Re: [PATCH v2] net: ethernet: sun4i-emac: replace magic number with macro

From: Conley Lee
Date: Mon Jan 10 2022 - 22:20:08 EST


On 01/10/22 at 02:56下午, Corentin Labbe wrote:
> Date: Mon, 10 Jan 2022 14:56:35 +0100
> From: Corentin Labbe <clabbe.montjoie@xxxxxxxxx>
> To: Conley Lee <conleylee@xxxxxxxxxxx>
> Cc: davem@xxxxxxxxxxxxx, kuba@xxxxxxxxxx, mripard@xxxxxxxxxx,
> wens@xxxxxxxx, netdev@xxxxxxxxxxxxxxx,
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx, linux-kernel@xxxxxxxxxxxxxxx
> Subject: Re: [PATCH v2] net: ethernet: sun4i-emac: replace magic number
> with macro
>
> Le Mon, Jan 10, 2022 at 07:35:49PM +0800, Conley Lee a écrit :
> > This patch remove magic numbers in sun4i-emac.c and replace with macros
> > defined in sun4i-emac.h
> >
> > Change since v1
> > ---------------
> > - reformat
> > - merge commits
> > - add commit message
> >
> > Signed-off-by: Conley Lee <conleylee@xxxxxxxxxxx>
> > ---
> > drivers/net/ethernet/allwinner/sun4i-emac.c | 30 ++++++++++++---------
> > drivers/net/ethernet/allwinner/sun4i-emac.h | 18 +++++++++++++
> > 2 files changed, 35 insertions(+), 13 deletions(-)
> >
> > diff --git a/drivers/net/ethernet/allwinner/sun4i-emac.c b/drivers/net/ethernet/allwinner/sun4i-emac.c
> > index 849de4564709..98fd98feb439 100644
> > --- a/drivers/net/ethernet/allwinner/sun4i-emac.c
> > +++ b/drivers/net/ethernet/allwinner/sun4i-emac.c
> > @@ -106,9 +106,9 @@ static void emac_update_speed(struct net_device *dev)
> >
> > /* set EMAC SPEED, depend on PHY */
> > reg_val = readl(db->membase + EMAC_MAC_SUPP_REG);
> > - reg_val &= ~(0x1 << 8);
> > + reg_val &= ~EMAC_MAC_SUPP_100M;
> > if (db->speed == SPEED_100)
> > - reg_val |= 1 << 8;
> > + reg_val |= EMAC_MAC_SUPP_100M;
> > writel(reg_val, db->membase + EMAC_MAC_SUPP_REG);
> > }
> >
> > @@ -264,7 +264,7 @@ static void emac_dma_done_callback(void *arg)
> >
> > /* re enable interrupt */
> > reg_val = readl(db->membase + EMAC_INT_CTL_REG);
> > - reg_val |= (0x01 << 8);
> > + reg_val |= EMAC_INT_CTL_RX_EN;
> > writel(reg_val, db->membase + EMAC_INT_CTL_REG);
> >
> > db->emacrx_completed_flag = 1;
> > @@ -429,7 +429,7 @@ static unsigned int emac_powerup(struct net_device *ndev)
> > /* initial EMAC */
> > /* flush RX FIFO */
> > reg_val = readl(db->membase + EMAC_RX_CTL_REG);
> > - reg_val |= 0x8;
> > + reg_val |= EMAC_RX_CTL_FLUSH_FIFO;
> > writel(reg_val, db->membase + EMAC_RX_CTL_REG);
> > udelay(1);
> >
> > @@ -441,8 +441,8 @@ static unsigned int emac_powerup(struct net_device *ndev)
> >
> > /* set MII clock */
> > reg_val = readl(db->membase + EMAC_MAC_MCFG_REG);
> > - reg_val &= (~(0xf << 2));
> > - reg_val |= (0xD << 2);
> > + reg_val &= ~EMAC_MAC_MCFG_MII_CLKD_MASK;
> > + reg_val |= EMAC_MAC_MCFG_MII_CLKD_72;
> > writel(reg_val, db->membase + EMAC_MAC_MCFG_REG);
> >
> > /* clear RX counter */
> > @@ -506,7 +506,7 @@ static void emac_init_device(struct net_device *dev)
> >
> > /* enable RX/TX0/RX Hlevel interrup */
> > reg_val = readl(db->membase + EMAC_INT_CTL_REG);
> > - reg_val |= (0xf << 0) | (0x01 << 8);
> > + reg_val |= (EMAC_INT_CTL_TX_EN | EMAC_INT_CTL_TX_ABRT_EN | EMAC_INT_CTL_RX_EN);
> > writel(reg_val, db->membase + EMAC_INT_CTL_REG);
> >
> > spin_unlock_irqrestore(&db->lock, flags);
> > @@ -637,7 +637,9 @@ static void emac_rx(struct net_device *dev)
> > if (!rxcount) {
> > db->emacrx_completed_flag = 1;
> > reg_val = readl(db->membase + EMAC_INT_CTL_REG);
