[PATCH 29/43] kmsan: handle memory sent to/from USB

[Alexander Potapenko]

Depending on the value of is_out kmsan_handle_urb() KMSAN either
marks the data copied to the kernel from a USB device as initialized,
or checks the data sent to the device for being initialized.

Signed-off-by: Alexander Potapenko <glider@xxxxxxxxxx>

---

Link: https://linux-review.googlesource.com/id/Ifa67fb72015d4de14c30e971556f99fc8b2ee506
---
 drivers/usb/core/urb.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index 30727729a44cc..0e84acc9aea53 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -8,6 +8,7 @@
 #include <linux/bitops.h>
 #include <linux/slab.h>
 #include <linux/log2.h>
+#include <linux/kmsan-checks.h>
 #include <linux/usb.h>
 #include <linux/wait.h>
 #include <linux/usb/hcd.h>
@@ -426,6 +427,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
 			URB_SETUP_MAP_SINGLE | URB_SETUP_MAP_LOCAL |
 			URB_DMA_SG_COMBINED);
 	urb->transfer_flags |= (is_out ? URB_DIR_OUT : URB_DIR_IN);
+	kmsan_handle_urb(urb, is_out);
 
 	if (xfertype != USB_ENDPOINT_XFER_CONTROL &&
 			dev->state < USB_STATE_CONFIGURED)
-- 
2.34.1.173.g76aa8bc2d0-goog