[PATCH 3/5] habanalabs: refactor reset information variables

From: Oded Gabbay
Date: Sun Dec 26 2021 - 07:43:23 EST


From: Ofir Bitton <obitton@xxxxxxxxx>

Unify variables related to device reset, which will help us to
add some new reset functionality in future patches.

Signed-off-by: Ofir Bitton <obitton@xxxxxxxxx>
Reviewed-by: Oded Gabbay <ogabbay@xxxxxxxxxx>
Signed-off-by: Oded Gabbay <ogabbay@xxxxxxxxxx>
---
.../misc/habanalabs/common/command_buffer.c | 2 +-
.../habanalabs/common/command_submission.c | 4 +-
drivers/misc/habanalabs/common/debugfs.c | 18 ++---
drivers/misc/habanalabs/common/device.c | 76 +++++++++---------
drivers/misc/habanalabs/common/firmware_if.c | 6 +-
drivers/misc/habanalabs/common/habanalabs.h | 79 +++++++++++--------
.../misc/habanalabs/common/habanalabs_drv.c | 4 +-
.../misc/habanalabs/common/habanalabs_ioctl.c | 4 +-
drivers/misc/habanalabs/common/irq.c | 2 +-
drivers/misc/habanalabs/common/memory.c | 2 +-
drivers/misc/habanalabs/common/sysfs.c | 10 +--
drivers/misc/habanalabs/gaudi/gaudi.c | 8 +-
drivers/misc/habanalabs/goya/goya.c | 10 +--
13 files changed, 119 insertions(+), 106 deletions(-)

diff --git a/drivers/misc/habanalabs/common/command_buffer.c b/drivers/misc/habanalabs/common/command_buffer.c
index e7534b5129fa..649380bb189f 100644
--- a/drivers/misc/habanalabs/common/command_buffer.c
+++ b/drivers/misc/habanalabs/common/command_buffer.c
@@ -250,7 +250,7 @@ int hl_cb_create(struct hl_device *hdev, struct hl_cb_mgr *mgr,
* Can't use generic function to check this because of special case
* where we create a CB as part of the reset process
*/
- if ((hdev->disabled) || ((atomic_read(&hdev->in_reset)) &&
+ if ((hdev->disabled) || ((atomic_read(&hdev->reset_info.in_reset)) &&
(ctx_id != HL_KERNEL_ASID_ID))) {
dev_warn_ratelimited(hdev->dev,
"Device is disabled or in reset. Can't create new CBs\n");
diff --git a/drivers/misc/habanalabs/common/command_submission.c b/drivers/misc/habanalabs/common/command_submission.c
index d39343f90bc2..0a4ef13d9ac4 100644
--- a/drivers/misc/habanalabs/common/command_submission.c
+++ b/drivers/misc/habanalabs/common/command_submission.c
@@ -777,7 +777,7 @@ static void cs_timedout(struct work_struct *work)
if (hdev->reset_on_lockup)
hl_device_reset(hdev, HL_DRV_RESET_TDR);
else
- hdev->needs_reset = true;
+ hdev->reset_info.needs_reset = true;
}
}

@@ -814,7 +814,7 @@ static int allocate_cs(struct hl_device *hdev, struct hl_ctx *ctx,
cs->encaps_signals = !!(flags & HL_CS_FLAGS_ENCAP_SIGNALS);
cs->timeout_jiffies = timeout;
cs->skip_reset_on_timeout =
- hdev->skip_reset_on_timeout ||
+ hdev->reset_info.skip_reset_on_timeout ||
!!(flags & HL_CS_FLAGS_SKIP_RESET_ON_TIMEOUT);
cs->submission_time_jiffies = jiffies;
INIT_LIST_HEAD(&cs->job_list);
diff --git a/drivers/misc/habanalabs/common/debugfs.c b/drivers/misc/habanalabs/common/debugfs.c
index 2e9c31d79d5e..746d1a18de63 100644
--- a/drivers/misc/habanalabs/common/debugfs.c
+++ b/drivers/misc/habanalabs/common/debugfs.c
@@ -527,7 +527,7 @@ static int engines_show(struct seq_file *s, void *data)
struct hl_dbg_device_entry *dev_entry = entry->dev_entry;
struct hl_device *hdev = dev_entry->hdev;

- if (atomic_read(&hdev->in_reset)) {
+ if (atomic_read(&hdev->reset_info.in_reset)) {
dev_warn_ratelimited(hdev->dev,
"Can't check device idle during reset\n");
return 0;
@@ -658,7 +658,7 @@ static ssize_t hl_data_read32(struct file *f, char __user *buf,
ssize_t rc;
u32 val;

