Re: [PATCH 2/2] regulator: Add MAX20086-MAX20089 driver

[Mark Brown]

On Thu, Jan 06, 2022 at 01:23:07AM +0200, Laurent Pinchart wrote:
> On Tue, Jan 04, 2022 at 04:33:54PM +0200, Laurent Pinchart wrote:
> > On Tue, Jan 04, 2022 at 02:16:33PM +0000, Mark Brown wrote:

> > > It is worrying that a regulator driver should need the interfaces for
> > > machines...  the driver doesn't look like it actually does though.

> > I'll try to remove it.

> It compiles fine, but I won't be able to check the init data to figure
> out the initial enable GPIO state if I don't include machine.h, as
> that's where regulator_init_data is defined. Am I missing something ?

Right, forgot about that bit - it's more of an issue with the gpiod
conversion.  You could just request always enabled but it's probably
fine to leave as is with looking at but not modifying the constraints.

> > > > +static const struct regmap_config max20086_regmap_config = {
> > > > +	.reg_bits = 8,
> > > > +	.val_bits = 8,
> > > > +	.writeable_reg = max20086_gen_is_writeable_reg,
> > > > +	.max_register = 0x9,
> > > > +	.cache_type = REGCACHE_NONE,
> > > > +};

> > > No readback support?

> > I'll fix that.

> Actually I'm not sure what you mean here. All registers are readable,
> what's wrong with the above regmap_config ?

It's not *wrong* if that's the case, it just looks weird to only provide
writable but not readable.

Attachment: signature.asc
Description: PGP signature