platform/atmel/atmel-isc-mc.c
> >>
> >> diff --git a/drivers/media/platform/atmel/Makefile b/drivers/media/platform/atmel/Makefile
> >> index 794e8f739287..aa7a18b428f6 100644
> >> --- a/drivers/media/platform/atmel/Makefile
> >> +++ b/drivers/media/platform/atmel/Makefile
> >> @@ -1,7 +1,7 @@
> >> # SPDX-License-Identifier: GPL-2.0-only
> >> atmel-isc-objs = atmel-sama5d2-isc.o
> >> atmel-xisc-objs = atmel-sama7g5-isc.o
> >> -atmel-isc-common-objs = atmel-isc-base.o atmel-isc-clk.o
> >> +atmel-isc-common-objs = atmel-isc-base.o atmel-isc-clk.o atmel-isc-mc.o
> >>
> >> obj-$(CONFIG_VIDEO_ATMEL_ISI) += atmel-isi.o
> >> obj-$(CONFIG_VIDEO_ATMEL_ISC_BASE) += atmel-isc-common.o
> >> diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
> >> index d0542b97a391..b0c3ed21f372 100644
> >> --- a/drivers/media/platform/atmel/atmel-isc-base.c
> >> +++ b/drivers/media/platform/atmel/atmel-isc-base.c
> >> @@ -1726,6 +1726,7 @@ static int isc_async_bound(struct v4l2_async_notifier *notifier,
> >> struct isc_device, v4l2_dev);
> >> struct isc_subdev_entity *subdev_entity =
> >> container_of(notifier, struct isc_subdev_entity, notifier);
> >> + int pad;
> >>
> >> if (video_is_registered(&isc->video_dev)) {
> >> v4l2_err(&isc->v4l2_dev, "only supports one sub-device.\n");
> >> @@ -1734,6 +1735,16 @@ static int isc_async_bound(struct v4l2_async_notifier *notifier,
> >>
> >> subdev_entity->sd = subdev;
> >>
> >> + pad = media_entity_get_fwnode_pad(&subdev->entity, asd->match.fwnode,
> >> + MEDIA_PAD_FL_SOURCE);
> >> + if (pad < 0) {
> >> + v4l2_err(&isc->v4l2_dev, "failed to find pad for %s\n",
> >> + subdev->name);
> >> + return pad;
> >> + }
> >> +
> >> + isc->remote_pad = pad;
> >> +
> >> return 0;
> >> }
> >>
> >> @@ -1748,8 +1759,8 @@ static void isc_async_unbind(struct v4l2_async_notifier *notifier,
> >> v4l2_ctrl_handler_free(&isc->ctrls.handler);
> >> }
> >>
> >> -static struct isc_format *find_format_by_code(struct isc_device *isc,
> >> - unsigned int code, int *index)
> >> +struct isc_format *isc_find_format_by_code(struct isc_device *isc,
> >> + unsigned int code, int *index)
> >> {
> >> struct isc_format *fmt = &isc->formats_list[0];
> >> unsigned int i;
> >> @@ -1765,6 +1776,7 @@ static struct isc_format *find_format_by_code(struct isc_device *isc,
> >>
> >> return NULL;
> >> }
> >> +EXPORT_SYMBOL_GPL(isc_find_format_by_code);
> >>
> >> static int isc_formats_init(struct isc_device *isc)
> >> {
> >> @@ -1781,7 +1793,7 @@ static int isc_formats_init(struct isc_device *isc)
> >> NULL, &mbus_code)) {
> >> mbus_code.index++;
> >>
> >> - fmt = find_format_by_code(isc, mbus_code.code, &i);
> >> + fmt = isc_find_format_by_code(isc, mbus_code.code, &i);