- if (atomic_read(&hdev->in_reset)) {
+ if (atomic_read(&hdev->reset_info.in_reset)) {
dev_warn_ratelimited(hdev->dev, "Can't read during reset\n");
return 0;
}
@@ -694,7 +694,7 @@ static ssize_t hl_data_write32(struct file *f, const char __user *buf,
u32 value;
ssize_t rc;

- if (atomic_read(&hdev->in_reset)) {
+ if (atomic_read(&hdev->reset_info.in_reset)) {
dev_warn_ratelimited(hdev->dev, "Can't write during reset\n");
return 0;
}
@@ -731,7 +731,7 @@ static ssize_t hl_data_read64(struct file *f, char __user *buf,
ssize_t rc;
u64 val;

- if (atomic_read(&hdev->in_reset)) {
+ if (atomic_read(&hdev->reset_info.in_reset)) {
dev_warn_ratelimited(hdev->dev, "Can't read during reset\n");
return 0;
}
@@ -767,7 +767,7 @@ static ssize_t hl_data_write64(struct file *f, const char __user *buf,
u64 value;
ssize_t rc;

- if (atomic_read(&hdev->in_reset)) {
+ if (atomic_read(&hdev->reset_info.in_reset)) {
dev_warn_ratelimited(hdev->dev, "Can't write during reset\n");
return 0;
}
@@ -802,7 +802,7 @@ static ssize_t hl_dma_size_write(struct file *f, const char __user *buf,
ssize_t rc;
u32 size;

- if (atomic_read(&hdev->in_reset)) {
+ if (atomic_read(&hdev->reset_info.in_reset)) {
dev_warn_ratelimited(hdev->dev, "Can't DMA during reset\n");
return 0;
}
@@ -1077,7 +1077,7 @@ static ssize_t hl_clk_gate_write(struct file *f, const char __user *buf,
u64 value;
ssize_t rc;

- if (atomic_read(&hdev->in_reset)) {
+ if (atomic_read(&hdev->reset_info.in_reset)) {
dev_warn_ratelimited(hdev->dev,
"Can't change clock gating during reset\n");
return 0;
@@ -1119,7 +1119,7 @@ static ssize_t hl_stop_on_err_write(struct file *f, const char __user *buf,
u32 value;
ssize_t rc;

- if (atomic_read(&hdev->in_reset)) {
+ if (atomic_read(&hdev->reset_info.in_reset)) {
dev_warn_ratelimited(hdev->dev,
"Can't change stop on error during reset\n");
return 0;
@@ -1497,7 +1497,7 @@ void hl_debugfs_add_device(struct hl_device *hdev)
debugfs_create_x8("skip_reset_on_timeout",
0644,
dev_entry->root,
- &hdev->skip_reset_on_timeout);
+ &hdev->reset_info.skip_reset_on_timeout);

debugfs_create_file("state_dump",
0600,
diff --git a/drivers/misc/habanalabs/common/device.c b/drivers/misc/habanalabs/common/device.c
index f1f482c5cdcb..f8f9eb7a934f 100644
--- a/drivers/misc/habanalabs/common/device.c
+++ b/drivers/misc/habanalabs/common/device.c
@@ -17,9 +17,9 @@ enum hl_device_status hl_device_status(struct hl_device *hdev)
{
enum hl_device_status status;

- if (atomic_read(&hdev->in_reset))
+ if (atomic_read(&hdev->reset_info.in_reset))
status = HL_DEVICE_STATUS_IN_RESET;
- else if (hdev->needs_reset)
+ else if (hdev->reset_info.needs_reset)
status = HL_DEVICE_STATUS_NEEDS_RESET;
else if (hdev->disabled)
status = HL_DEVICE_STATUS_MALFUNCTION;
@@ -452,7 +452,7 @@ static int device_early_init(struct hl_device *hdev)
INIT_LIST_HEAD(&hdev->fpriv_ctrl_list);
mutex_init(&hdev->fpriv_list_lock);
mutex_init(&hdev->fpriv_ctrl_list_lock);
- atomic_set(&hdev->in_reset, 0);
+ atomic_set(&hdev->reset_info.in_reset, 0);
mutex_init(&hdev->clk_throttling.lock);

return 0;
@@ -544,8 +544,8 @@ static void hl_device_heartbeat(struct work_struct *work)
* status for at least one heartbeat. From this point driver restarts
* tracking future consecutive fatal errors.
*/
- if (!(atomic_read(&hdev->in_reset)))
- hdev->prev_reset_trigger = HL_RESET_TRIGGER_DEFAULT;
+ if (!(atomic_read(&hdev->reset_info.in_reset)))
+ hdev->reset_info.prev_reset_trigger = HL_RESET_TRIGGER_DEFAULT;

schedule_delayed_work(&hdev->work_heartbeat,
usecs_to_jiffies(HL_HEARTBEAT_PER_USEC));
@@ -639,12 +639,12 @@ int hl_device_set_debug_mode(struct hl_device *hdev, struct hl_ctx *ctx, bool en
goto out;
}

