[PATCH v6 00/15] Add support for X86/ACPI camera sensor/PMIC setup with clk and regulator platform data

From: Hans de Goede
Date: Thu Nov 25 2021 - 11:56:32 EST


Here is v6 of my patch-set adding support for camera sensor connected to a
TPS68470 PMIC on x86/ACPI devices.

Changes in v6:
- Add support for the VCM (Voice Coil Motor) controlling the focus of
the back/main sensor camera lens:
- Patch 3 and patches 13-15 are new patches for this
- While working on this I learned that the VIO regulator is an always on
regulator and must be configured at the same voltage as VSIO, the
tps68470-regulator driver and the constraints have been updated for this
- Addressed clk-tps68470 driver review-remarks
- Some minor tweaks based on review-remarks from Andy
- Add Andy's Reviewed-by to all patches which were also in v5

I'm quite happy with how this works now, so from my pov this is ready
for merging now.

Patch 2 already has acks for merging through another tree. Patch 3
"i2c: acpi: Add i2c_acpi_new_device_by_fwnode() function" is new,
Mika, Wolfram may we have your Ack for merging this one through
Rafael's ACPI or through my platform/drivers/x86 tree too ?

Once we have acks to merge both i2c-core-acpi.c through another tree,
there are 2 options:

a. 1. Patches 1-3 merged by Rafael, Rafael provides an IM branch
2. I create an IM branch with patches 4 + 7-12
3. clk + regulator maintainers merge my IM branch + clk / regulator patch
4. media maintainers merge Rafael's IM branch + media patches
b. 1. I create an IM branch with patches 1-4 + 7-12 (with Rafael's ack for 1)
2. clk / regulator / media maintainers merge my IM branch + their resp. patches

Assuming Rafael does not foresee any conflicts caused by the few small ACPI
patches I believe that going with plan b would be best.

Rafael is plan b. ok with you ? You did already Ack patch 1 but IIRC that
was not specifically for merging it through another tree.

Regards,

Hans


p.s.

For the record here is part of the old cover-letter of v5:

Changes in v5:
- Update regulator_init_data in patch 10/11 to include the VCM regulator
- Address various small review remarks from Andy
- Make a couple of functions / vars static in the clk + regulator drivers
Reported-by: kernel test robot <lkp@xxxxxxxxx>

Changes in v4:
[PATCH 01/11] ACPI: delay enumeration of devices with a _DEP
pointing to an INT3472 device:
- Move the acpi_dev_ready_for_enumeration() check to acpi_bus_attach()
(replacing the acpi_device_is_present() check there)

[PATCH 04/11] regulator: Introduce tps68470-regulator driver:
- Make the top comment block use c++ style comments
- Drop the bogus builtin regulator_init_data
- Make the driver enable the PMIC clk when enabling the Core buck
regulator, this switching regulator needs the PLL to be on
- Kconfig: add || COMPILE_TEST, fix help text

[PATCH 05/11] clk: Introduce clk-tps68470 driver
- Kconfig: select REGMAP_I2C, add || COMPILE_TEST, fix help text
- tps68470_clk_prepare(): Wait for the PLL to lock before returning
- tps68470_clk_unprepare(): Remove unnecessary clearing of divider regs
- tps68470_clk_probe(): Use devm_clk_hw_register()
- Misc. small cleanups

The clk and regulator frameworks expect clk/regulator consumer-devices
to have info about the consumed clks/regulators described in the device's
fw_node, but on ACPI this info is missing.

This series worksaround this by providing platform_data with the info to
the TPS68470 clk/regulator MFD cells.

Patches 1 - 2 deal with a probe-ordering problem this introduces,
since the lookups are only registered when the provider-driver binds,
trying to get these clks/regulators before then results in a -ENOENT
error for clks and a dummy regulator for regulators. See the patches
for more details.

Patch 3 adds a header file which adds tps68470_clk_platform_data and
tps68470_regulator_platform_data structs. The futher patches depend on
this new header file.