> >> if (!fmt) {
> >> v4l2_warn(&isc->v4l2_dev, "Mbus code %x not supported\n",
> >> mbus_code.code);
> >> @@ -1909,7 +1921,8 @@ static int isc_async_complete(struct v4l2_async_notifier *notifier)
> >> vdev->queue = q;
> >> vdev->lock = &isc->lock;
> >> vdev->ctrl_handler = &isc->ctrls.handler;
> >> - vdev->device_caps = V4L2_CAP_STREAMING | V4L2_CAP_VIDEO_CAPTURE;
> >> + vdev->device_caps = V4L2_CAP_STREAMING | V4L2_CAP_VIDEO_CAPTURE |
> >> + V4L2_CAP_IO_MC;
> >> video_set_drvdata(vdev, isc);
> >>
> >> ret = video_register_device(vdev, VFL_TYPE_VIDEO, -1);
> >> @@ -1919,8 +1932,14 @@ static int isc_async_complete(struct v4l2_async_notifier *notifier)
> >> goto isc_async_complete_err;
> >> }
> >>
> >> + ret = isc_mc_register(isc);
> >> + if (ret < 0)
> >> + goto isc_async_complete_unregister_device;
> >> return 0;
> >>
> >> +isc_async_complete_unregister_device:
> >> + video_unregister_device(vdev);
> >> +
> >> isc_async_complete_err:
> >> mutex_destroy(&isc->lock);
> >> return ret;
> >> diff --git a/drivers/media/platform/atmel/atmel-isc-mc.c b/drivers/media/platform/atmel/atmel-isc-mc.c
> >> new file mode 100644
> >> index 000000000000..2aea81d77b2f
> >> --- /dev/null
> >> +++ b/drivers/media/platform/atmel/atmel-isc-mc.c
> >> @@ -0,0 +1,287 @@
> >> +// SPDX-License-Identifier: GPL-2.0-only
> >> +/*
> >> + * Microchip Image Sensor Controller (ISC) Media Controller support
> >> + *
> >> + * Copyright (C) 2021 Microchip Technology, Inc.
> >> + *
> >> + * Author: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
> >> + *
> >> + */
> >> +
> >> +#include <media/v4l2-device.h>
> >> +#include <media/v4l2-subdev.h>
> >
> > Should you include <media/media-entity.h> and <media/media-device.h> ?
>
> Hi Jacopo,
>
> They are probably being included from another header. I will add them.
>

Thank you :)

> >
> > Also, should you select MEDIA_CONTROLLER and V4L2_SUBDEV_API for all
> > the Kconfig symbols ?
>
>
> VIDEO_ATMEL_ISC directly selects:
> select MEDIA_CONTROLLER
> select VIDEO_V4L2_SUBDEV_API
>
> and VIDEO_ATMEL_XISC
> depends on VIDEO_V4L2 && COMMON_CLK && VIDEO_V4L2_SUBDEV_API

And selects VIDEO_ATMEL_ISC_BASE so it's fine!

VIDEO_ATMEL_ISI does not. I'm fine if this is intended, I might have
got lost in the several pieces this driver is composed of :)

>
> and VIDEO_V4L2_SUBDEV_API depends on MEDIA_CONTROLLER
>
> >
> >> +
> >> +#include "atmel-isc-regs.h"
> >> +#include "atmel-isc.h"
> >> +
> >> +static const struct media_device_ops isc_media_ops = {
> >> +};
> >
> > Do you need this even if it's empty ?
> >
>
> Not sure. I can remove it and pass NULL, but I haven't checked what the
> subsystem is doing if there is no ops. I will try.