- if (!hdev->hard_reset_pending)
+ if (!hdev->reset_info.hard_reset_pending)
hdev->asic_funcs->halt_coresight(hdev, ctx);

hdev->in_debug = 0;

- if (!hdev->hard_reset_pending)
+ if (!hdev->reset_info.hard_reset_pending)
hdev->asic_funcs->set_clock_gating(hdev);

goto out;
@@ -722,7 +722,7 @@ int hl_device_suspend(struct hl_device *hdev)
pci_save_state(hdev->pdev);

/* Block future CS/VM/JOB completion operations */
- rc = atomic_cmpxchg(&hdev->in_reset, 0, 1);
+ rc = atomic_cmpxchg(&hdev->reset_info.in_reset, 0, 1);
if (rc) {
dev_err(hdev->dev, "Can't suspend while in reset\n");
return -EIO;
@@ -777,7 +777,7 @@ int hl_device_resume(struct hl_device *hdev)


hdev->disabled = false;
- atomic_set(&hdev->in_reset, 0);
+ atomic_set(&hdev->reset_info.in_reset, 0);

rc = hl_device_reset(hdev, HL_DRV_RESET_HARD);
if (rc) {
@@ -906,16 +906,16 @@ static void handle_reset_trigger(struct hl_device *hdev, u32 flags)
* 'reset_cause' will continue holding its 1st recorded reason!
*/
if (flags & HL_DRV_RESET_HEARTBEAT) {
- hdev->curr_reset_cause = HL_RESET_CAUSE_HEARTBEAT;
+ hdev->reset_info.curr_reset_cause = HL_RESET_CAUSE_HEARTBEAT;
cur_reset_trigger = HL_DRV_RESET_HEARTBEAT;
} else if (flags & HL_DRV_RESET_TDR) {
- hdev->curr_reset_cause = HL_RESET_CAUSE_TDR;
+ hdev->reset_info.curr_reset_cause = HL_RESET_CAUSE_TDR;
cur_reset_trigger = HL_DRV_RESET_TDR;
} else if (flags & HL_DRV_RESET_FW_FATAL_ERR) {
- hdev->curr_reset_cause = HL_RESET_CAUSE_UNKNOWN;
+ hdev->reset_info.curr_reset_cause = HL_RESET_CAUSE_UNKNOWN;
cur_reset_trigger = HL_DRV_RESET_FW_FATAL_ERR;
} else {
- hdev->curr_reset_cause = HL_RESET_CAUSE_UNKNOWN;
+ hdev->reset_info.curr_reset_cause = HL_RESET_CAUSE_UNKNOWN;
}

/*
@@ -923,11 +923,11 @@ static void handle_reset_trigger(struct hl_device *hdev, u32 flags)
* is set and if this reset is due to a fatal FW error
* device is set to an unstable state.
*/
- if (hdev->prev_reset_trigger != cur_reset_trigger) {
- hdev->prev_reset_trigger = cur_reset_trigger;
- hdev->reset_trigger_repeated = 0;
+ if (hdev->reset_info.prev_reset_trigger != cur_reset_trigger) {
+ hdev->reset_info.prev_reset_trigger = cur_reset_trigger;
+ hdev->reset_info.reset_trigger_repeated = 0;
} else {
- hdev->reset_trigger_repeated = 1;
+ hdev->reset_info.reset_trigger_repeated = 1;
}

/* If reset is due to heartbeat, device CPU is no responsive in
@@ -987,7 +987,7 @@ int hl_device_reset(struct hl_device *hdev, u32 flags)
from_hard_reset_thread = !!(flags & HL_DRV_RESET_FROM_RESET_THR);
fw_reset = !!(flags & HL_DRV_RESET_BYPASS_REQ_TO_FW);

- if (!hard_reset && !hdev->supports_soft_reset) {
+ if (!hard_reset && !hdev->asic_prop.supports_soft_reset) {
hard_instead_soft = true;
hard_reset = true;
}
@@ -1004,7 +1004,7 @@ int hl_device_reset(struct hl_device *hdev, u32 flags)
goto do_reset;
}

- if (!hard_reset && !hdev->allow_inference_soft_reset) {
+ if (!hard_reset && !hdev->asic_prop.allow_inference_soft_reset) {
hard_instead_soft = true;
hard_reset = true;
}
@@ -1024,13 +1024,14 @@ int hl_device_reset(struct hl_device *hdev, u32 flags)
*/
if (!from_hard_reset_thread) {
/* Block future CS/VM/JOB completion operations */
- rc = atomic_cmpxchg(&hdev->in_reset, 0, 1);
+ rc = atomic_cmpxchg(&hdev->reset_info.in_reset, 0, 1);
if (rc)
return 0;

handle_reset_trigger(hdev, flags);

