[PATCH 5.10 011/154] RDMA/bnxt_re: Check if the vlan is valid before reporting

From: Greg Kroah-Hartman
Date: Wed Nov 24 2021 - 08:27:57 EST


From: Selvin Xavier <selvin.xavier@xxxxxxxxxxxx>

[ Upstream commit 6bda39149d4b8920fdb8744090653aca3daa792d ]

When VF is configured with default vlan, HW strips the vlan from the
packet and driver receives it in Rx completion. VLAN needs to be reported
for UD work completion only if the vlan is configured on the host. Add a
check for valid vlan in the UD receive path.

Link: https://lore.kernel.org/r/1631709163-2287-12-git-send-email-selvin.xavier@xxxxxxxxxxxx
Signed-off-by: Selvin Xavier <selvin.xavier@xxxxxxxxxxxx>
Signed-off-by: Jason Gunthorpe <jgg@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/infiniband/hw/bnxt_re/ib_verbs.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/infiniband/hw/bnxt_re/ib_verbs.c b/drivers/infiniband/hw/bnxt_re/ib_verbs.c
index 441952a5eca4a..10d77f50f818b 100644
--- a/drivers/infiniband/hw/bnxt_re/ib_verbs.c
+++ b/drivers/infiniband/hw/bnxt_re/ib_verbs.c
@@ -3368,8 +3368,11 @@ static void bnxt_re_process_res_ud_wc(struct bnxt_re_qp *qp,
struct ib_wc *wc,
struct bnxt_qplib_cqe *cqe)
{
+ struct bnxt_re_dev *rdev;
+ u16 vlan_id = 0;
u8 nw_type;

+ rdev = qp->rdev;
wc->opcode = IB_WC_RECV;
wc->status = __rc_to_ib_wc_status(cqe->status);

@@ -3381,9 +3384,12 @@ static void bnxt_re_process_res_ud_wc(struct bnxt_re_qp *qp,
memcpy(wc->smac, cqe->smac, ETH_ALEN);
wc->wc_flags |= IB_WC_WITH_SMAC;
if (cqe->flags & CQ_RES_UD_FLAGS_META_FORMAT_VLAN) {
- wc->vlan_id = (cqe->cfa_meta & 0xFFF);
- if (wc->vlan_id < 0x1000)
- wc->wc_flags |= IB_WC_WITH_VLAN;
+ vlan_id = (cqe->cfa_meta & 0xFFF);
+ }
+ /* Mark only if vlan_id is non zero */
+ if (vlan_id && bnxt_re_check_if_vlan_valid(rdev, vlan_id)) {
+ wc->vlan_id = vlan_id;
+ wc->wc_flags |= IB_WC_WITH_VLAN;
}
nw_type = (cqe->flags & CQ_RES_UD_FLAGS_ROCE_IP_VER_MASK) >>
CQ_RES_UD_FLAGS_ROCE_IP_VER_SFT;
--
2.33.0