>

Seems like it is safe as the core checks for if (mdev->ops) before
accessing it (except for mc-request for which operations are
mandatory)

> >> +
> >> +static int isc_scaler_get_fmt(struct v4l2_subdev *sd,
> >> + struct v4l2_subdev_state *sd_state,
> >> + struct v4l2_subdev_format *format)
> >> +{
> >> + struct isc_device *isc = container_of(sd, struct isc_device, scaler_sd);
> >> + struct v4l2_mbus_framefmt *v4l2_try_fmt;
> >> +
> >> + if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
> >> + v4l2_try_fmt = v4l2_subdev_get_try_format(sd, sd_state,
> >> + format->pad);
> >> + format->format = *v4l2_try_fmt;
> >> +
> >> + return 0;
> >> + }
> >> +
> >> + format->format = isc->scaler_format;
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static int isc_scaler_set_fmt(struct v4l2_subdev *sd,
> >> + struct v4l2_subdev_state *sd_state,
> >> + struct v4l2_subdev_format *req_fmt)
> >> +{
> >> + struct isc_device *isc = container_of(sd, struct isc_device, scaler_sd);
> >> + struct v4l2_mbus_framefmt *v4l2_try_fmt;
> >> + struct isc_format *fmt;
> >> + unsigned int i;
> >> +
> >> + if (req_fmt->pad == ISC_SCALER_PAD_SOURCE)
> >> + v4l_bound_align_image
> >> + (&req_fmt->format.width, 16, isc->max_width, 0,
> >> + &req_fmt->format.height, 16, isc->max_height, 0, 0);
> >> + else
> >> + v4l_bound_align_image
> >> + (&req_fmt->format.width, 16, 10000, 0,
> >> + &req_fmt->format.height, 16, 10000, 0, 0);
> >> +
> >> + req_fmt->format.colorspace = V4L2_COLORSPACE_SRGB;
> >> + req_fmt->format.field = V4L2_FIELD_NONE;
> >> + req_fmt->format.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
> >> + req_fmt->format.quantization = V4L2_QUANTIZATION_DEFAULT;
> >> + req_fmt->format.xfer_func = V4L2_XFER_FUNC_DEFAULT;
> >> +
> >> + fmt = isc_find_format_by_code(isc, req_fmt->format.code, &i);
> >> +
> >> + if (!fmt)
> >> + fmt = &isc->formats_list[0];
> >> +
> >> + req_fmt->format.code = fmt->mbus_code;
> >> +
> >> + if (req_fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
> >> + v4l2_try_fmt = v4l2_subdev_get_try_format(sd, sd_state,
> >> + req_fmt->pad);
> >> + *v4l2_try_fmt = req_fmt->format;
> >> + /* Trying on the pad sink makes the source sink change too */
> >> + if (req_fmt->pad == ISC_SCALER_PAD_SINK) {
> >> + v4l2_try_fmt =
> >> + v4l2_subdev_get_try_format(sd, sd_state,
> >> + ISC_SCALER_PAD_SOURCE);
> >> + *v4l2_try_fmt = req_fmt->format;
> >> +
> >> + v4l_bound_align_image(&v4l2_try_fmt->width,
> >> + 16, isc->max_width, 0,
> >> + &v4l2_try_fmt->height,
> >> + 16, isc->max_height, 0, 0);
> >> + }
> >> + /* if we are just trying, we are done */
> >> + return 0;
> >> + }
> >> +
> >> + isc->scaler_format = req_fmt->format;
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static int isc_scaler_enum_mbus_code(struct v4l2_subdev *sd,
> >> + struct v4l2_subdev_state *sd_state,
> >> + struct v4l2_subdev_mbus_code_enum *code)
> >> +{
> >> + struct isc_device *isc = container_of(sd, struct isc_device, scaler_sd);
> >> + int supported_index = 0;
> >> + int i;
> >> +
> >> + for (i = 0; i < isc->formats_list_size; i++) {
> >> + if (!isc->formats_list[i].sd_support)
> >> + continue;
> >> + if (supported_index == code->index) {
> >> + code->code = isc->formats_list[i].mbus_code;
> >> + return 0;
> >> + }
> >> + supported_index++;
> >> + }
> >> +
> >> + return -EINVAL;
> >> +}
> >> +
> >> +static int isc_scaler_g_sel(struct v4l2_subdev *sd,