- hdev->is_in_soft_reset = !hard_reset;
+ /* This still allows the completion of some KDMA ops */
+ hdev->reset_info.is_in_soft_reset = !hard_reset;

/* This also blocks future CS/VM/JOB completion operations */
hdev->disabled = true;
@@ -1047,7 +1048,7 @@ int hl_device_reset(struct hl_device *hdev, u32 flags)

again:
if ((hard_reset) && (!from_hard_reset_thread)) {
- hdev->hard_reset_pending = true;
+ hdev->reset_info.hard_reset_pending = true;

hdev->process_kill_trial_cnt = 0;

@@ -1128,10 +1129,11 @@ int hl_device_reset(struct hl_device *hdev, u32 flags)

if (hard_reset) {
hdev->device_cpu_disabled = false;
- hdev->hard_reset_pending = false;
+ hdev->reset_info.hard_reset_pending = false;

- if (hdev->reset_trigger_repeated &&
- (hdev->prev_reset_trigger == HL_DRV_RESET_FW_FATAL_ERR)) {
+ if (hdev->reset_info.reset_trigger_repeated &&
+ (hdev->reset_info.prev_reset_trigger ==
+ HL_DRV_RESET_FW_FATAL_ERR)) {
/* if there 2 back to back resets from FW,
* ensure driver puts the driver in a unusable state
*/
@@ -1182,7 +1184,7 @@ int hl_device_reset(struct hl_device *hdev, u32 flags)
* is required for the initialization itself
*/
hdev->disabled = false;
- hdev->is_in_soft_reset = false;
+ hdev->reset_info.is_in_soft_reset = false;

rc = hdev->asic_funcs->hw_init(hdev);
if (rc) {
@@ -1232,13 +1234,13 @@ int hl_device_reset(struct hl_device *hdev, u32 flags)
}
}

- atomic_set(&hdev->in_reset, 0);
- hdev->needs_reset = false;
+ atomic_set(&hdev->reset_info.in_reset, 0);
+ hdev->reset_info.needs_reset = false;

dev_notice(hdev->dev, "Successfully finished resetting the device\n");

if (hard_reset) {
- hdev->hard_reset_cnt++;
+ hdev->reset_info.hard_reset_cnt++;

/* After reset is done, we are ready to receive events from
* the F/W. We can't do it before because we will ignore events
@@ -1247,30 +1249,30 @@ int hl_device_reset(struct hl_device *hdev, u32 flags)
*/
hdev->asic_funcs->enable_events_from_fw(hdev);
} else if (!reset_upon_device_release) {
- hdev->soft_reset_cnt++;
+ hdev->reset_info.soft_reset_cnt++;
}

return 0;

out_err:
hdev->disabled = true;
- hdev->is_in_soft_reset = false;
+ hdev->reset_info.is_in_soft_reset = false;

if (hard_reset) {
dev_err(hdev->dev, "Failed to reset! Device is NOT usable\n");
- hdev->hard_reset_cnt++;
+ hdev->reset_info.hard_reset_cnt++;
} else if (reset_upon_device_release) {
dev_err(hdev->dev, "Failed to reset device after user release\n");
hard_reset = true;
goto again;
} else {
dev_err(hdev->dev, "Failed to do soft-reset\n");
- hdev->soft_reset_cnt++;
+ hdev->reset_info.soft_reset_cnt++;
hard_reset = true;
goto again;
}

- atomic_set(&hdev->in_reset, 0);
+ atomic_set(&hdev->reset_info.in_reset, 0);

return rc;
}
@@ -1604,10 +1606,10 @@ void hl_device_fini(struct hl_device *hdev)
*/

timeout = ktime_add_us(ktime_get(), reset_sec * 1000 * 1000);
- rc = atomic_cmpxchg(&hdev->in_reset, 0, 1);
+ rc = atomic_cmpxchg(&hdev->reset_info.in_reset, 0, 1);
while (rc) {
usleep_range(50, 200);
- rc = atomic_cmpxchg(&hdev->in_reset, 0, 1);
+ rc = atomic_cmpxchg(&hdev->reset_info.in_reset, 0, 1);
if (ktime_compare(ktime_get(), timeout) > 0) {
dev_crit(hdev->dev,
"Failed to remove device because reset function did not finish\n");
@@ -1629,7 +1631,7 @@ void hl_device_fini(struct hl_device *hdev)

take_release_locks(hdev);

