[PATCH] ARM: dts: at91: sama7g5: Add NAND support

From: Tudor Ambarus
Date: Tue Jan 11 2022 - 08:06:03 EST


Add NAND support. The sama7g5's SMC IP is the same as sama5d2's with
a slightly change: it provides a synchronous clock output (SMC clock)
that is dedicated to FPGA usage. Since this doesn't interfere with the SMC
NAND configuration, thus code will not be added in the current nand driver
to address the FPGA usage, use the sama5d2's compatible and choose not to
introduce dedicated compatibles for sama7g5.
Tested with Micron MT29F4G08ABAEAWP NAND flash.

Signed-off-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>
---
The patch depends on the following patch:
https://lore.kernel.org/linux-clk/20220111125310.902856-1-tudor.ambarus@xxxxxxxxxxxxx/T/#u

arch/arm/boot/dts/sama7g5.dtsi | 55 ++++++++++++++++++++++++++++++++++
1 file changed, 55 insertions(+)

diff --git a/arch/arm/boot/dts/sama7g5.dtsi b/arch/arm/boot/dts/sama7g5.dtsi
index eddcfbf4d223..7972cb8c2562 100644
--- a/arch/arm/boot/dts/sama7g5.dtsi
+++ b/arch/arm/boot/dts/sama7g5.dtsi
@@ -75,6 +75,45 @@ soc {
#size-cells = <1>;
ranges;

+ nfc_sram: sram@600000 {
+ compatible = "mmio-sram";
+ no-memory-wc;
+ reg = <0x00600000 0x2400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x00600000 0x2400>;
+ };
+
+ nfc_io: nfc-io@10000000 {
+ compatible = "atmel,sama5d3-nfc-io", "syscon";
+ reg = <0x10000000 0x8000000>;
+ };
+
+ ebi: ebi@40000000 {
+ compatible = "atmel,sama5d3-ebi";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ atmel,smc = <&hsmc>;
+ reg = <0x40000000 0x20000000>;
+ ranges = <0x0 0x0 0x40000000 0x8000000
+ 0x1 0x0 0x48000000 0x8000000
+ 0x2 0x0 0x50000000 0x8000000
+ 0x3 0x0 0x58000000 0x8000000>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_MCK1>;
+ status = "disabled";
+
+ nand_controller: nand-controller {
+ compatible = "atmel,sama5d3-nand-controller";
+ atmel,nfc-sram = <&nfc_sram>;
+ atmel,nfc-io = <&nfc_io>;
+ ecc-engine = <&pmecc>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+ status = "disabled";
+ };
+ };
+
securam: securam@e0000000 {
compatible = "microchip,sama7g5-securam", "atmel,sama5d2-securam", "mmio-sram";
reg = <0xe0000000 0x4000>;
@@ -181,6 +220,22 @@ tcb1: timer@e0800000 {
clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
};

+ hsmc: hsmc@e0808000 {
+ compatible = "atmel,sama5d2-smc", "syscon", "simple-mfd";
+ reg = <0xe0808000 0x1000>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pmecc: ecc-engine@e0808070 {
+ compatible = "atmel,sama5d2-pmecc";
+ reg = <0xe0808070 0x490>,
+ <0xe0808500 0x200>;
+ };
+ };
+
qspi0: spi@e080c000 {
compatible = "microchip,sama7g5-ospi";
reg = <0xe080c000 0x400>, <0x20000000 0x10000000>;
--
2.25.1