> >> + struct v4l2_subdev_state *sd_state,
> >> + struct v4l2_subdev_selection *sel)
> >> +{
> >> + struct isc_device *isc = container_of(sd, struct isc_device, scaler_sd);
> >> +
> >> + if (sel->pad == ISC_SCALER_PAD_SOURCE)
> >> + return -EINVAL;
> >> +
> >> + if (sel->target != V4L2_SEL_TGT_CROP_BOUNDS &&
> >> + sel->target != V4L2_SEL_TGT_CROP)
> >> + return -EINVAL;
> >> +
> >> + sel->r.height = isc->max_height;
> >> + sel->r.width = isc->max_width;
> >> +
> >> + sel->r.left = 0;
> >> + sel->r.top = 0;
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static int isc_scaler_init_cfg(struct v4l2_subdev *sd,
> >> + struct v4l2_subdev_state *sd_state)
> >> +{
> >> + struct v4l2_mbus_framefmt *v4l2_try_fmt =
> >> + v4l2_subdev_get_try_format(sd, sd_state, 0);
> >> + struct isc_device *isc = container_of(sd, struct isc_device, scaler_sd);
> >> +
> >> + *v4l2_try_fmt = isc->scaler_format;
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static const struct v4l2_subdev_pad_ops isc_scaler_pad_ops = {
> >> + .enum_mbus_code = isc_scaler_enum_mbus_code,
> >> + .set_fmt = isc_scaler_set_fmt,
> >> + .get_fmt = isc_scaler_get_fmt,
> >> + .get_selection = isc_scaler_g_sel,
> >> + .init_cfg = isc_scaler_init_cfg,
> >> +};
> >> +
> >> +static const struct v4l2_subdev_ops xisc_scaler_subdev_ops = {
> >> + .pad = &isc_scaler_pad_ops,
> >> +};
> >> +
> >> +static int isc_init_own_sd(struct isc_device *isc)
> >> +{
> >> + int ret;
> >> +
> >> + v4l2_subdev_init(&isc->scaler_sd, &xisc_scaler_subdev_ops);
> >> +
> >> + isc->scaler_sd.owner = THIS_MODULE;
> >> + isc->scaler_sd.dev = isc->dev;
> >> + snprintf(isc->scaler_sd.name, sizeof(isc->scaler_sd.name),
> >> + "atmel_isc_scaler");
> >> +
> >> + isc->scaler_sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> >> + isc->scaler_sd.entity.function = MEDIA_ENT_F_PROC_VIDEO_SCALER;
> >> + isc->scaler_pads[ISC_SCALER_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
> >> + isc->scaler_pads[ISC_SCALER_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
> >> +
> >> + isc->scaler_format.height = isc->max_height;
> >> + isc->scaler_format.width = isc->max_width;
> >> + isc->scaler_format.code = isc->formats_list[0].mbus_code;
> >> + isc->scaler_format.colorspace = V4L2_COLORSPACE_SRGB;
> >> + isc->scaler_format.field = V4L2_FIELD_NONE;
> >> + isc->scaler_format.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
> >> + isc->scaler_format.quantization = V4L2_QUANTIZATION_DEFAULT;
> >> + isc->scaler_format.xfer_func = V4L2_XFER_FUNC_DEFAULT;
> >> +
> >> + ret = media_entity_pads_init(&isc->scaler_sd.entity,
> >> + ISC_SCALER_PADS_NUM,
> >> + isc->scaler_pads);
> >> + if (ret < 0) {
> >> + dev_err(isc->dev, "scaler sd media entity init failed\n");
> >> + return ret;
> >> + }
> >> + ret = v4l2_device_register_subdev(&isc->v4l2_dev, &isc->scaler_sd);
> >> + if (ret < 0) {
> >> + dev_err(isc->dev, "scaler sd failed to register subdev\n");
> >> + return ret;
> >> + }
> >> +
> >> + return ret;
> >> +}
> >> +
> >> +int isc_mc_init(struct isc_device *isc, u32 ver)
> >> +{
> >> + const struct of_device_id *match;
> >> + int ret;
> >> +
> >> + isc->video_dev.entity.function = MEDIA_ENT_F_IO_V4L;
> >> + isc->video_dev.entity.flags = MEDIA_ENT_FL_DEFAULT;
> >> + isc->pads[ISC_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
> >> +