- hdev->hard_reset_pending = true;
+ hdev->reset_info.hard_reset_pending = true;

hl_hwmon_fini(hdev);

diff --git a/drivers/misc/habanalabs/common/firmware_if.c b/drivers/misc/habanalabs/common/firmware_if.c
index 2cc2015c2416..6775c5c3166b 100644
--- a/drivers/misc/habanalabs/common/firmware_if.c
+++ b/drivers/misc/habanalabs/common/firmware_if.c
@@ -2371,14 +2371,14 @@ static int hl_fw_dynamic_init_cpu(struct hl_device *hdev,
if (rc)
goto protocol_err;

- if (hdev->curr_reset_cause) {
+ if (hdev->reset_info.curr_reset_cause) {
rc = hl_fw_dynamic_send_msg(hdev, fw_loader,
- HL_COMMS_RESET_CAUSE_TYPE, &hdev->curr_reset_cause);
+ HL_COMMS_RESET_CAUSE_TYPE, &hdev->reset_info.curr_reset_cause);
if (rc)
goto protocol_err;

/* Clear current reset cause */
- hdev->curr_reset_cause = HL_RESET_CAUSE_UNKNOWN;
+ hdev->reset_info.curr_reset_cause = HL_RESET_CAUSE_UNKNOWN;
}

if (!(hdev->fw_components & FW_TYPE_BOOT_CPU)) {
diff --git a/drivers/misc/habanalabs/common/habanalabs.h b/drivers/misc/habanalabs/common/habanalabs.h
index fc1bdc07a169..47eaeff9e924 100644
--- a/drivers/misc/habanalabs/common/habanalabs.h
+++ b/drivers/misc/habanalabs/common/habanalabs.h
@@ -547,6 +547,13 @@ struct hl_hints_range {
* false otherwise.
* @use_get_power_for_reset_history: To support backward compatibility for Goya
* and Gaudi
+ * @supports_soft_reset: is soft reset supported.
+ * @allow_inference_soft_reset: true if the ASIC supports soft reset that is
+ * initiated by user or TDR. This is only true
+ * in inference ASICs, as there is no real-world
+ * use-case of doing soft-reset in training (due
+ * to the fact that training runs on multiple
+ * devices)
*/
struct asic_fixed_properties {
struct hw_queue_properties *hw_queues_props;
@@ -628,6 +635,8 @@ struct asic_fixed_properties {
u8 dynamic_fw_load;
u8 gic_interrupts_enable;
u8 use_get_power_for_reset_history;
+ u8 supports_soft_reset;
+ u8 allow_inference_soft_reset;
};

/**
@@ -2446,6 +2455,39 @@ struct last_error_session_info {
u8 razwi_type;
};

