[PATCH 4.9 060/207] MIPS: lantiq: dma: reset correct number of channel

From: Greg Kroah-Hartman
Date: Wed Nov 24 2021 - 07:22:09 EST


From: Aleksander Jan Bajkowski <olek2@xxxxx>

[ Upstream commit 5ca9ce2ba4d5884cd94d1a856c675ab1242cd242 ]

Different SoCs have a different number of channels, e.g .:
* amazon-se has 10 channels,
* danube+ar9 have 20 channels,
* vr9 has 28 channels,
* ar10 has 24 channels.

We can read the ID register and, depending on the reported
number of channels, reset the appropriate number of channels.

Signed-off-by: Aleksander Jan Bajkowski <olek2@xxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
arch/mips/lantiq/xway/dma.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/arch/mips/lantiq/xway/dma.c b/arch/mips/lantiq/xway/dma.c
index d89a9bcf92c85..fc9eff29d8ff0 100644
--- a/arch/mips/lantiq/xway/dma.c
+++ b/arch/mips/lantiq/xway/dma.c
@@ -40,6 +40,7 @@
#define LTQ_DMA_PCTRL 0x44
#define LTQ_DMA_IRNEN 0xf4

+#define DMA_ID_CHNR GENMASK(26, 20) /* channel number */
#define DMA_DESCPT BIT(3) /* descriptor complete irq */
#define DMA_TX BIT(8) /* TX channel direction */
#define DMA_CHAN_ON BIT(0) /* channel on / off bit */
@@ -50,7 +51,6 @@
#define DMA_POLL BIT(31) /* turn on channel polling */
#define DMA_CLK_DIV4 BIT(6) /* polling clock divider */
#define DMA_2W_BURST BIT(1) /* 2 word burst length */
-#define DMA_MAX_CHANNEL 20 /* the soc has 20 channels */
#define DMA_ETOP_ENDIANNESS (0xf << 8) /* endianness swap etop channels */
#define DMA_WEIGHT (BIT(17) | BIT(16)) /* default channel wheight */

@@ -217,7 +217,7 @@ ltq_dma_init(struct platform_device *pdev)
{
struct clk *clk;
struct resource *res;
- unsigned id;
+ unsigned int id, nchannels;
int i;

res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -239,17 +239,18 @@ ltq_dma_init(struct platform_device *pdev)
ltq_dma_w32(0, LTQ_DMA_IRNEN);

/* reset/configure each channel */
- for (i = 0; i < DMA_MAX_CHANNEL; i++) {
+ id = ltq_dma_r32(LTQ_DMA_ID);
+ nchannels = ((id & DMA_ID_CHNR) >> 20);
+ for (i = 0; i < nchannels; i++) {
ltq_dma_w32(i, LTQ_DMA_CS);
ltq_dma_w32(DMA_CHAN_RST, LTQ_DMA_CCTRL);
ltq_dma_w32(DMA_POLL | DMA_CLK_DIV4, LTQ_DMA_CPOLL);
ltq_dma_w32_mask(DMA_CHAN_ON, 0, LTQ_DMA_CCTRL);
}

- id = ltq_dma_r32(LTQ_DMA_ID);
dev_info(&pdev->dev,
"Init done - hw rev: %X, ports: %d, channels: %d\n",
- id & 0x1f, (id >> 16) & 0xf, id >> 20);
+ id & 0x1f, (id >> 16) & 0xf, nchannels);

return 0;
}
--
2.33.0