Re: [PATCH v4 0/6] add fixes to pass DP Link Layer compliance test cases

[Dmitry Baryshkov]

On 11/08/2021 19:30, Kuogee Hsieh wrote:
> drm/msm/dp: add fixes to pass DP Link Layer compliance test cases
>
> Kuogee Hsieh (6):
>    drm/msm/dp: use dp_ctrl_off_link_stream during PHY compliance test run
>    drm/msm/dp: reduce link rate if failed at link training 1
>    drm/msm/dp: reset aux controller after dp_aux_cmd_fifo_tx() failed.
>    drm/msm/dp: replug event is converted into an unplug followed by an
>      plug events
>    drm/msm/dp: return correct edid checksum after corrupted edid checksum
>      read
>    drm/msm/dp: do not end dp link training until video is ready
>
>   drivers/gpu/drm/msm/dp/dp_aux.c     |   3 +
>   drivers/gpu/drm/msm/dp/dp_ctrl.c    | 137 +++++++++++++++++++++++-------------
>   drivers/gpu/drm/msm/dp/dp_display.c |  14 ++--
>   drivers/gpu/drm/msm/dp/dp_panel.c   |   9 ++-
>   4 files changed, 102 insertions(+), 61 deletions(-)

Previous version of this patchset is already merged. If there are any 
changes on top of it, please submit the incremental diff/fixup.


--
With best wishes
Dmitry