+/**
+ * struct hl_reset_info - holds current device reset information.
+ * @in_reset: is device in reset flow.
+ * @soft_reset_cnt: number of soft reset since the driver was loaded.
+ * @hard_reset_cnt: number of hard reset since the driver was loaded.
+ * @is_in_soft_reset: Device is currently in soft reset process.
+ * @needs_reset: true if reset_on_lockup is false and device should be reset
+ * due to lockup.
+ * @hard_reset_pending: is there a hard reset work pending.
+ * @curr_reset_cause: saves an enumerated reset cause when a hard reset is
+ * triggered, and cleared after it is shared with preboot.
+ * @prev_reset_trigger: saves the previous trigger which caused a reset, overidden
+ * with a new value on next reset
+ * @reset_trigger_repeated: set if device reset is triggered more than once with
+ * same cause.
+ * @skip_reset_on_timeout: Skip device reset if CS has timed out, wait for it to
+ * complete instead.
+ */
+struct hl_reset_info {
+ atomic_t in_reset;
+ u32 soft_reset_cnt;
+ u32 hard_reset_cnt;
+ u8 is_in_soft_reset;
+ u8 needs_reset;
+ u8 hard_reset_pending;
+
+ u8 curr_reset_cause;
+ u8 prev_reset_trigger;
+ u8 reset_trigger_repeated;
+
+ u8 skip_reset_on_timeout;
+};
+
/**
* struct hl_device - habanalabs device structure.
* @pdev: pointer to PCI device, can be NULL in case of simulator device.
@@ -2514,6 +2556,7 @@ struct last_error_session_info {
* @state_dump_specs: constants and dictionaries needed to dump system state.
* @multi_cs_completion: array of multi-CS completion.
* @clk_throttling: holds information about current/previous clock throttling events
+ * @reset_info: holds current device reset information.
* @last_error: holds information about last session in which CS timeout or razwi error occurred.
* @stream_master_qid_arr: pointer to array with QIDs of master streams.
* @dram_used_mem: current DRAM memory consumption.
@@ -2538,13 +2581,10 @@ struct last_error_session_info {
* session.
* @open_counter: number of successful device open operations.
* @fw_poll_interval_usec: FW status poll interval in usec.
- * @in_reset: is device in reset flow.
* @card_type: Various ASICs have several card types. This indicates the card
* type of the current device.
* @major: habanalabs kernel driver major.
* @high_pll: high PLL profile frequency.
- * @soft_reset_cnt: number of soft reset since the driver was loaded.
- * @hard_reset_cnt: number of hard reset since the driver was loaded.
* @id: device minor.
* @id_control: minor of the control device
* @cpu_pci_msb_addr: 50-bit extension bits for the device CPU's 40-bit
@@ -2552,7 +2592,6 @@ struct last_error_session_info {
* @disabled: is device disabled.
* @late_init_done: is late init stage was done during initialization.
* @hwmon_initialized: is H/W monitor sensors was initialized.
- * @hard_reset_pending: is there a hard reset work pending.
* @heartbeat: is heartbeat sanity check towards CPU-CP enabled.
* @reset_on_lockup: true if a reset should be done in case of stuck CS, false
* otherwise.
@@ -2575,35 +2614,17 @@ struct last_error_session_info {
* @sync_stream_queue_idx: helper index for sync stream queues initialization.
* @collective_mon_idx: helper index for collective initialization
* @supports_coresight: is CoreSight supported.
- * @supports_soft_reset: is soft reset supported.
- * @allow_inference_soft_reset: true if the ASIC supports soft reset that is
- * initiated by user or TDR. This is only true
- * in inference ASICs, as there is no real-world
- * use-case of doing soft-reset in training (due
- * to the fact that training runs on multiple
- * devices)
* @supports_cb_mapping: is mapping a CB to the device's MMU supported.
- * @needs_reset: true if reset_on_lockup is false and device should be reset
- * due to lockup.
* @process_kill_trial_cnt: number of trials reset thread tried killing
* user processes
* @device_fini_pending: true if device_fini was called and might be
* waiting for the reset thread to finish
* @supports_staged_submission: true if staged submissions are supported
- * @curr_reset_cause: saves an enumerated reset cause when a hard reset is
- * triggered, and cleared after it is shared with preboot.
- * @prev_reset_trigger: saves the previous trigger which caused a reset, overidden
- * with a new value on next reset
- * @reset_trigger_repeated: set if device reset is triggered more than once with
- * same cause.
- * @skip_reset_on_timeout: Skip device reset if CS has timed out, wait for it to
- * complete instead.
* @device_cpu_is_halted: Flag to indicate whether the device CPU was already
* halted. We can't halt it again because the COMMS
* protocol will throw an error. Relevant only for
* cases where Linux was not loaded to device CPU
* @supports_wait_for_multi_cs: true if wait for multi CS is supported
- * @is_in_soft_reset: Device is currently in soft reset process.
* @is_compute_ctx_active: Whether there is an active compute context executing.
*/
struct hl_device {
@@ -2678,6 +2699,8 @@ struct hl_device {
struct hl_clk_throttle clk_throttling;
struct last_error_session_info last_error;

+ struct hl_reset_info reset_info;
+
u32 *stream_master_qid_arr;
atomic64_t dram_used_mem;
u64 timeout_jiffies;
@@ -2689,20 +2712,16 @@ struct hl_device {
u64 last_open_session_duration_jif;
u64 open_counter;
u64 fw_poll_interval_usec;
- atomic_t in_reset;
ktime_t last_successful_open_ktime;
enum cpucp_card_types card_type;
u32 major;
u32 high_pll;
- u32 soft_reset_cnt;
- u32 hard_reset_cnt;
u16 id;
u16 id_control;
u16 cpu_pci_msb_addr;
u8 disabled;
u8 late_init_done;
u8 hwmon_initialized;
- u8 hard_reset_pending;
u8 heartbeat;
u8 reset_on_lockup;
u8 dram_default_page_mapping;
@@ -2719,21 +2738,13 @@ struct hl_device {
u8 sync_stream_queue_idx;
u8 collective_mon_idx;
u8 supports_coresight;
- u8 supports_soft_reset;
- u8 allow_inference_soft_reset;
u8 supports_cb_mapping;
- u8 needs_reset;
u8 process_kill_trial_cnt;
u8 device_fini_pending;
u8 supports_staged_submission;
- u8 curr_reset_cause;
- u8 prev_reset_trigger;
- u8 reset_trigger_repeated;
- u8 skip_reset_on_timeout;
u8 device_cpu_is_halted;
u8 supports_wait_for_multi_cs;
u8 stream_master_qid_arr_size;
- u8 is_in_soft_reset;
u8 is_compute_ctx_active;