> >> + ret = media_entity_pads_init(&isc->video_dev.entity, ISC_PADS_NUM,
> >> + isc->pads);
> >> + if (ret < 0) {
> >> + dev_err(isc->dev, "media entity init failed\n");
> >> + return ret;
> >> + }
> >> +
> >> + isc->mdev.dev = isc->dev;
> >> + isc->mdev.ops = &isc_media_ops;
> >> +
> >> + match = of_match_node(isc->dev->driver->of_match_table,
> >> + isc->dev->of_node);
> >> +
> >> + strscpy(isc->mdev.driver_name, KBUILD_MODNAME,
> >> + sizeof(isc->mdev.driver_name));
> >> + strscpy(isc->mdev.model, match->compatible, sizeof(isc->mdev.model));
> >> + snprintf(isc->mdev.bus_info, sizeof(isc->mdev.bus_info), "platform:%s",
> >> + isc->v4l2_dev.name);
> >> + isc->mdev.hw_revision = ver;
> >> +
> >> + media_device_init(&isc->mdev);
> >> +
> >> + isc->v4l2_dev.mdev = &isc->mdev;
> >> +
> >> + return isc_init_own_sd(isc);
> >> +}
> >> +EXPORT_SYMBOL_GPL(isc_mc_init);
> >> +
> >> +int isc_mc_register(struct isc_device *isc)
> >> +{
> >> + int ret;
> >> +
> >> + ret = media_create_pad_link(&isc->current_subdev->sd->entity,
> >> + isc->remote_pad, &isc->scaler_sd.entity,
> >> + ISC_SCALER_PAD_SINK,
> >> + MEDIA_LNK_FL_ENABLED |
> >> + MEDIA_LNK_FL_IMMUTABLE);
> >> +
> >> + if (ret < 0) {
> >> + v4l2_err(&isc->v4l2_dev,
> >> + "Failed to create pad link: %s to %s\n",
> >> + isc->current_subdev->sd->entity.name,
> >> + isc->scaler_sd.entity.name);
> >> + return ret;
> >> + }
> >> +
> >> + dev_dbg(isc->dev, "link with %s pad: %d\n",
> >> + isc->current_subdev->sd->name, isc->remote_pad);
> >> +
> >> + ret = media_create_pad_link(&isc->scaler_sd.entity,
> >> + ISC_SCALER_PAD_SOURCE,
> >> + &isc->video_dev.entity, ISC_PAD_SINK,
> >> + MEDIA_LNK_FL_ENABLED |
> >> + MEDIA_LNK_FL_IMMUTABLE);
> >> +
> >> + if (ret < 0) {
> >> + v4l2_err(&isc->v4l2_dev,
> >> + "Failed to create pad link: %s to %s\n",
> >> + isc->scaler_sd.entity.name,
> >> + isc->video_dev.entity.name);
> >> + return ret;
> >> + }
> >> +
> >> + dev_dbg(isc->dev, "link with %s pad: %d\n", isc->scaler_sd.name,
> >> + ISC_SCALER_PAD_SOURCE);
> >> +
> >> + return media_device_register(&isc->mdev);
> >
> > I feel like the isc-base driver shold instead register the
> > media-controller and this file shuld actually be only about
> > isc-scaler or something. I might be missing why it is not possible
> > though. It doesn't seem to me that mc support is conditional, so it
> > can happen in the base driver directly ?
>
> This actually is the base driver. Just that the atmel-isc-base.c is
> pretty crowded. So I moved the MC part in this file. But it's the same
> base driver.
>

I understand. isc-base is pretty big, you're right.
However breaking mc apart in a file that mixes registering an entity
for the scaler and initializing mc for the whole driver feels weird,
at least to me, as I don't immediately get why the mc part is handled
by the scaler file...

> >
> > Links creation can still happen at async_complete() (I would have
> > suggested _bound() time, but you have no asyn subdev for the scaler,
> > so I guess the only async subdev here is the sensor).
>
> Yes, the sensor or any kind of subdevice (XISC normally is connected to
> a bridge, ISC to a sensor directly )
>
> >
> > All in all: can this function be removed and:
> > 1) Base driver registers the media controller device in probe
>
> Should we register the media device even if it's not operational ? and
> no video device has been registered ?
