Re: [PATCH v11 09/15] iio: afe: rescale: reduce risk of integer overflow

From: Liam Beguin
Date: Sat Jan 08 2022 - 11:35:02 EST


Hi Andy,

On Wed, Dec 22, 2021 at 11:32:24PM +0200, Andy Shevchenko wrote:
> On Wed, Dec 22, 2021 at 9:59 PM Liam Beguin <liambeguin@xxxxxxxxx> wrote:
> > On Wed, Dec 22, 2021 at 08:56:12PM +0200, Andy Shevchenko wrote:
> > > On Wed, Dec 22, 2021 at 8:38 PM Liam Beguin <liambeguin@xxxxxxxxx> wrote:
> > > > On Wed, Dec 22, 2021 at 02:29:04PM +0200, Andy Shevchenko wrote:
> > > > > On Wed, Dec 22, 2021 at 5:47 AM Liam Beguin <liambeguin@xxxxxxxxx> wrote:
>
> ...
>
> > > > > > - tmp = 1 << *val2;
> > > > >
> > > > > At some point this should be BIT()
> > >
> > > Forgot to add, If it's 64-bit, then BIT_ULL().
> > >
> > > > I'm not against changing this, but (to me at least) 1 << *val2 seems
> > > > more explicit as we're not working with bitfields. No?
> > >
> > > You may add a comment. You may use int_pow(), but it will be suboptimal.
> > >
> > > > > Rule of thumb (in accordance with C standard), always use unsigned
> > > > > value as left operand of the _left_ shift.
> > > >
> > > > Right, that makes sense! In practice though, since we'll most likely
> > > > never use higher bits of *val2 with IIO_VAL_FRACTIONAL_LOG2, would it be
> > > > enough to simply typecast?
> > > >
> > > > tmp = 1 << (unsigned int)*val2;
> > >
> > > No, it's about the _left_ operand.
> > > I haven't checked if tmp is 64-bit, then even that would be still wrong.
> >
> > Okay so your recommendation is to not use a left shift?
>
> No, I recommend not to use int type as a _leftside_ operand.
> BIT() / BIT_ULL() does a left shift anyway.

Oh, got it. Sorry for misreading your message.
would something like this be good enough?

s64 tmp;
u64 tmp2;

tmp2 = 1 << *val2;
tmp = tmp2;

...

How can I validate this?

> > I can look into that but given how unlikely it is to fall into those bad
> > cases, I'd rather keep things as they are. Would that be okay?
>
> > Also, I don't think using BIT() or BIT_ULL() would address this as they
> > both do the same shift, with no extra checks.
>
> They do slightly different versions of it. They use an unsigned int type.
>
> Open coded or not, it's up to you. Just convert to unsigned int.
>
> --
> With Best Regards,
> Andy Shevchenko

Cheers,
Liam