> > - reg_val |= (0xf << 0) | (0x01 << 8);
> > + reg_val |=
> > + (EMAC_INT_CTL_TX_EN | EMAC_INT_CTL_TX_ABRT_EN |
> > + EMAC_INT_CTL_RX_EN);
> > writel(reg_val, db->membase + EMAC_INT_CTL_REG);
> >
> > /* had one stuck? */
> > @@ -669,7 +671,9 @@ static void emac_rx(struct net_device *dev)
> > writel(reg_val | EMAC_CTL_RX_EN,
> > db->membase + EMAC_CTL_REG);
> > reg_val = readl(db->membase + EMAC_INT_CTL_REG);
> > - reg_val |= (0xf << 0) | (0x01 << 8);
> > + reg_val |=
> > + (EMAC_INT_CTL_TX_EN | EMAC_INT_CTL_TX_ABRT_EN |
> > + EMAC_INT_CTL_RX_EN);
> > writel(reg_val, db->membase + EMAC_INT_CTL_REG);
> >
> > db->emacrx_completed_flag = 1;
> > @@ -783,20 +787,20 @@ static irqreturn_t emac_interrupt(int irq, void *dev_id)
> > }
> >
> > /* Transmit Interrupt check */
> > - if (int_status & (0x01 | 0x02))
> > + if (int_status & EMAC_INT_STA_TX_COMPLETE)
> > emac_tx_done(dev, db, int_status);
> >
> > - if (int_status & (0x04 | 0x08))
> > + if (int_status & EMAC_INT_STA_TX_ABRT)
> > netdev_info(dev, " ab : %x\n", int_status);
> >
> > /* Re-enable interrupt mask */
> > if (db->emacrx_completed_flag == 1) {
> > reg_val = readl(db->membase + EMAC_INT_CTL_REG);
> > - reg_val |= (0xf << 0) | (0x01 << 8);
> > + reg_val |= (EMAC_INT_CTL_TX_EN | EMAC_INT_CTL_TX_ABRT_EN | EMAC_INT_CTL_RX_EN);
> > writel(reg_val, db->membase + EMAC_INT_CTL_REG);
> > } else {
> > reg_val = readl(db->membase + EMAC_INT_CTL_REG);
> > - reg_val |= (0xf << 0);
> > + reg_val |= (EMAC_INT_CTL_TX_EN | EMAC_INT_CTL_TX_ABRT_EN);
> > writel(reg_val, db->membase + EMAC_INT_CTL_REG);
> > }
> >
> > diff --git a/drivers/net/ethernet/allwinner/sun4i-emac.h b/drivers/net/ethernet/allwinner/sun4i-emac.h
> > index 38c72d9ec600..90bd9ad77607 100644
> > --- a/drivers/net/ethernet/allwinner/sun4i-emac.h
> > +++ b/drivers/net/ethernet/allwinner/sun4i-emac.h
> > @@ -38,6 +38,7 @@
> > #define EMAC_RX_CTL_REG (0x3c)
> > #define EMAC_RX_CTL_AUTO_DRQ_EN (1 << 1)
> > #define EMAC_RX_CTL_DMA_EN (1 << 2)
> > +#define EMAC_RX_CTL_FLUSH_FIFO (1 << 3)
> > #define EMAC_RX_CTL_PASS_ALL_EN (1 << 4)
> > #define EMAC_RX_CTL_PASS_CTL_EN (1 << 5)
> > #define EMAC_RX_CTL_PASS_CRC_ERR_EN (1 << 6)
> > @@ -61,7 +62,21 @@
> > #define EMAC_RX_IO_DATA_STATUS_OK (1 << 7)
> > #define EMAC_RX_FBC_REG (0x50)
> > #define EMAC_INT_CTL_REG (0x54)
> > +#define EMAC_INT_CTL_RX_EN (1 << 8)
> > +#define EMAC_INT_CTL_TX0_EN (1)
> > +#define EMAC_INT_CTL_TX1_EN (1 << 1)
> > +#define EMAC_INT_CTL_TX_EN (EMAC_INT_CTL_TX0_EN | EMAC_INT_CTL_TX1_EN)
> > +#define EMAC_INT_CTL_TX0_ABRT_EN (0x1 << 2)
> > +#define EMAC_INT_CTL_TX1_ABRT_EN (0x1 << 3)
> > +#define EMAC_INT_CTL_TX_ABRT_EN (EMAC_INT_CTL_TX0_ABRT_EN | EMAC_INT_CTL_TX1_ABRT_EN)
> > #define EMAC_INT_STA_REG (0x58)
> > +#define EMAC_INT_STA_TX0_COMPLETE (0x1)
> > +#define EMAC_INT_STA_TX1_COMPLETE (0x1 << 1)
> > +#define EMAC_INT_STA_TX_COMPLETE (EMAC_INT_STA_TX0_COMPLETE | EMAC_INT_STA_TX1_COMPLETE)
> > +#define EMAC_INT_STA_TX0_ABRT (0x1 << 2)
> > +#define EMAC_INT_STA_TX1_ABRT (0x1 << 3)
> > +#define EMAC_INT_STA_TX_ABRT (EMAC_INT_STA_TX0_ABRT | EMAC_INT_STA_TX1_ABRT)
> > +#define EMAC_INT_STA_RX_COMPLETE (0x1 << 8)
>
> Hello
>
> As proposed by checkpatch, I thing there are several place (like all EMAC_INT_STA) where you could use BIT(x) instead of (0xX << x)
>
> Regards
Hi ~
Thanks for your suggestion. But I think it might be better to keep the code style consistent,
so I didn't change it in the new version of this patch.