Patch 4 + 5 add the TPS68470 clk and regulator drivers

Patches 6 - 11 Modify the INT3472 driver which instantiates the MFD cells to
provide the necessary platform-data.


Daniel Scally (1):
platform/x86: int3472: Enable I2c daisy chain

Hans de Goede (14):
ACPI: delay enumeration of devices with a _DEP pointing to an INT3472
device
i2c: acpi: Use acpi_dev_ready_for_enumeration() helper
i2c: acpi: Add i2c_acpi_new_device_by_fwnode() function
platform_data: Add linux/platform_data/tps68470.h file
regulator: Introduce tps68470-regulator driver
clk: Introduce clk-tps68470 driver
platform/x86: int3472: Split into 2 drivers
platform/x86: int3472: Add get_sensor_adev_and_name() helper
platform/x86: int3472: Pass tps68470_clk_platform_data to the
tps68470-regulator MFD-cell
platform/x86: int3472: Pass tps68470_regulator_platform_data to the
tps68470-regulator MFD-cell
platform/x86: int3472: Deal with probe ordering issues
media: ipu3-cio2: Defer probing until the PMIC is fully setup
media: ipu3-cio2: Call cio2_bridge_init() before anything else
media: ipu3-cio2: Add support for instantiating i2c-clients for VCMs

drivers/acpi/scan.c | 37 ++-
drivers/clk/Kconfig | 8 +
drivers/clk/Makefile | 1 +
drivers/clk/clk-tps68470.c | 257 ++++++++++++++++++
drivers/i2c/i2c-core-acpi.c | 23 +-
drivers/media/pci/intel/ipu3/cio2-bridge.c | 92 +++++++
drivers/media/pci/intel/ipu3/cio2-bridge.h | 16 +-
drivers/media/pci/intel/ipu3/ipu3-cio2-main.c | 10 +-
drivers/platform/x86/intel/int3472/Makefile | 9 +-
...lk_and_regulator.c => clk_and_regulator.c} | 2 +-
drivers/platform/x86/intel/int3472/common.c | 82 ++++++
.../{intel_skl_int3472_common.h => common.h} | 6 +-
...ntel_skl_int3472_discrete.c => discrete.c} | 51 ++--
.../intel/int3472/intel_skl_int3472_common.c | 106 --------
...ntel_skl_int3472_tps68470.c => tps68470.c} | 99 ++++++-
drivers/platform/x86/intel/int3472/tps68470.h | 25 ++
.../x86/intel/int3472/tps68470_board_data.c | 145 ++++++++++
drivers/regulator/Kconfig | 9 +
drivers/regulator/Makefile | 1 +
drivers/regulator/tps68470-regulator.c | 201 ++++++++++++++
include/acpi/acpi_bus.h | 5 +-
include/linux/i2c.h | 17 +-
include/linux/mfd/tps68470.h | 11 +
include/linux/platform_data/tps68470.h | 35 +++
24 files changed, 1080 insertions(+), 168 deletions(-)
create mode 100644 drivers/clk/clk-tps68470.c
rename drivers/platform/x86/intel/int3472/{intel_skl_int3472_clk_and_regulator.c => clk_and_regulator.c} (99%)
create mode 100644 drivers/platform/x86/intel/int3472/common.c
rename drivers/platform/x86/intel/int3472/{intel_skl_int3472_common.h => common.h} (94%)
rename drivers/platform/x86/intel/int3472/{intel_skl_int3472_discrete.c => discrete.c} (91%)
delete mode 100644 drivers/platform/x86/intel/int3472/intel_skl_int3472_common.c
rename drivers/platform/x86/intel/int3472/{intel_skl_int3472_tps68470.c => tps68470.c} (54%)
create mode 100644 drivers/platform/x86/intel/int3472/tps68470.h
create mode 100644 drivers/platform/x86/intel/int3472/tps68470_board_data.c
create mode 100644 drivers/regulator/tps68470-regulator.c
create mode 100644 include/linux/platform_data/tps68470.h

--
2.33.1