/* Parameters for bring-up */
diff --git a/drivers/misc/habanalabs/common/habanalabs_drv.c b/drivers/misc/habanalabs/common/habanalabs_drv.c
index aa4e07b1f839..690b763c7a95 100644
--- a/drivers/misc/habanalabs/common/habanalabs_drv.c
+++ b/drivers/misc/habanalabs/common/habanalabs_drv.c
@@ -289,8 +289,8 @@ static int fixup_device_params(struct hl_device *hdev)
hdev->fw_poll_interval_usec = HL_FW_STATUS_POLL_INTERVAL_USEC;

hdev->stop_on_err = true;
- hdev->curr_reset_cause = HL_RESET_CAUSE_UNKNOWN;
- hdev->prev_reset_trigger = HL_RESET_TRIGGER_DEFAULT;
+ hdev->reset_info.curr_reset_cause = HL_RESET_CAUSE_UNKNOWN;
+ hdev->reset_info.prev_reset_trigger = HL_RESET_TRIGGER_DEFAULT;

/* Enable only after the initialization of the device */
hdev->disabled = true;
diff --git a/drivers/misc/habanalabs/common/habanalabs_ioctl.c b/drivers/misc/habanalabs/common/habanalabs_ioctl.c
index 7ddf70a0ca8a..3ba3a8ffda3e 100644
--- a/drivers/misc/habanalabs/common/habanalabs_ioctl.c
+++ b/drivers/misc/habanalabs/common/habanalabs_ioctl.c
@@ -269,8 +269,8 @@ static int get_reset_count(struct hl_device *hdev, struct hl_info_args *args)
if ((!max_size) || (!out))
return -EINVAL;

- reset_count.hard_reset_cnt = hdev->hard_reset_cnt;
- reset_count.soft_reset_cnt = hdev->soft_reset_cnt;
+ reset_count.hard_reset_cnt = hdev->reset_info.hard_reset_cnt;
+ reset_count.soft_reset_cnt = hdev->reset_info.soft_reset_cnt;

return copy_to_user(out, &reset_count,
min((size_t) max_size, sizeof(reset_count))) ? -EFAULT : 0;
diff --git a/drivers/misc/habanalabs/common/irq.c b/drivers/misc/habanalabs/common/irq.c
index 6454ea12bf3a..1b6bdc900c26 100644
--- a/drivers/misc/habanalabs/common/irq.c
+++ b/drivers/misc/habanalabs/common/irq.c
@@ -249,7 +249,7 @@ irqreturn_t hl_irq_handler_eq(int irq, void *arg)
*/
dma_rmb();

- if (hdev->disabled && !hdev->is_in_soft_reset) {
+ if (hdev->disabled && !hdev->reset_info.is_in_soft_reset) {
dev_warn(hdev->dev, "Device disabled but received an EQ event\n");
goto skip_irq;
}
diff --git a/drivers/misc/habanalabs/common/memory.c b/drivers/misc/habanalabs/common/memory.c
index b8596846f3dc..c1eefaebacb6 100644
--- a/drivers/misc/habanalabs/common/memory.c
+++ b/drivers/misc/habanalabs/common/memory.c
@@ -2624,7 +2624,7 @@ void hl_vm_ctx_fini(struct hl_ctx *ctx)
* Clearly something went wrong on hard reset so no point in printing
* another side effect error
*/
- if (!hdev->hard_reset_pending && !hash_empty(ctx->mem_hash))
+ if (!hdev->reset_info.hard_reset_pending && !hash_empty(ctx->mem_hash))
dev_dbg(hdev->dev,
"user released device without removing its memory mappings\n");

diff --git a/drivers/misc/habanalabs/common/sysfs.c b/drivers/misc/habanalabs/common/sysfs.c
index 1af568e46f46..45c715325e2a 100644
--- a/drivers/misc/habanalabs/common/sysfs.c
+++ b/drivers/misc/habanalabs/common/sysfs.c
@@ -211,7 +211,7 @@ static ssize_t soft_reset_store(struct device *dev,
goto out;
}

- if (!hdev->allow_inference_soft_reset) {
+ if (!hdev->asic_prop.allow_inference_soft_reset) {
dev_err(hdev->dev, "Device does not support inference soft-reset\n");
goto out;
}
@@ -303,7 +303,7 @@ static ssize_t soft_reset_cnt_show(struct device *dev,
{
struct hl_device *hdev = dev_get_drvdata(dev);

- return sprintf(buf, "%d\n", hdev->soft_reset_cnt);
+ return sprintf(buf, "%d\n", hdev->reset_info.soft_reset_cnt);
}

static ssize_t hard_reset_cnt_show(struct device *dev,
@@ -311,7 +311,7 @@ static ssize_t hard_reset_cnt_show(struct device *dev,
{
struct hl_device *hdev = dev_get_drvdata(dev);

- return sprintf(buf, "%d\n", hdev->hard_reset_cnt);
+ return sprintf(buf, "%d\n", hdev->reset_info.hard_reset_cnt);
}

static ssize_t max_power_show(struct device *dev, struct device_attribute *attr,
@@ -478,7 +478,7 @@ int hl_sysfs_init(struct hl_device *hdev)
return rc;
}

