[PATCH v2 1/2] dt-bindings: interrupt-controller: Add Qualcomm MPM support

From: Shawn Guo
Date: Fri Nov 26 2021 - 04:41:35 EST


It adds DT binding support for Qualcomm MPM interrupt controller.

Signed-off-by: Shawn Guo <shawn.guo@xxxxxxxxxx>
---
.../interrupt-controller/qcom,mpm.yaml | 72 +++++++++++++++++++
1 file changed, 72 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml

diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml b/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml
new file mode 100644
index 000000000000..22e87fe2eb8e
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/qcom,mpm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcom MPM Interrupt Controller
+
+maintainers:
+ - Shawn Guo <shawn.guo@xxxxxxxxxx>
+
+description:
+ Qualcomm Technologies Inc. SoCs based on the RPM architecture have a
+ MSM Power Manager (MPM) that is in always-on domain. In addition to managing
+ resources during sleep, the hardware also has an interrupt controller that
+ monitors the interrupts when the system is asleep, wakes up the APSS when
+ one of these interrupts occur and replays it to GIC interrupt controller
+ after GIC becomes operational.
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: qcom,qcm2290-mpm
+
+ reg:
+ maxItems: 1
+ description:
+ Specifies the base address and size of vMPM registers in RPM MSG RAM.
+
+ interrupts:
+ maxItems: 1
+ description:
+ Specify the IRQ used by RPM to wakeup APSS.
+
+ mboxes:
+ maxItems: 1
+ description:
+ Specify the mailbox used to notify RPM for writing vMPM registers.
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+ description:
+ The first cell is the MPM pin number for the interrupt, and the second
+ is the trigger type.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - mboxes
+ - interrupt-controller
+ - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ mpm: interrupt-controller@45f01b8 {
+ compatible = "qcom,qcm2290-mpm";
+ interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+ reg = <0x45f01b8 0x1000>;
+ mboxes = <&apcs_glb 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&intc>;
+ };
--
2.17.1