Re: [PATCH v4 1/7] dt-bindings: iio: stm32-adc: add generic channel binding

[Rob Herring]

On Mon, 11 Oct 2021 17:57:11 +0200, Olivier Moysan wrote:
> Add ADC generic channel binding. This binding should
> be used as an alternate to legacy channel properties
> whenever possible.
> ADC generic channel binding allows to identify supported
> internal channels through the following reserved label names:
> "vddcore", "vrefint" and "vbat".
> This binding also allows to set a different sampling time
> for each channel.
> 
> Signed-off-by: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
> ---
>  .../bindings/iio/adc/st,stm32-adc.yaml        | 100 ++++++++++++++++--
>  1 file changed, 93 insertions(+), 7 deletions(-)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.example.dt.yaml: adc@48003000: adc@100:channel@13: 'st,min-sample-time-nsecs' does not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.example.dt.yaml: adc@48003000: adc@100:channel@14: 'st,min-sample-time-nsecs' does not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.example.dt.yaml: adc@48003000: adc@100:channel@15: 'st,min-sample-time-nsecs' does not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1539385

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.