- if (!hdev->allow_inference_soft_reset)
+ if (!hdev->asic_prop.allow_inference_soft_reset)
return 0;

rc = device_add_groups(hdev->dev, hl_dev_inference_attr_groups);
@@ -495,7 +495,7 @@ void hl_sysfs_fini(struct hl_device *hdev)
{
device_remove_groups(hdev->dev, hl_dev_attr_groups);

- if (!hdev->allow_inference_soft_reset)
+ if (!hdev->asic_prop.allow_inference_soft_reset)
return;

device_remove_groups(hdev->dev, hl_dev_inference_attr_groups);
diff --git a/drivers/misc/habanalabs/gaudi/gaudi.c b/drivers/misc/habanalabs/gaudi/gaudi.c
index b3431eac4f04..013c6da2e3ca 100644
--- a/drivers/misc/habanalabs/gaudi/gaudi.c
+++ b/drivers/misc/habanalabs/gaudi/gaudi.c
@@ -4325,7 +4325,7 @@ static void gaudi_hw_fini(struct hl_device *hdev, bool hard_reset, bool fw_reset
* In case watchdog hasn't expired but we still got HB, then this won't do any
* damage.
*/
- if (hdev->curr_reset_cause == HL_RESET_CAUSE_HEARTBEAT) {
+ if (hdev->reset_info.curr_reset_cause == HL_RESET_CAUSE_HEARTBEAT) {
if (hdev->asic_prop.hard_reset_done_by_fw)
hl_fw_ask_hard_reset_without_linux(hdev);
else
@@ -6564,7 +6564,7 @@ static u64 gaudi_read_pte(struct hl_device *hdev, u64 addr)
{
struct gaudi_device *gaudi = hdev->asic_specific;

- if (hdev->hard_reset_pending)
+ if (hdev->reset_info.hard_reset_pending)
return U64_MAX;

return readq(hdev->pcie_bar[HBM_BAR_ID] +
@@ -6575,7 +6575,7 @@ static void gaudi_write_pte(struct hl_device *hdev, u64 addr, u64 val)
{
struct gaudi_device *gaudi = hdev->asic_specific;

- if (hdev->hard_reset_pending)
+ if (hdev->reset_info.hard_reset_pending)
return;

writeq(val, hdev->pcie_bar[HBM_BAR_ID] +
@@ -8341,7 +8341,7 @@ static int gaudi_mmu_invalidate_cache(struct hl_device *hdev, bool is_hard,
int rc;

if (!(gaudi->hw_cap_initialized & HW_CAP_MMU) ||
- hdev->hard_reset_pending)
+ hdev->reset_info.hard_reset_pending)
return 0;

if (hdev->pldm)
diff --git a/drivers/misc/habanalabs/goya/goya.c b/drivers/misc/habanalabs/goya/goya.c
index f4473013f1ee..fbcc7bbf44b3 100644
--- a/drivers/misc/habanalabs/goya/goya.c
+++ b/drivers/misc/habanalabs/goya/goya.c
@@ -1033,8 +1033,8 @@ static int goya_sw_init(struct hl_device *hdev)

spin_lock_init(&goya->hw_queues_lock);
hdev->supports_coresight = true;
- hdev->supports_soft_reset = true;
- hdev->allow_inference_soft_reset = true;
+ hdev->asic_prop.supports_soft_reset = true;
+ hdev->asic_prop.allow_inference_soft_reset = true;
hdev->supports_wait_for_multi_cs = false;

hdev->asic_funcs->set_pci_memory_regions(hdev);
@@ -4477,7 +4477,7 @@ static u64 goya_read_pte(struct hl_device *hdev, u64 addr)
{
struct goya_device *goya = hdev->asic_specific;

- if (hdev->hard_reset_pending)
+ if (hdev->reset_info.hard_reset_pending)
return U64_MAX;

return readq(hdev->pcie_bar[DDR_BAR_ID] +
@@ -4488,7 +4488,7 @@ static void goya_write_pte(struct hl_device *hdev, u64 addr, u64 val)
{
struct goya_device *goya = hdev->asic_specific;

- if (hdev->hard_reset_pending)
+ if (hdev->reset_info.hard_reset_pending)
return;

writeq(val, hdev->pcie_bar[DDR_BAR_ID] +
@@ -5308,7 +5308,7 @@ static int goya_mmu_invalidate_cache(struct hl_device *hdev, bool is_hard,
int rc;

if (!(goya->hw_cap_initialized & HW_CAP_MMU) ||
- hdev->hard_reset_pending)
+ hdev->reset_info.hard_reset_pending)
return 0;

/* no need in L1 only invalidation in Goya */
--
2.25.1