[RFC PATCH devicetree 08/10] arm64: dts: lx2160a: rename the "interrupt-map" of the extirq node to "fsl,extirq-map"

[Vladimir Oltean]

In the discussions here:
https://lore.kernel.org/all/CAMuHMdXM34nNz1nfowNqDvdsdg+d69Bo3_ufs6fbcq65iYd5-A@xxxxxxxxxxxxxx/T/#m3449390080c5a0c8f59b8f8286a87e31e093b98b
Marc Zyngier points out that the ls-extirq driver should have never used
the "interrupt-map" keyword for mapping its channels to GIC interrupts.

This change modifies the device trees for LX2160A and LX2162A to use a
driver-specific OF property for that purpose. The change is intended to
target stable kernels, to accelerate the conversion and ultimate removal
of the improperly used "interrupt-map" property.

Note that "interrupt-map-mask" isn't needed now (nor was it needed
before, it was just there to keep an apparent compatibility in form with
the reserved "interrupt-map" property). So delete it.

Fixes: 332b6a79b415 ("arm64: dts: lx2160a: add DT node for external interrupt lines")
Signed-off-by: Vladimir Oltean <vladimir.oltean@xxxxxxx>
---
 arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index c4b1a59ba424..c12cc402b566 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -679,7 +679,7 @@ extirq: interrupt-controller@14 {
 				#address-cells = <0>;
 				interrupt-controller;
 				reg = <0x14 4>;
-				interrupt-map =
+				fsl,extirq-map =
 					<0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
 					<1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
 					<2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
@@ -692,7 +692,6 @@ extirq: interrupt-controller@14 {
 					<9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
 					<10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
 					<11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-map-mask = <0xffffffff 0x0>;
 			};
 		};
 
-- 
2.25.1