Re: [PATCH] usb: dwc3: add sprs_ctrl_trans_quirk

[Yaqin Pan]

Hi Thinh:
> Add a quirk to set GUCTL.SPRSCTRLTRANSEN bit.
>
>Can you explain the problem in more detail?

sure i will resend the  patch 
>
>> For example, TF card reader (aaaa:8816):
>> usb 1-1: new high-speed USB device number 2 using xhci-hcd
>> usb 1-1: device descriptor read/all, error -110
>> From the usb analyzer, always return NAK in the data phase.
>
>And how this change help to resolve this issue.

Some device are slow in responding to Control transfers. Scheduling mulitiple 
transactions in one microframe/frame can cause the devices to misbehave.
if this qurik is enabled, the host controller schedules transations for 
a Control transfer in defferent microframes/frame.

>
>Also note in the patch that this is for host mode.

yes, this is only for host mode
>
>>
>> Signed-off-by: Yaqin Pan <akingchen@xxxxxxxx>
>> ---
>> drivers/usb/dwc3/core.c | 4 ++++
>> drivers/usb/dwc3/core.h | 3 +++
>> 2 files changed, 7 insertions(+)
>>
>> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
>> index ba74ad7f6995..93ac2c79a2c0 100644
>> --- a/drivers/usb/dwc3/core.c
>> +++ b/drivers/usb/dwc3/core.c
>> @@ -1071,6 +1071,8 @@ static int dwc3_core_init(struct dwc3 *dwc)
>> * packet with Retry=1 & Nump != 0)
>> */
>> reg |= DWC3_GUCTL_HSTINAUTORETRY;
>> + if (dwc->sprs_ctrl_trans_quirk)
>> + reg |= DWC3_GUCTL_SPRSCTRLTRANSEN;
>>
>> dwc3_writel(dwc->regs, DWC3_GUCTL, reg);
>> }
>> @@ -1377,6 +1379,8 @@ static void dwc3_get_properties(struct dwc3 *dwc)
>>
>> dwc->dis_split_quirk = device_property_read_bool(dev,
>> "snps,dis-split-quirk");
>> + dwc->sprs_ctrl_trans_quirk = device_property_read_bool(dev,
>> + "snps,sprs-ctrl-trans-quirk");
>
>Since you're adding a new device property, please add another patch to
>document it in Documentation/devicetree/bindings/usb
I will upload a patch serials for that
>
I will renew the patch,thanks~
Yaqin