[PATCH 5.15 101/171] i2c: mpc: Use atomic read and fix break condition

[Greg Kroah-Hartman]

From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>

commit a74c313aca266fab0d1d1a72becbb8b7b5286b6e upstream.

Maxime points out that the polling code in mpc_i2c_isr should use the
_atomic API because it is called in an irq context and that the
behaviour of the MCF bit is that it is 1 when the byte transfer is
complete. All of this means the original code was effectively a
udelay(100).

Fix this by using readb_poll_timeout_atomic() and removing the negation
of the break condition.

Fixes: 4a8ac5e45cda ("i2c: mpc: Poll for MCF")
Reported-by: Maxime Bizon <mbizon@xxxxxxxxxx>
Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
Tested-by: Maxime Bizon <mbizon@xxxxxxxxxx>
Signed-off-by: Wolfram Sang <wsa@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/i2c/busses/i2c-mpc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -636,7 +636,7 @@ static irqreturn_t mpc_i2c_isr(int irq,
 	status = readb(i2c->base + MPC_I2C_SR);
 	if (status & CSR_MIF) {
 		/* Wait up to 100us for transfer to properly complete */
-		readb_poll_timeout(i2c->base + MPC_I2C_SR, status, !(status & CSR_MCF), 0, 100);
+		readb_poll_timeout_atomic(i2c->base + MPC_I2C_SR, status, status & CSR_MCF, 0, 100);
 		writeb(0, i2c->base + MPC_I2C_SR);
 		mpc_i2c_do_intr(i2c, status);
 		return IRQ_HANDLED;