[PATCH v3 2/2] wcn36xx: fix RX BD rate mapping for 5GHz legacy rates

From: Benjamin Li
Date: Wed Nov 03 2021 - 21:06:15 EST


The linear mapping between the BD rate field and the driver's 5GHz
legacy rates table (wcn_5ghz_rates) does not only apply for the latter
four rates -- it applies to all eight rates.

Fixes: 6ea131acea98 ("wcn36xx: Fix warning due to bad rate_idx")
Signed-off-by: Benjamin Li <benl@xxxxxxxxxxxx>
---
drivers/net/wireless/ath/wcn36xx/txrx.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/wcn36xx/txrx.c b/drivers/net/wireless/ath/wcn36xx/txrx.c
index f0a9f069a92a9..dd58dde8c8363 100644
--- a/drivers/net/wireless/ath/wcn36xx/txrx.c
+++ b/drivers/net/wireless/ath/wcn36xx/txrx.c
@@ -272,7 +272,6 @@ int wcn36xx_rx_skb(struct wcn36xx *wcn, struct sk_buff *skb)
const struct wcn36xx_rate *rate;
struct ieee80211_hdr *hdr;
struct wcn36xx_rx_bd *bd;
- struct ieee80211_supported_band *sband;
u16 fc, sn;

/*
@@ -350,12 +349,11 @@ int wcn36xx_rx_skb(struct wcn36xx *wcn, struct sk_buff *skb)
status.enc_flags = rate->encoding_flags;
status.bw = rate->bw;
status.rate_idx = rate->mcs_or_legacy_index;
- sband = wcn->hw->wiphy->bands[status.band];
status.nss = 1;

if (status.band == NL80211_BAND_5GHZ &&
status.encoding == RX_ENC_LEGACY &&
- status.rate_idx >= sband->n_bitrates) {
+ status.rate_idx >= 4) {
/* no dsss rates in 5Ghz rates table */
status.rate_idx -= 4;
}
--
2.25.1