> I thought it would be safer to have it registered with all the
> links/entities/etc once the video node has been completed.
>
> But if you say this is the proper way, I can do that.
> I wanted to keep things separated and not overcrowd the base file /probe
> function, but if it's just a media_device_register call, I can do it there.

You are right. Calling media_device_register() at async_complete time
is the right thing to do.

Thanks
j


>
> > 2) links are created at async_complete time ?
>
> That works too. I think I could move them there.
>
> Thanks for reviewing,
>
> Eugen
>
> >
> > Thanks
> > j
> >
> >
> >> +}
> >> +EXPORT_SYMBOL_GPL(isc_mc_register);
> >> +
> >> +void isc_mc_cleanup(struct isc_device *isc)
> >> +{
> >> + media_entity_cleanup(&isc->video_dev.entity);
> >> +}
> >> +EXPORT_SYMBOL_GPL(isc_mc_cleanup);
> >> diff --git a/drivers/media/platform/atmel/atmel-isc.h b/drivers/media/platform/atmel/atmel-isc.h
> >> index 07fa6dbf8460..0b6370d7775f 100644
> >> --- a/drivers/media/platform/atmel/atmel-isc.h
> >> +++ b/drivers/media/platform/atmel/atmel-isc.h
> >> @@ -183,6 +183,17 @@ struct isc_reg_offsets {
> >> u32 his_entry;
> >> };
> >>
> >> +enum isc_mc_pads {
> >> + ISC_PAD_SINK = 0,
> >> + ISC_PADS_NUM = 1,
> >> +};
> >> +
> >> +enum isc_scaler_pads {
> >> + ISC_SCALER_PAD_SINK = 0,
> >> + ISC_SCALER_PAD_SOURCE = 1,
> >> + ISC_SCALER_PADS_NUM = 2,
> >> +};
> >> +
> >> /*
> >> * struct isc_device - ISC device driver data/config struct
> >> * @regmap: Register map
> >> @@ -258,6 +269,12 @@ struct isc_reg_offsets {
> >> * be used as an input to the controller
> >> * @controller_formats_size: size of controller_formats array
> >> * @formats_list_size: size of formats_list array
> >> + * @pads: media controller pads for isc video entity
> >> + * @mdev: media device that is registered by the isc
> >> + * @remote_pad: remote pad on the connected subdevice
> >> + * @scaler_sd: subdevice for the scaler that isc registers
> >> + * @scaler_pads: media controller pads for the scaler subdevice
> >> + * @scaler_format: current format for the scaler subdevice
> >> */
> >> struct isc_device {
> >> struct regmap *regmap;
> >> @@ -346,6 +363,19 @@ struct isc_device {
> >> struct isc_format *formats_list;
> >> u32 controller_formats_size;
> >> u32 formats_list_size;
> >> +
> >> + struct {
> >> + struct media_pad pads[ISC_PADS_NUM];
> >> + struct media_device mdev;
> >> +
> >> + u32 remote_pad;
> >> + };
> >> +
> >> + struct {
> >> + struct v4l2_subdev scaler_sd;
> >> + struct media_pad scaler_pads[ISC_SCALER_PADS_NUM];
> >> + struct v4l2_mbus_framefmt scaler_format;
> >> + };
> >> };
> >>
> >> extern const struct regmap_config isc_regmap_config;
> >> @@ -357,4 +387,10 @@ int isc_clk_init(struct isc_device *isc);
> >> void isc_subdev_cleanup(struct isc_device *isc);
> >> void isc_clk_cleanup(struct isc_device *isc);
> >>
> >> +int isc_mc_init(struct isc_device *isc, u32 ver);
> >> +int isc_mc_register(struct isc_device *isc);
> >> +void isc_mc_cleanup(struct isc_device *isc);
> >> +
> >> +struct isc_format *isc_find_format_by_code(struct isc_device *isc,
