[PATCH 5.4 33/92] PCI: aardvark: Update comment about disabling link training

From: Greg Kroah-Hartman
Date: Mon Nov 29 2021 - 16:12:38 EST


From: Pali Rohár <pali@xxxxxxxxxx>

commit 1d1cd163d0de22a4041a6f1aeabcf78f80076539 upstream.

According to PCI Express Base Specifications (rev 4.0, 6.6.1
"Conventional reset"), after fundamental reset a 100ms delay is needed
prior to enabling link training.

Update comment in code to reflect this requirement.

Link: https://lore.kernel.org/r/20201202184659.3795-1-pali@xxxxxxxxxx
Signed-off-by: Pali Rohár <pali@xxxxxxxxxx>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
Signed-off-by: Marek Behún <kabel@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/pci/controller/pci-aardvark.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)

--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -339,7 +339,14 @@ static void advk_pcie_issue_perst(struct
if (!pcie->reset_gpio)
return;

- /* PERST does not work for some cards when link training is enabled */
+ /*
+ * As required by PCI Express spec (PCI Express Base Specification, REV.
+ * 4.0 PCI Express, February 19 2014, 6.6.1 Conventional Reset) a delay
+ * for at least 100ms after de-asserting PERST# signal is needed before
+ * link training is enabled. So ensure that link training is disabled
+ * prior de-asserting PERST# signal to fulfill that PCI Express spec
+ * requirement.
+ */
reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
reg &= ~LINK_TRAINING_EN;
advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);