[PATCH 02/10] serial: 8250_bcm7271: Use platform_get_irq() to get the interrupt

[Lad Prabhakar]

platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
---
 drivers/tty/serial/8250/8250_bcm7271.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_bcm7271.c b/drivers/tty/serial/8250/8250_bcm7271.c
index 5163d60756b7..7ecfcc650d28 100644
--- a/drivers/tty/serial/8250/8250_bcm7271.c
+++ b/drivers/tty/serial/8250/8250_bcm7271.c
@@ -941,7 +941,7 @@ static int brcmuart_probe(struct platform_device *pdev)
 	struct brcmuart_priv *priv;
 	struct clk *baud_mux_clk;
 	struct uart_8250_port up;
-	struct resource *irq;
+	int irq;
 	void __iomem *membase = NULL;
 	resource_size_t mapbase = 0;
 	u32 clk_rate = 0;
@@ -952,11 +952,9 @@ static int brcmuart_probe(struct platform_device *pdev)
 		"uart", "dma_rx", "dma_tx", "dma_intr2", "dma_arb"
 	};
 
-	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (!irq) {
-		dev_err(dev, "missing irq\n");
-		return -EINVAL;
-	}
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
 	priv = devm_kzalloc(dev, sizeof(struct brcmuart_priv),
 			GFP_KERNEL);
 	if (!priv)
@@ -1044,7 +1042,7 @@ static int brcmuart_probe(struct platform_device *pdev)
 	up.port.dev = dev;
 	up.port.mapbase = mapbase;
 	up.port.membase = membase;
-	up.port.irq = irq->start;
+	up.port.irq = irq;
 	up.port.handle_irq = brcmuart_handle_irq;
 	up.port.regshift = 2;
 	up.port.iotype = of_device_is_big_endian(np) ?
-- 
2.17.1