> >> + unsigned int code, int *index);
> >> #endif
> >> diff --git a/drivers/media/platform/atmel/atmel-sama5d2-isc.c b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
> >> index 1b2063cce0f7..a3e4c32a66c4 100644
> >> --- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
> >> +++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
> >> @@ -529,6 +529,12 @@ static int atmel_isc_probe(struct platform_device *pdev)
> >> break;
> >> }
> >>
> >> + regmap_read(isc->regmap, ISC_VERSION + isc->offsets.version, &ver);
> >> +
> >> + ret = isc_mc_init(isc, ver);
> >> + if (ret < 0)
> >> + goto isc_probe_mc_init_err;
> >> +
> >> pm_runtime_set_active(dev);
> >> pm_runtime_enable(dev);
> >> pm_request_idle(dev);
> >> @@ -538,7 +544,7 @@ static int atmel_isc_probe(struct platform_device *pdev)
> >> ret = clk_prepare_enable(isc->ispck);
> >> if (ret) {
> >> dev_err(dev, "failed to enable ispck: %d\n", ret);
> >> - goto cleanup_subdev;
> >> + goto isc_probe_mc_init_err;
> >> }
> >>
> >> /* ispck should be greater or equal to hclock */
> >> @@ -548,7 +554,6 @@ static int atmel_isc_probe(struct platform_device *pdev)
> >> goto unprepare_clk;
> >> }
> >>
> >> - regmap_read(isc->regmap, ISC_VERSION + isc->offsets.version, &ver);
> >> dev_info(dev, "Microchip ISC version %x\n", ver);
> >>
> >> return 0;
> >> @@ -556,6 +561,9 @@ static int atmel_isc_probe(struct platform_device *pdev)
> >> unprepare_clk:
> >> clk_disable_unprepare(isc->ispck);
> >>
> >> +isc_probe_mc_init_err:
> >> + isc_mc_cleanup(isc);
> >> +
> >> cleanup_subdev:
> >> isc_subdev_cleanup(isc);
> >>
> >> @@ -576,6 +584,8 @@ static int atmel_isc_remove(struct platform_device *pdev)
> >>
> >> pm_runtime_disable(&pdev->dev);
> >>
> >> + isc_mc_cleanup(isc);
> >> +
> >> isc_subdev_cleanup(isc);
> >>
> >> v4l2_device_unregister(&isc->v4l2_dev);
> >> diff --git a/drivers/media/platform/atmel/atmel-sama7g5-isc.c b/drivers/media/platform/atmel/atmel-sama7g5-isc.c
> >> index 2b1082295c13..d2ac80b1ccc3 100644
> >> --- a/drivers/media/platform/atmel/atmel-sama7g5-isc.c
> >> +++ b/drivers/media/platform/atmel/atmel-sama7g5-isc.c
> >> @@ -523,15 +523,23 @@ static int microchip_xisc_probe(struct platform_device *pdev)
> >> break;
> >> }
> >>
> >> + regmap_read(isc->regmap, ISC_VERSION + isc->offsets.version, &ver);
> >> +
> >> + ret = isc_mc_init(isc, ver);
> >> + if (ret < 0)
> >> + goto isc_probe_mc_init_err;
> >> +
> >> pm_runtime_set_active(dev);
> >> pm_runtime_enable(dev);
> >> pm_request_idle(dev);
> >>
> >> - regmap_read(isc->regmap, ISC_VERSION + isc->offsets.version, &ver);
> >> dev_info(dev, "Microchip XISC version %x\n", ver);
> >>
> >> return 0;
> >>
> >> +isc_probe_mc_init_err:
> >> + isc_mc_cleanup(isc);
> >> +
> >> cleanup_subdev:
> >> isc_subdev_cleanup(isc);
> >>
> >> @@ -552,6 +560,8 @@ static int microchip_xisc_remove(struct platform_device *pdev)
> >>
> >> pm_runtime_disable(&pdev->dev);
> >>
> >> + isc_mc_cleanup(isc);
> >> +
> >> isc_subdev_cleanup(isc);
> >>
> >> v4l2_device_unregister(&isc->v4l2_dev);
> >> --
> >> 2.25.1
> >>
>