RE: [PATCH 0/3] arm64: dts: visconti: Add Toshiba Visconti TMPV7708 VisROBO VRB board support

[nobuhiro1.iwamatsu]

Hi,

> -----Original Message-----
> From: Yuji Ishikawa [mailto:yuji2.ishikawa@xxxxxxxxxxxxx]
> Sent: Thursday, October 14, 2021 6:27 PM
> To: Rob Herring <robh+dt@xxxxxxxxxx>; iwamatsu nobuhiro(岩松 信洋 □ＳＷＣ◯ＡＣＴ) <nobuhiro1.iwamatsu@xxxxxxxxxxxxx>
> Cc: agrawal punit(アグラワル プニト □ＳＷＣ◯ＡＣＴ) <punit1.agrawal@xxxxxxxxxxxxx>; ishikawa yuji(石川 悠司 ○ＲＤ
> Ｃ□ＡＩＴＣ○ＥＡ開) <yuji2.ishikawa@xxxxxxxxxxxxx>; devicetree@xxxxxxxxxxxxxxx;
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
> Subject: [PATCH 0/3] arm64: dts: visconti: Add Toshiba Visconti TMPV7708 VisROBO VRB board support
> 
> Hi,
> 
> This series is a device tree for a new board
> with Toshiba's ARM SoC, Visconti[0].
> The board system, called VisROBO, consists of two parts:
> VRC SoM and VRB base board.
> 
> Best regards,
>   Yuji
> 
> [0]: https://toshiba.semicon-storage.com/ap-en/semiconductor/product/image-recognition-processors-visconti.html
> 
> Yuji Ishikawa (3):
>   arm64: dts: visconti: Add 150MHz fixed clock to TMPV7708 SoC
>   dt-bindings: arm: toshiba: Add the TMPV7708 VisROBO VRB board
>   arm64: dts: visconti: Add DTS for the VisROBO board
> 
>  .../devicetree/bindings/arm/toshiba.yaml      |  1 +
>  arch/arm64/boot/dts/toshiba/Makefile          |  1 +
>  .../boot/dts/toshiba/tmpv7708-visrobo-vrb.dts | 61 +++++++++++++++++++
>  .../dts/toshiba/tmpv7708-visrobo-vrc.dtsi     | 44 +++++++++++++
>  arch/arm64/boot/dts/toshiba/tmpv7708.dtsi     |  7 +++
>  5 files changed, 114 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrb.dts
>  create mode 100644 arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrc.dtsi
> 

Applied, thanks.

Best regards,
  Nobuhiro