Re: [RFC PATCH 2/9] dt-bindings: memory-controller: Add apple,mcc binding

[Krzysztof Kozlowski]

On 11/10/2021 18:57, Hector Martin wrote:
> This device represents the memory controller in Apple SoCs, and is
> chiefly in charge of adjusting performance characteristics according to
> system demand.
> 
> Signed-off-by: Hector Martin <marcan@xxxxxxxxx>
> ---
>  .../memory-controllers/apple,mcc.yaml         | 80 +++++++++++++++++++
>  .../opp/apple,mcc-operating-points.yaml       | 62 ++++++++++++++
>  2 files changed, 142 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/memory-controllers/apple,mcc.yaml
>  create mode 100644 Documentation/devicetree/bindings/opp/apple,mcc-operating-points.yaml
> 
> diff --git a/Documentation/devicetree/bindings/memory-controllers/apple,mcc.yaml b/Documentation/devicetree/bindings/memory-controllers/apple,mcc.yaml
> new file mode 100644
> index 000000000000..0774f10e65ed
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/memory-controllers/apple,mcc.yaml
> @@ -0,0 +1,80 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/memory-controllers/apple,mcc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Apple SoC MCC memory controller performance controls
> +
> +maintainers:
> +  - Hector Martin <marcan@xxxxxxxxx>
> +
> +description: |
> +  Apple SoCs contain a multichannel memory controller that can have its
> +  configuration changed to adjust to changing performance requirements from
> +  the rest of the SoC. This node represents the controller and provides a
> +  power domain provider that downstream devices can use to adjust the memory
> +  controller performance level.
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - apple,t8103-mcc
> +      - const: apple,mcc
> +
> +  reg:
> +    maxItems: 1
> +
> +  "#power-domain-cells":
> +    const: 0
> +
> +  operating-points-v2:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    description:
> +      A reference to the OPP table describing the memory controller performance
> +      levels. Each OPP node should contain an `apple,memory-perf-config`
> +      property that contains the configuration values for that performance
> +      level.
> +
> +  apple,num-channels:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      The number of memory channels in use.
> +
> +required:
> +  - compatible
> +  - reg
> +  - "#power-domain-cells"
> +  - operating-points-v2
> +  - apple,num-channels
> +
> +additionalProperties: false
> +
> +examples:
> +  # See clock/apple,cluster-clock.yaml for an example of downstream usage.
> +  - |
> +    mcc_opp: opp-table-2 {
> +        compatible = "operating-points-v2";

apple,mcc-operating-points?

> +
> +        mcc_lowperf: opp0 {
> +            opp-level = <0>;
> +            apple,memory-perf-config = <0x813057f 0x1800180>;
> +        };
> +        mcc_highperf: opp1 {
> +            opp-level = <1>;
> +            apple,memory-perf-config = <0x133 0x55555340>;
> +        };
> +    };
> +    soc {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        mcc: memory-controller@200200000 {
> +            compatible = "apple,t8103-mcc", "apple,mcc";
> +            #power-domain-cells = <0>;
> +            reg = <0x2 0x200000 0x0 0x200000>;
> +            operating-points-v2 = <&mcc_opp>;
> +            apple,num-channels = <8>;
> +        };
> +    };
> diff --git a/Documentation/devicetree/bindings/opp/apple,mcc-operating-points.yaml b/Documentation/devicetree/bindings/opp/apple,mcc-operating-points.yaml
> new file mode 100644
> index 000000000000..babf27841bb7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/opp/apple,mcc-operating-points.yaml
> @@ -0,0 +1,62 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/opp/apple,mcc-operating-points.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Apple SoC memory controller OPP bindings
> +
> +maintainers:
> +  - Hector Martin <marcan@xxxxxxxxx>
> +
> +description: |
> +  Apple SoCs can have their memory controller performance adjusted depending on
> +  system requirements. These performance states are represented by specific
> +  memory controller register values. The apple-mcc driver uses these values
> +  to change the MCC performance.
> +
> +allOf:
> +  - $ref: opp-v2-base.yaml#
> +
> +properties:
> +  compatible:
> +    const: apple,mcc-operating-points
> +
> +required:
> +  - compatible
> +
> +patternProperties:
> +  "opp[0-9]+":
> +    type: object
> +
> +    properties:
> +      opp-level: true

You don't need to mention it.

> +      apple,memory-perf-config:
> +        $ref: /schemas/types.yaml#/definitions/uint32-array
> +        description: |
> +          A pair of register values used to configure this performance state.
> +        minItems: 2
> +        maxItems: 2
> +
> +    required:
> +      - opp-level
> +      - apple,memory-perf-config
> +
> +    unevaluatedProperties: false
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    mcc_opp: opp-table-2 {
> +        compatible = "operating-points-v2";

Different compatible.

> +
> +        mcc_lowperf: opp0 {
> +            opp-level = <0>;
> +            apple,memory-perf-config = <0x813057f 0x1800180>;
> +        };
> +        mcc_highperf: opp1 {
> +            opp-level = <1>;
> +            apple,memory-perf-config = <0x133 0x55555340>;
> +        };
> +    };
> 


Best regards,
Krzysztof